Revision notes

Work Energy and Power: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Work done by a force

W = F d cos θ. Force perpendicular to the displacement does no work. Area under the F-x graph is the work done.

— Remember
  • Work needs a displacement; holding a load still does no work on it.
  • The sign of work depends on the angle between force and displacement.
  • Net work is the sum of the work done by all the forces.
Read the full lesson

Lesson 2

Kinetic energy and the work-energy theorem

W_net = ΔKE = ½mv² − ½mu². KE = p²/2m. For equal braking force, stopping distance is proportional to v².

— Remember
  • KE depends on the square of the speed.
  • Use the work-energy theorem when force and distance are known but time is not.
  • Equal KE with different masses means the lighter body has less momentum.
Read the full lesson

Lesson 3

Potential energy and conservation of mechanical energy

Without friction: ½mu² + mgh₁ = ½mv² + mgh₂. Spring energy = ½kx². Speed after falling h from rest: v = √(2gh).

— Remember
  • Mechanical energy is conserved only when no friction or drag does work.
  • Only height differences matter for gravitational PE.
  • The speed from a free drop does not depend on mass.
Read the full lesson

Lesson 4

Power and electrical energy units

P = W/t = F v. 1 hp = 746 W. 1 kWh = 3.6 × 10⁶ J. kWh is a unit of energy, not of power.

— Remember
  • Power is the rate of doing work; watt = joule per second.
  • At constant speed, engine force equals the resistance, so P = Fv.
  • Convert kWh to joules by multiplying by 3.6 × 10⁶.
Read the full lesson

Lesson 5

Collisions, efficiency and energy conversion

Momentum is conserved in all collisions. Kinetic energy is conserved only in elastic collisions. Efficiency = useful output / input × 100%.

— Remember
  • Always conserve momentum first; check kinetic energy only to classify the collision.
  • Equal masses in a head-on elastic collision exchange velocities.
  • Efficiency is always below 100%; the lost energy appears as heat.
Read the full lesson

Lesson 6

Work by variable forces: graphs and spring problems

Areas to remember
Shape of the graphWork
Rectangle (constant force F over d)F d
Triangle (force rising from 0 to F over d)½ F d
Trapezium (force from F₁ to F₂ over d)½ (F₁ + F₂) d

Work = area under the F-x graph (below the axis counts as negative). Spring from x₁ to x₂: ½k(x₂² − x₁²).

— Rule to remember
  • Split a graph into simple shapes and add the areas, with signs.
  • Spring work between two positions is ½k(x₂² − x₁²), not ½k(x₂ − x₁)².
  • Net work equals the change in kinetic energy.
Read the full lesson

Lesson 7

Conservation of mechanical energy: slides, pendulums, projectiles and springs

Initial (KE + PE) = final (KE + PE). The speed after a fall depends only on the height fallen and the starting speed.

— Rule to remember
  • Compare the start and the end; ignore the path.
  • For a pendulum, speed comes from energy and tension from energy plus circular motion.
  • For a block on a spring, include the fall during compression in the gravitational term.
Read the full lesson

Lesson 8

Power problems: lifts, pumps, vehicles and the P = Fv shortcut

P = W ÷ t = F v. Efficiency = output power ÷ input power. 1 kWh = 3.6 × 10⁶ J.

— Rule to remember
  • Choose P = W ÷ t for lifting and pumping, and P = F v for vehicles and steady motion.
  • In an accelerating lift, the cable force is m(g + a).
  • Power at an instant uses the instantaneous speed; the average power uses the average speed.
Read the full lesson

Lesson 9

Friction and energy loss: inclines, skids and mixed problem set

Work against friction = friction force × path length. Mechanical energy lost = friction work. Stopping distance on a rough level surface: d = v² ÷ 2μg.

— Rule to remember
  • Add the friction loss to the energy balance: initial energy − f d = final energy.
  • Friction always reduces mechanical energy; use the path length.
  • On a level surface the stopping distance is v² ÷ (2μg), independent of the mass.
Read the full lesson

Privacy · Terms · Refunds · Delivery