- Practice
- About 14 min
- 5 practice questions
Reading faster with a purpose and cutting copying errors
Read passages and data tables with a clear purpose so you find what is asked sooner, and stop the copying errors that turn correct methods into wrong answers.
If something looks wrong, please tell us.
Reading speed is rarely about moving your eyes faster. It is about knowing what you are looking for, so you do not read the same material twice. And once you have found the numbers, they must reach your rough sheet unchanged: a swapped digit or a missed zero wastes every second spent on the method. This lesson covers both halves: purposeful reading and clean copying.
Reading with a purpose
- Passages: first skim the opening lines of each paragraph to see how the passage is organised; then look at what the questions ask; then read closely only the parts that answer them.
- Data tables and charts: read the title, the units (thousands, lakhs, per cent) and the row and column headings before any number.
- Long word problems: read the last sentence first to see what is asked, then read the whole problem once, carefully.
- Try both the order above and your usual order in practice, and keep whichever gives you better accuracy in less time.
Worked example 1: Sana and a passage
Sana, a Hindi-medium student building her English reading in Ranchi, used to read each 400-word practice passage twice in full before answering: about 4 minutes per reading, so 8 minutes. She tried a purposeful order instead.
| Step | Old way | Purposeful way |
|---|---|---|
| First reading | 4 min (full) | 1.5 min (skim openings) |
| Questions | Read after both readings | 1 min (read all questions) |
| Second reading | 4 min (full) | 3 min (close reading of relevant parts) |
| Total | 8 min | 5.5 min |
She saves 8 - 5.5 = 2.5 minutes per passage. Over three weeks her accuracy on these sets stayed the same, so she kept the new order. If it had dropped, she would have gone back.
Copying errors
| Error | Example | Fix |
|---|---|---|
| Swapped digits | 63 written as 36 | Point at each digit as you copy it |
| Look-alike digits | 1 and 7, 4 and 9, 0 and 6 confused in your own handwriting | Write digits in a fixed, clear style; cross your 7 |
| Dropped zeros | 45 thousand written as 45 | Copy the units next to the number |
| Wrong row or column | Taking the 2019 figure instead of 2020 | Use a ruler or pen edge along the row |
| Moved decimal | 2.45 written as 24.5 | Read the number aloud in your head before writing |
Worked example 2: Mohit and a table
Mohit, preparing in Jaipur, is asked how much a figure in a table rose from 6,948 to 7,368. He copied 7,368 as 7,638 and got 7,638 - 6,948 = 690, which was not among the options. He spent two more minutes rechecking his subtraction before noticing the swap. The correct rise is 7,368 - 6,948 = 420. The table also said "in thousand units", so the actual rise is 420 thousand, or 4,20,000 units. Had the question asked for the rise in units, missing the heading would have cost him again.
Mohit's new routine: point at each digit while copying, write the unit beside the first number from any table, and when an answer matches no option, check the copied numbers before the arithmetic.
Know what you are looking for before you read, and copy every number with its unit, digit by digit.
Key takeaways
- Purposeful reading means knowing what you need before you read closely.
- For tables, read title, units and headings first.
- Most copying errors are swaps, look-alike digits, dropped zeros, wrong rows and moved decimals.
- When an answer matches no option, recheck the copied numbers first.
Check your understanding
-
1. What should you read first in a data table?
- Title, units and headings
- The largest number in the table
- The last row only
- The options of the first question
Show answer
Answer: A. Title, units and headings tell you what each number means; reading numbers first invites unit and row errors.
-
2. Ritu used to read a passage twice at 5 minutes each. Now she skims for 2 minutes, reads the questions in 1 minute and reads closely for 4 minutes. How much time does she save?
- 2 minutes
- 4 minutes
- 3 minutes
- 5 minutes
Show answer
Answer: C. Old: 5 + 5 = 10 minutes. New: 2 + 1 + 4 = 7 minutes. Saving = 10 - 7 = 3 minutes.
-
3. A table heading says "figures in lakh rupees" and a cell reads 2.4. What amount is that?
- Rs 2,40,000
- Rs 2,400
- Rs 24,000
- Rs 24,00,000
Show answer
Answer: A. One lakh is 1,00,000, so 2.4 lakh = 2.4 x 1,00,000 = Rs 2,40,000.
-
4. A value rose from 5,276 to 5,762. A student copied 5,762 as 5,726. What is the correct rise?
- 450
- 496
- 486
- 514
Show answer
Answer: C. 5,762 - 5,276 = 486. The miscopied figure would give 5,726 - 5,276 = 450.
-
5. Your answer matches none of the four options. What should you check first?
- Whether the question has an error
- Your handwriting style for the next paper
- Whether a different question type is easier
- Whether you copied the numbers from the question correctly
Show answer
Answer: D. A missing match is often a copying error; checking the copied numbers is quick and finds it before you redo all the arithmetic.
Sign in to keep track of the lessons you finish.