- Practice
- About 15 min
- 5 practice questions
Longitudinal waves and the measures of a sound wave
Tell longitudinal from transverse waves, and use wavelength, frequency, time period and amplitude, including ν = 1/T, to describe a sound wave.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why sound waves are longitudinal.
- Contrast longitudinal and transverse waves with examples.
- Define wavelength, frequency, time period and amplitude, with units.
- Use ν = 1/T to change between frequency and time period.
The PSEB textbook uses a slinky (a long, loose spring) to show what a sound wave looks like. Stretch it between two people and give one end a sharp push: a bunched-up region of coils runs along it. Push and pull repeatedly and you get alternate crowded and spread-out regions, just like compressions and rarefactions in air.
Longitudinal and transverse waves
If you mark a dot on the slinky, the dot moves back and forth parallel to the direction in which the disturbance travels. The coils do not move along the slinky; they simply oscillate about their rest positions. A wave in which the particles of the medium vibrate along the direction of propagation is a longitudinal wave. Sound waves in air are longitudinal.
In a transverse wave, the particles move up and down about their mean positions, perpendicular to the direction in which the wave travels. Ripples spreading on a pond after a pebble is dropped are the textbook's example. Light is also a transverse wave, but it is not a mechanical wave: its oscillations are not of particles of a medium.
Two kinds of wave
-
Longitudinal wave
- Particles vibrate along the direction of travel
- Forms compressions and rarefactions
- Example: sound in air, pulses on a slinky
-
Transverse wave
- Particles vibrate at right angles to the direction of travel
- Forms crests and troughs
- Example: ripples on water; light (not mechanical)
Drawing a sound wave as a graph
As a sound wave passes, the density and pressure of the medium rise above and fall below their average values. Plotting density (or pressure) against distance gives a wavy curve. Compressions are shown by the upper parts of the curve, called crests; rarefactions by the lower parts, called troughs. This graph lets us define the measures of a wave.
| Quantity | Meaning | Symbol | SI unit |
|---|---|---|---|
| Wavelength | Distance between two consecutive compressions (or two consecutive rarefactions) | λ (lambda) | metre (m) |
| Frequency | Number of complete oscillations (of density or pressure) per unit time | ν (nu) | hertz (Hz) |
| Time period | Time for one complete oscillation, or for two consecutive compressions to pass a point | T | second (s) |
| Amplitude | Size of the maximum disturbance on either side of the mean value | A | Unit of density or pressure |
The hertz is named after Heinrich Rudolph Hertz (1857-1894), the German physicist who confirmed Maxwell's electromagnetic theory by experiment. 1 Hz means one complete oscillation per second, and 1 kHz = 1000 Hz. If you could count the compressions passing you each second, that number would be the frequency.
Frequency and time period
If ν oscillations take 1 second, each one takes 1/ν seconds. So the time period and the frequency are reciprocals of each other.
ν = 1/T and T = 1/ν. A higher frequency means a shorter time period.
Worked example 1: period of a tuning fork
Question: A tuning fork vibrates at 250 Hz. What is the time period of the sound it produces? Working: T = 1/ν = 1 ÷ 250 Hz = 0.004 s (that is, 4 milliseconds). Check: 250 × 0.004 = 1.
Worked example 2: frequency from the period
Question: Compressions of a sound wave pass a microphone every 0.002 s. Find the frequency. Working: The time between consecutive compressions is the time period, T = 0.002 s. ν = 1/T = 1 ÷ 0.002 = 500 Hz.
Worked example 3: counting vibrations
Question: A loudspeaker cone vibrates at 60 Hz. How many times does it vibrate in half a minute? Working: 60 Hz means 60 vibrations each second. Half a minute = 30 s. Number of vibrations = 60 × 30 = 1800.
Key takeaways: sound waves are longitudinal: particles vibrate along the direction of travel, forming compressions and rarefactions. Transverse waves vibrate at right angles to the direction of travel. A sound wave is described by wavelength λ (m), frequency ν (Hz), time period T (s) and amplitude A, with ν = 1/T.
Check your understanding
-
1. In a longitudinal wave, the particles of the medium vibrate:
- along the direction in which the wave travels
- at right angles to the direction of travel
- in circles
- not at all
Show answer
Answer: A. That is the definition of a longitudinal wave, such as sound in air. Vibration at right angles to the direction of travel describes a transverse wave.
-
2. The distance between two consecutive rarefactions of a sound wave is its:
- amplitude
- frequency
- wavelength
- time period
Show answer
Answer: C. Wavelength λ is the distance between two consecutive compressions or two consecutive rarefactions. Frequency is a count per second and time period is a time; amplitude is the size of the disturbance.
-
3. A sound has a time period of 0.01 s. What is its frequency?
- 0.01 Hz
- 10 Hz
- 1000 Hz
- 100 Hz
Show answer
Answer: D. ν = 1/T = 1 ÷ 0.01 s = 100 Hz. Check: 100 × 0.01 = 1.
-
4. Which is an example of a transverse wave given in the chapter?
- A pulse sent along a slinky by pushing it
- Ripples spreading on a pond
- Sound travelling in air
- Sound travelling in water
Show answer
Answer: B. On the water surface the particles move up and down while the ripple spreads outwards, so it is transverse. Pushing a slinky and sound in air or water make longitudinal waves.
-
5. A source vibrates at 200 Hz. How many vibrations does it make in one minute?
- 200
- 3.33
- 12 000
- 1200
Show answer
Answer: C. 200 Hz means 200 vibrations per second. One minute = 60 s, so 200 × 60 = 12 000 vibrations. 3.33 comes from dividing instead of multiplying.
Sign in to keep track of the lessons you finish.