• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Matter in Our Surroundings

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions before you look at any answer. Write your choices on paper, then read every explanation, including those for questions you got right, and note which lessons to revisit.

Final self-assessment

  1. 1. Which list contains only examples of matter?

    1. Air, kindness, water
    2. Smell of perfume, dust, steam
    3. Heat, light, sand
    4. Thought, stone, milk
    Show answer

    Answer: B. A smell is carried by particles, dust is solid particles and steam is water vapour: all have mass and take up space. Kindness and thought are ideas; heat and light are forms of energy, not matter.

  2. 2. A crystal of a coloured salt is dissolved and the solution is diluted 4 times, each time by adding 10 mL to 90 mL of water. How strong is the final solution compared with the first?

    1. 1/40
    2. 1/400
    3. 1/1000
    4. 1/10 000
    Show answer

    Answer: D. Each step makes the solution 1/10 as strong. Four steps: (1/10)⁴ = 1/10 000. The colour can still be seen faintly, showing the particles are extremely small and very numerous.

  3. 3. How many litres are there in 0.2 m³?

    1. 200 L
    2. 20 L
    3. 2000 L
    4. 0.002 L
    Show answer

    Answer: A. 1 m³ = 1000 L, so 0.2 m³ = 0.2 × 1000 = 200 L.

  4. 4. Which observation shows that particles of matter are continuously moving?

    1. A nail is hard to break
    2. Ice floats on water
    3. The smell of a lit incense stick fills a room
    4. A rubber band regains its shape
    Show answer

    Answer: C. The smell spreads by diffusion, which happens only because the particles of the smoke and of air keep moving and intermix on their own. The other observations are about attraction, density and elasticity.

  5. 5. Arrange in increasing order of the force of attraction between particles: salt, petrol, oxygen.

    1. salt < petrol < oxygen
    2. oxygen < petrol < salt
    3. petrol < oxygen < salt
    4. oxygen < salt < petrol
    Show answer

    Answer: B. Attraction is weakest in a gas (oxygen), moderate in a liquid (petrol) and strongest in a solid (salt).

  6. 6. Why does an ink drop spread through still water, and why faster in warm water?

    1. Particles diffuse; higher temperature gives them more kinetic energy
    2. Water pushes the ink; warm water is denser
    3. Ink is lighter than water; warm water is lighter still
    4. Ink particles attract water particles more when cold
    Show answer

    Answer: A. Ink and water particles move into each other's spaces on their own, which is diffusion. In warm water the particles have more kinetic energy and move faster, so diffusion is faster.

  7. 7. Which property is shown by solids but NOT by liquids or gases?

    1. Fixed volume
    2. Ability to diffuse
    3. Having mass
    4. Fixed shape and rigidity
    Show answer

    Answer: D. Liquids also have a fixed volume, and all three states have mass and show diffusion. Only solids have a fixed shape and are rigid.

  8. 8. A small block has a mass of 39 g and a volume of 5 cm³. What is its density in kg/m³?

    1. 7.8 kg/m³
    2. 195 kg/m³
    3. 7800 kg/m³
    4. 780 kg/m³
    Show answer

    Answer: C. Density = 39 g ÷ 5 cm³ = 7.8 g/cm³. Since 1 g/cm³ = 1000 kg/m³, this is 7.8 × 1000 = 7800 kg/m³ (close to the standard density of iron).

  9. 9. Air in a sealed syringe can be pushed in easily, but water in a sealed syringe cannot. This shows that

    1. gas particles are far apart compared with liquid particles
    2. gas particles have no motion
    3. water has no particles
    4. air has no mass
    Show answer

    Answer: A. Gases are highly compressible because there is a lot of space between their particles. Liquid particles are much closer, so water hardly compresses.

  10. 10. What is the physical state of water at 0 °C?

    1. Always solid
    2. Solid or liquid, depending on whether heat is being added or removed
    3. Always gas
    4. Always liquid
    Show answer

    Answer: B. 0 °C (273 K) is the melting point of ice. At this temperature ice and water can both exist: ice melts if heat is supplied and water freezes if heat is removed, while the temperature stays at 0 °C.

  11. 11. Convert 15 °C to kelvin and 400 K to Celsius.

    1. 258 K and 673 °C
    2. 288 °C and 127 K
    3. 15 K and 400 °C
    4. 288 K and 127 °C
    Show answer

    Answer: D. K = °C + 273, so 15 + 273 = 288 K. °C = K − 273, so 400 − 273 = 127 °C.

  12. 12. Using the standard latent heat of fusion of ice, about 3.34 × 10⁵ J/kg, how much heat melts 2 kg of ice at 0 °C into water at 0 °C?

    1. 1.67 × 10⁵ J
    2. 3.34 × 10⁵ J
    3. 6.68 × 10⁵ J
    4. 6.68 × 10⁶ J
    Show answer

    Answer: C. Heat = mass × latent heat = 2 kg × 3.34 × 10⁵ J/kg = 6.68 × 10⁵ J. Check: 6.68 ÷ 2 = 3.34. The temperature stays at 0 °C throughout.

  13. 13. Solid carbon dioxide is called dry ice because

    1. at 1 atmosphere it changes directly into gas without becoming liquid
    2. it does not feel cold
    3. it is made from dried water
    4. it melts into water
    Show answer

    Answer: A. Solid CO₂ is stored under high pressure. When the pressure falls to 1 atmosphere it sublimes, turning straight into gas, so it never wets anything as ordinary ice does.

  14. 14. Under which conditions will a wet towel dry fastest?

    1. Folded, in a closed room, on a humid day
    2. Spread out, in still air, on a cold humid day
    3. Folded, under a fan, on a hot day
    4. Spread out, under a fan, on a hot dry day
    Show answer

    Answer: D. Evaporation is fastest with a large surface area (spread out), wind (fan), high temperature (hot) and low humidity (dry). Only this choice has all four.

  15. 15. Acetone poured on the palm makes it feel cold. Which statement explains this?

    1. Acetone is always at a lower temperature than the body
    2. Evaporating acetone takes heat from the palm
    3. Acetone particles stop moving on the skin
    4. Acetone reacts with skin to absorb light
    Show answer

    Answer: B. Acetone evaporates quickly. The particles that escape take energy (latent heat of vaporisation) from the skin, so the palm loses heat and feels cold. This is the cooling effect of evaporation.

Questions 1-3: lesson 1 (matter and particles, units). Questions 4-6: lesson 2 (characteristics of particles and diffusion). Questions 7-9: lesson 3 (states of matter and density). Questions 10-13: lesson 4 (change of state, kelvin, latent heat, pressure). Questions 14-15: lesson 5 (evaporation and cooling).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery