- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Sound
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions before you look at any answer. Write your choice and your working on paper, then read every explanation, including those for questions you got right.
Final self-assessment
-
1. A sitar string is plucked and the sound reaches a listener. Which sequence is correct?
- String vibrates → air particles pass on compressions and rarefactions → eardrum vibrates
- Air particles travel from the string to the ear → eardrum vibrates
- Eardrum vibrates → air vibrates → string vibrates
- String gives out light → light becomes sound in the ear
Show answer
Answer: A. The vibrating string disturbs the air next to it; the air particles pass compressions and rarefactions on without travelling across the room; these make the eardrum vibrate.
-
2. Sound cannot travel through a vacuum because:
- a vacuum is too cold
- sound is a transverse wave
- there are no particles to pass on the vibrations
- sound travels only in solids
Show answer
Answer: C. Sound is a mechanical wave carried by particles of a medium setting their neighbours moving. A vacuum has no particles, so the disturbance cannot be passed on.
-
3. As a sound wave passes, the density of air at a point rises above normal and then falls below normal. The region of low density is a:
- compression
- crest
- node
- rarefaction
Show answer
Answer: D. A rarefaction is a region where particles are spread apart, giving low density and low pressure. Compressions (shown as crests on the graph) are regions of high density.
-
4. A dot is marked on a slinky carrying a longitudinal wave. The dot:
- travels along with the wave to the far end
- moves back and forth along the slinky's length about one place
- moves up and down at right angles to the slinky
- stays completely still
Show answer
Answer: B. In a longitudinal wave each part of the medium oscillates about its rest position parallel to the direction of travel; it does not travel with the wave.
-
5. A source makes 18 000 vibrations in one minute. What is the time period of the sound?
- 300 s
- 0.033 s
- 0.0033 s
- 18 000 s
Show answer
Answer: C. Frequency = 18 000 ÷ 60 s = 300 Hz. T = 1/ν = 1 ÷ 300 ≈ 0.0033 s. 300 is the frequency, not the period.
-
6. Two sound waves in the same air have frequencies 200 Hz and 400 Hz. Which statement is correct?
- The 400 Hz wave travels twice as fast
- The 400 Hz wave has twice the wavelength
- The 200 Hz wave has the shorter time period
- Both travel at the same speed and the 400 Hz wave has half the wavelength
Show answer
Answer: D. In a given medium all frequencies travel at the same speed. Since v = λν is fixed, doubling ν halves λ. The 200 Hz wave has the longer period (1/200 s vs 1/400 s).
-
7. Striking a drum harder makes the sound louder because:
- the amplitude of the vibration increases
- the frequency increases
- the speed of sound increases
- the wavelength becomes zero
Show answer
Answer: A. Loudness depends on amplitude, which depends on the force with which the object is made to vibrate. Striking harder gives a larger amplitude and more energy, but not a different speed.
-
8. A sound wave has speed 340 m s⁻¹ and wavelength 1.6 cm. Its frequency and type are:
- 212.5 Hz, audible
- 21 250 Hz, ultrasound
- 2125 Hz, audible
- 544 Hz, audible
Show answer
Answer: B. λ = 1.6 cm = 0.016 m. ν = v ÷ λ = 340 ÷ 0.016 = 21 250 Hz. This is above 20 000 Hz, so it is ultrasound and cannot be heard by people. Forgetting to convert cm to m gives the wrong 212.5 Hz; multiplying gives 544.
-
9. A worker taps one end of a straight iron rail 1190 m long. Using the textbook's value for iron (5950 m s⁻¹), how long does the sound take to travel along the rail to the other end?
- 3.44 s
- 5 s
- 0.2 s
- 0.002 s
Show answer
Answer: C. Time = distance ÷ speed = 1190 ÷ 5950 = 0.2 s. Check: 5950 × 0.2 = 1190. Through air (346 m s⁻¹) the same distance would take about 3.44 s, which is why the sound through the rail arrives first.
-
10. A man standing between two cliffs claps. He hears one echo after 1 s and another after 3 s. With sound at 340 m s⁻¹, how far apart are the cliffs?
- 680 m
- 340 m
- 1360 m
- 510 m
Show answer
Answer: A. Near cliff: 340 × 1 ÷ 2 = 170 m. Far cliff: 340 × 3 ÷ 2 = 510 m. They are on opposite sides, so the gap is 170 + 510 = 680 m.
-
11. Which of these does NOT use multiple reflection of sound?
- A megaphone
- A stethoscope
- A curved soundboard behind a stage
- A hearing aid
Show answer
Answer: D. A hearing aid works electronically: microphone, amplifier and speaker. Megaphones, stethoscopes and soundboards guide sound by reflecting it repeatedly.
-
12. A stone is dropped into a well 45 m deep. The splash is heard 3.13 s after release (g = 10 m s⁻²). How long does the sound take to come up, and what speed does that give?
- 0.13 s, about 346 m s⁻¹
- 3 s, 15 m s⁻¹
- 0.13 s, 5.85 m s⁻¹
- 3.13 s, about 14 m s⁻¹
Show answer
Answer: A. Fall time: h = ½gt², so 45 = 5t², t² = 9, t = 3 s. Sound time = 3.13 − 3 = 0.13 s. Speed = 45 ÷ 0.13 ≈ 346 m s⁻¹.
-
13. A dog can hear a whistle that most adults cannot. The whistle's frequency is most likely:
- 10 Hz
- 500 Hz
- 23 kHz
- 15 Hz
Show answer
Answer: C. Adults hear up to about 20 kHz; the textbook says dogs hear up to about 25 kHz. A 23 kHz whistle lies in that gap. 10 Hz and 15 Hz are infrasound that dogs are not described as hearing either; 500 Hz is audible to adults.
-
14. Which animal pair, according to the chapter, produces infrasound?
- Bats and dolphins
- Whales and elephants
- Bats and porpoises
- Moths and bats
Show answer
Answer: B. The chapter names whales and elephants (and rhinoceroses) as producing infrasound. Bats, dolphins and porpoises produce ultrasound; certain moths can hear it.
-
15. Why are tiny electronic parts often cleaned with ultrasound?
- Ultrasound melts the dirt
- Ultrasound makes the solution boil
- The parts are placed in a cleaning solution and the high-frequency waves shake dust and grease loose even in hard-to-reach places
- Ultrasound dissolves the metal surface
Show answer
Answer: C. In ultrasonic cleaning the objects sit in a cleaning solution; the high-frequency waves make particles of dust, grease and dirt come off, even from spiral or odd-shaped parts.
Questions 1-3: lesson 1 (production and propagation). Questions 4-6: lesson 2 (longitudinal waves and the measures of a wave). Questions 7-9: lesson 3 (pitch, loudness, quality and speed). Questions 10-12: lesson 4 (reflection, echo and reverberation). Questions 13-15: lesson 5 (range of hearing and ultrasound). Revisit the lesson for any question you got wrong and rework its examples.
Sign in to keep track of the lessons you finish.