- Practice
- About 16 min
- 5 practice questions
Pitch, loudness, quality and the speed of sound
Link pitch to frequency, loudness to amplitude and quality to the mix of frequencies, tell intensity from loudness, and use v = λν to solve speed problems in different media.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain pitch, loudness and quality (timbre) of sound.
- Tell intensity and loudness apart.
- Derive and use v = λν.
- Explain how the speed of sound depends on the medium and its temperature.
In an orchestra a violin and a flute may play together. Both sounds travel through the same air at the same speed and reach us at the same time, yet we can tell them apart. The PSEB textbook explains this through the characteristics of sound: pitch, loudness and quality.
Pitch depends on frequency
Pitch is how the brain interprets the frequency of a sound. The faster the source vibrates, the higher the frequency and the higher the pitch. A high-pitched sound has more compressions and rarefactions passing a point each second. A small bird's chirp is high-pitched; a lion's roar is low-pitched.
Loudness depends on amplitude
Loudness is decided mainly by the amplitude of the wave, and the amplitude depends on how hard the object is made to vibrate. Tap a table lightly and you hear a soft sound; strike it hard and the sound is loud, because more energy goes into the wave. As sound spreads out from its source, its amplitude and loudness decrease. A louder sound carries more energy and can be heard farther away.
Intensity is the amount of sound energy passing each second through unit area. Intensity is a physical quantity; loudness is the ear's response to it. Two sounds of equal intensity may not seem equally loud, because the ear detects some sounds better than others.
Quality (timbre)
Quality or timbre is the characteristic that lets us tell two sounds apart even when they have the same pitch and loudness. It is how you recognise a friend's voice in the dark. A sound of a single frequency is a tone; a sound made of a mixture of several frequencies is a note. Pleasant sound is said to be of rich quality, like music; unpleasant sound is noise.
Characteristics of sound
-
Pitch
- Depends on frequency
- Faster vibration = higher pitch
-
Loudness
- Depends on amplitude
- Harder vibration = louder
-
Quality (timbre)
- Depends on the mix of frequencies
- Tells a flute from a violin at the same pitch
The speed of sound: v = λν
The speed of sound is the distance travelled per unit time by a point on the wave, such as a compression. In one time period T the wave moves forward one wavelength λ. So speed v = λ ÷ T. Since 1/T = ν, this gives v = λν. In a given medium under the same conditions, the speed is the same for all frequencies: a higher frequency simply means a shorter wavelength.
Speed = wavelength × frequency: v = λ ν. Also v = distance ÷ time.
Worked example 1: finding the speed
Question: A sound of frequency 680 Hz has a wavelength of 0.5 m in air. Find its speed. Working: v = λν = 0.5 m × 680 Hz = 340 m s⁻¹.
Worked example 2: wavelength, then travel time
Question: A siren gives out sound of frequency 500 Hz with a wavelength of 0.69 m. (a) What is the speed of the sound? (b) How long does it take to reach a village 1.38 km away? Working: (a) v = λν = 0.69 × 500 = 345 m s⁻¹. (b) Distance = 1.38 km = 1380 m. Time = distance ÷ speed = 1380 ÷ 345 = 4 s. Check: 345 × 4 = 1380.
Speed in different media
Sound travels at a finite speed, much slower than light: we see a lightning flash before we hear the thunder. The speed depends on the properties of the medium and on its temperature. It is generally fastest in solids, slower in liquids and slowest in gases, and in any medium it increases as the temperature rises. According to the textbook, sound travels at 331 m s⁻¹ in air at 0 °C and at 344 m s⁻¹ at 22 °C.
| State | Medium | Speed (m s⁻¹) |
|---|---|---|
| Solid | Aluminium | 6420 |
| Solid | Iron | 5950 |
| Liquid | Water (distilled) | 1498 |
| Gas | Air | 346 |
Worked example 3: how far away is the storm?
Question: Gurleen hears thunder 5 s after she sees the lightning. Taking the speed of sound in air as 344 m s⁻¹ and treating the light as arriving at once, how far away was the lightning? Working: Distance = speed × time = 344 × 5 = 1720 m, about 1.7 km.
Key takeaways: pitch follows frequency, loudness follows amplitude, and quality follows the mixture of frequencies. Loudness is the ear's response to intensity. For any wave, v = λν. Sound is fastest in solids and slowest in gases, and speeds up as temperature rises.
Check your understanding
-
1. Which property of a sound wave decides its pitch?
- Amplitude
- Speed
- Intensity
- Frequency
Show answer
Answer: D. Pitch is the brain's interpretation of frequency: the higher the frequency, the higher the pitch. Amplitude decides loudness.
-
2. Find the wavelength of a sound of frequency 425 Hz travelling at 340 m s⁻¹.
- 0.8 m
- 1.25 m
- 144 500 m
- 85 m
Show answer
Answer: A. λ = v ÷ ν = 340 ÷ 425 = 0.8 m. Check: 0.8 × 425 = 340. 1.25 m comes from dividing the wrong way round.
-
3. You recognise your friend's voice in a dark room among others. Which characteristic helps?
- Loudness
- Quality (timbre)
- Pitch only
- Speed
Show answer
Answer: B. Quality or timbre lets us tell apart sounds even of the same pitch and loudness, because each voice has its own mix of frequencies.
-
4. In which medium does sound travel fastest at a given temperature?
- Air
- Water
- Iron
- Hydrogen gas
Show answer
Answer: C. Sound is generally fastest in solids, slower in liquids and slowest in gases. In the textbook's table iron (5950 m s⁻¹) is far faster than water (1498 m s⁻¹) or any gas.
-
5. A sound wave travels 1020 m in 3 s. If its frequency is 850 Hz, what is its wavelength?
- 0.4 m
- 2.5 m
- 0.3 m
- 1.2 m
Show answer
Answer: A. Speed v = 1020 ÷ 3 = 340 m s⁻¹. λ = v ÷ ν = 340 ÷ 850 = 0.4 m. Check: 0.4 × 850 = 340.
Sign in to keep track of the lessons you finish.