• Practice
  • About 14 min
  • 5 practice questions

Speed drills: from untimed practice to a gradually tighter clock

Run a drill ladder for one question type: untimed until accurate, then a comfortable clock, then small, rule-based cuts in time, stepping back when accuracy falls.

If something looks wrong, please tell us.

The Foundation course showed how to run a single timed set. Real improvement comes from a sequence of sets that gets steadily harder in a controlled way. This lesson gives you that sequence, a drill ladder, and the rules for climbing it and stepping down. Followed patiently, it turns a question type that takes you two minutes into one you can finish in about a minute, without the accuracy collapse that comes from rushing.

The drill ladder

Climb one stage at a time; step back one stage if a set falls below the line
StageWhat you doMove up when
1. LearnUntimed sets of 10; check every answer and the methodTwo sets in a row at or above your accuracy line (say 80%)
2. Comfortable clockTime limit = your untimed pace per questionTwo sets in a row at or above the line
3. TightenCut 10 seconds per question at each stepTwo sets in a row at or above the line
4. Fine stepsNear your limit, cut 5 seconds instead of 10Two sets in a row at or above the line
5. MixMixed sets of this type with others, at the same paceKeep for maintenance

Two rules run the whole ladder. Move up only after two sets in a row at or above your accuracy line, so one lucky set does not push you too far. Step back to the previous time as soon as one set falls below the line, and stay there for a few sets before trying again.

Worked example 1: Nisha climbs the ladder on percentages

Nisha, a final-year B.A. student in Lucknow, sets her accuracy line at 80%. Her untimed set of 10 percentage questions took 15 minutes with 9 right: 15 x 60 / 10 = 90 seconds per question and 90% accuracy. That becomes her comfortable clock.

Nisha's drill log
SetSeconds per questionLimit for 10 questionsCorrectDecision
190900 s = 15 min9 (90%)One set at or above 80%
29015 min10 (100%)Two in a row: tighten
380800 s = 13 min 20 s9 (90%)One set at or above 80%
48013 min 20 s8 (80%)Two in a row: tighten
570700 s = 11 min 40 s6 (60%)Below 80%: step back to 80 s
68013 min 20 s9 (90%)Stay here for a few sets

In five sets she moved from 90 to 80 seconds per question, an 11% cut, with accuracy intact. Set 5 showed that 70 seconds is beyond her for now, which is useful information, not a failure.

Worked example 2: Kunal uses a smaller step

Kunal, who works in a bank branch and drills at night, had been steady at 70 seconds per question on sets of 12 number-series questions: 12 x 70 = 840 seconds = 14 minutes, and his last two sets gave 11 of 12 right (91.7%). He jumped to 60 seconds, a 12-minute limit, and got only 7 right: 7 / 12 = 58.3%.

  1. He steps back to 70 seconds (14 minutes) for three sets to make his accuracy steady again.
  2. Near his limit he moves to the fine-step stage: 65 seconds, so 12 x 65 = 780 seconds = 13 minutes.
  3. If 65 seconds holds for two sets, he then tries 60 again.

Making drills work

  • Drill one question type at a time on the ladder; mixing comes at the last stage.
  • Keep drills short, 15 to 20 minutes, and do them most days rather than one long session a week.
  • Use fresh questions. Repeating the same set measures memory, not speed.
  • After every set, look at each wrong answer and note its cause before the next set.

Move up after two good sets in a row; step back after one bad one. Small steps near your limit.

Key takeaways

  • Untimed accuracy first, then a comfortable clock, then small cuts in time.
  • Two sets in a row at or above the line to move up; one set below to step back.
  • Near your limit, cut 5 seconds per question instead of 10.
  • A failed step tells you where your current limit is.

Check your understanding

  1. 1. Your untimed set of 10 questions took 12 minutes with 9 right. What is your comfortable clock per question?

    1. 60 seconds
    2. 72 seconds
    3. 80 seconds
    4. 120 seconds
    Show answer

    Answer: B. 12 x 60 = 720 seconds; 720 / 10 = 72 seconds per question.

  2. 2. On the ladder, when do you move up to a tighter limit?

    1. After two sets in a row at or above your accuracy line
    2. After any single set above the line
    3. After every set, whatever the result
    4. Only when you get every question right
    Show answer

    Answer: A. Two good sets in a row show the pace is steady, so one lucky set does not push you too far.

  3. 3. At 75 seconds per question, what is the time limit for a set of 16 questions?

    1. 18 minutes
    2. 16 minutes
    3. 20 minutes
    4. 25 minutes
    Show answer

    Answer: C. 16 x 75 = 1,200 seconds = 20 minutes.

  4. 4. Your line is 80%. At a new, tighter limit you get 9 of 12 right. What do you do?

    1. Tighten again because you finished the set
    2. Step back to the previous limit for a few sets
    3. Hold this limit and ignore the result
    4. Give up the question type
    Show answer

    Answer: B. 9 / 12 = 75%, below 80%, so you step back to the last limit that worked and steady yourself there.

  5. 5. Why should drill sets use fresh questions rather than the same set again?

    1. Fresh questions are always easier
    2. Repeated sets are not allowed to be timed
    3. Fresh questions make accuracy irrelevant
    4. Repeating a set measures memory of the answers, not speed
    Show answer

    Answer: D. If you remember the answers, the time tells you nothing about your solving speed.

Privacy · Terms · Refunds · Delivery