- Practice
- About 15 min
- 5 practice questions
Mixed timed sets and a trap log: putting the methods together
Run a mixed twenty-question set against the clock, work out seconds per question and per correct answer for each type, log each trap you fell into, and set next week's limits from the numbers.
If something looks wrong, please tell us.
Separate drills build separate skills. A mixed set tests whether they work together, with switching between types, a single clock, and the temptation to rush. This lesson shows how to run a mixed set, read the results by type, and keep a trap log that tells you what to train next. The numbers are an invented example; use your own.
Setting up the set
- Choose four types, for example percentages, simplification, number series and data questions, with 5 questions of each: 20 in all.
- Set the time limit from your drill pace, say 60 seconds a question: 20 x 60 = 1,200 seconds = 20 minutes.
- Shuffle the questions, or have a friend do it, so that types come in random order.
- Record the seconds used on each type roughly, by writing the clock time when you finish each question or group.
Reading the results
For each type, compute seconds per question (seconds used / attempted) and seconds per correct answer (seconds used / correct). The second figure combines speed and errors.
Worked example 1: Amrita's first mixed set
| Type | Attempted | Right | Seconds used | Sec / question | Sec / correct |
|---|---|---|---|---|---|
| Percentages | 5 | 5 | 280 | 56 | 56 |
| Simplification | 5 | 4 | 250 | 50 | 62.5 |
| Number series | 5 | 3 | 420 | 84 | 140 |
| Data questions | 5 | 4 | 480 | 96 | 120 |
| Total | 20 | 16 | 1,430 |
Total time was 280 + 250 + 420 + 480 = 1,430 seconds, which is 23.8 minutes. That is 230 seconds (1,430 - 1,200) over her 20-minute limit. The numbers show where the time went: number series cost 140 seconds per correct answer and data questions 120, against 56 for percentages and 62.5 for simplification. Even though she got 4 of 5 data questions right, they were slow.
The trap log
Alongside the numbers, Amrita notes each trap she fell into. In simplification, the one wrong answer came from reading 20 - (5 - 2) as 20 - 5 - 2. In number series, one wrong answer came from stopping at the first differences when the series needed second differences, and one from a series she could not crack after 3 minutes. In data questions, the one wrong answer came from reading the figure from the wrong column. Her trap log for the week: one bracket slip, one 'stopped too early' slip, one time sink and one wrong-column reading, which matches the 4 wrong answers in the table.
Worked example 2: setting next week's limits
Amrita sets two targets for the same mixed set next week: number series at 70 seconds a question (down from 84), data questions at 80 (down from 96), with percentages and simplification unchanged. New total = 280 + 250 + 5 x 70 + 5 x 80 = 280 + 250 + 350 + 400 = 1,280 seconds, about 21.3 minutes. That is still over 20 minutes, which she accepts as a stage on the ladder, not a failure. She adds a rule for series: run the scan for at most 40 seconds, then mark and move on. And she adds one line to her routine for simplification: circle the operation she is doing and write the bracket result on its own line.
Mixed set, then numbers by type, then the trap log. Set next week's limits from the types that cost the most seconds per correct answer.
Key takeaways
- A mixed set tests whether your methods work together under one clock.
- Compute seconds per question and per correct answer for each type.
- Keep a trap log: each wrong answer and time sink, and its cause.
- Set small, specific limits for next time, based on the expensive types.
Check your understanding
-
1. A mixed set has 4 types of 5 questions at 60 seconds a question. What is the time limit?
- 20 minutes
- 12 minutes
- 15 minutes
- 24 minutes
Show answer
Answer: A. 20 questions x 60 seconds = 1,200 seconds = 20 minutes.
-
2. A type used 420 seconds for 5 attempts, 3 of them right. What are the seconds per correct answer?
- 84
- 105
- 140
- 420
Show answer
Answer: C. 420 / 3 = 140. (420 / 5 = 84 is seconds per question.)
-
3. A set used 1,430 seconds against a limit of 1,200. How many seconds over was it?
- 130
- 230
- 200
- 330
Show answer
Answer: B. 1,430 - 1,200 = 230 seconds.
-
4. A student uses 56, 50, 84 and 96 seconds per question on four types with equal numbers of questions. Which type takes the most time per question?
- The first, at 56 seconds
- The second, at 50 seconds
- The third, at 84 seconds
- The fourth, at 96 seconds
Show answer
Answer: D. The largest value is 96 seconds, the fourth type.
-
5. What does the trap log add to the numbers?
- The score of the best student in a group
- The cause of each wrong answer or time sink
- The marks carried by each question set
- A list of the questions to skip next time
Show answer
Answer: B. The numbers show where time and marks went; the trap log records why, so the fix can be specific.
Sign in to keep track of the lessons you finish.