- Practice
- About 15 min
- 5 practice questions
Alloys, amalgams and corrosion
Explain what alloys and amalgams are, why and how metals are alloyed, name common ferrous and non-ferrous alloys and their uses, and describe rusting, the types of corrosion and how to prevent it.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define an alloy and an amalgam, and describe an alloy as a solid solution.
- Give the reasons for alloying and two ways of making alloys.
- Classify alloys as ferrous or non-ferrous with examples and uses.
- Explain rusting, dry and wet corrosion, and the main methods of prevention.
Pure metals are often not quite right for the job. Pure gold is too soft for jewellery; pure iron rusts and is not very strong. Mixing metals, or adding a little non-metal, can produce a material with much better properties. Protecting metals from slowly being eaten away by air and water is just as important.
Alloys
An alloy is a homogeneous mixture of two or more metals, or of a metal with a non-metal such as carbon. Its properties are often quite different from those of its parts. Gold for ornaments is mixed with a little copper to make it harder and stronger. An alloy can be seen as a solid solution: the metal present in the larger amount is the solvent and the others are solutes. In brass, copper is the solvent and zinc the solute.
An amalgam is an alloy of mercury with another metal. A silver-tin amalgam has been used for filling teeth.
- Reasons for alloying: to change appearance and colour; to change chemical activity (for example, to resist corrosion); to lower the melting point; to increase hardness and tensile strength; to increase electrical resistance.
- Making alloys: (a) by melting the metals together, as brass is made from copper and zinc; (b) by compressing finely powdered metals together. Wood's metal, a low-melting (fusible) alloy of lead, tin, bismuth and cadmium, is given as an example in the textbook.
Types of alloys
-
Ferrous (iron is the main metal)
- Stainless steel (Fe, C, Ni, Cr): utensils, cutlery, vehicle parts
- Nickel steel (Fe, C, Ni): cables, aircraft parts, propellers
-
Non-ferrous: copper alloys
- Brass (Cu, Zn): electrical fittings, medals, decorative items
- Bronze (Cu, Sn): statues, coins, bells, gongs
-
Non-ferrous: aluminium alloys
- Duralumin (Al, Mg, Mn, Cu): aircraft, tools, pressure cookers
- Magnalium (Al, Mg): aircraft, scientific instruments
Worked example 1: picking an alloy
Question: Which alloy suits (a) a kitchen knife that should not rust, and (b) the body of a light aircraft? Give the reason.
Working: (a) Stainless steel: chromium and nickel in it stop the iron from rusting, so it stays bright in contact with water and food. (b) Duralumin (or magnalium): aluminium alloys are light, yet the added metals make them much stronger than pure aluminium.
Corrosion and rusting
Corrosion is the slow destruction of a metal by chemical or electrochemical reaction with its surroundings. It turns the metal back into an oxide, hydroxide or sulphide, so it loses its metallic properties. The corrosion of iron is called rusting. Rust is reddish-brown hydrated ferric oxide, Fe₂O₃·xH₂O. Both oxygen and water are needed; salt in the water speeds it up.
Two types of corrosion
-
Dry (chemical) corrosion
- No moisture involved
- Direct attack by gases such as O₂, SO₂, H₂S
- Happens mainly at high temperature
- Oxygen is the most active
-
Wet (electrochemical) corrosion
- Moisture is present
- Metal reacts with water or salt, acid or base solutions
- Tiny cells form on the surface
- Rusting of iron in moist air
Preventing corrosion
- Alloying: for example, stainless steel resists rusting.
- Galvanisation: coating iron with zinc. Zinc corrodes in preference to iron, so the iron is protected even if the coat is scratched.
- Electroplating: using electric current to coat one metal with another, such as chromium on taps.
- Anodising: an electrochemical process that thickens the natural oxide layer on aluminium, making it durable, decorative and corrosion-resistant.
- Cathodic (sacrificial) protection: a more easily corroded metal such as zinc or magnesium is connected to the iron object. It acts as the anode and corrodes instead of the iron.
Worked example 2: explaining a protection method
Question: A ship's steel hull has blocks of zinc attached below the waterline. Explain how this protects the hull.
Working: Zinc is more reactive than iron. In sea water the zinc becomes the anode and loses electrons (corrodes), while the steel hull acts as the cathode and is not oxidised. The zinc blocks are 'sacrificed' and replaced from time to time. This is cathodic protection.
The textbook takes the historic Pamban railway bridge, opened in 1914 and linking Rameswaram on Pamban Island to the mainland, as an example of a structure in salty sea air that needs regular protective coating to control corrosion.
Rust = Fe₂O₃·xH₂O and needs both oxygen and water. Keep them out (paint, oil, plating), or let a more reactive metal corrode instead (galvanising, sacrificial protection).
Key takeaways: an alloy is a homogeneous mixture of metals (or a metal and a non-metal); an amalgam contains mercury. Alloys can be ferrous or non-ferrous and are chosen for strength, lightness or resistance to corrosion. Corrosion may be dry or wet; it is prevented by alloying, coatings such as zinc, chromium or anodised oxide, and sacrificial protection.
Check your understanding
-
1. An amalgam is an alloy that always contains:
- Iron
- Copper
- Mercury
- Aluminium
Show answer
Answer: C. By definition an amalgam is an alloy of mercury with another metal, such as the silver-tin amalgam used in dental fillings.
-
2. Which alloy is non-ferrous?
- Bronze
- Stainless steel
- Nickel steel
- Cast iron
Show answer
Answer: A. Bronze is copper and tin, with no iron as its main metal. Stainless steel, nickel steel and cast iron are all mainly iron.
-
3. What is the chemical name of rust?
- Anhydrous ferrous oxide
- Iron sulphide
- Basic copper carbonate
- Hydrated ferric oxide, Fe₂O₃·xH₂O
Show answer
Answer: D. Rust is hydrated iron(III) oxide, Fe₂O₃·xH₂O. Basic copper carbonate is the green coat on copper.
-
4. Galvanised iron does not rust quickly even where the zinc coat is scratched. Why?
- Zinc is less reactive than iron
- Zinc is more reactive and corrodes in preference to iron
- Zinc makes iron magnetic
- Zinc removes oxygen from the air permanently
Show answer
Answer: B. Zinc is more reactive than iron, so where both are exposed the zinc is oxidised first and the iron is protected, just as in sacrificial protection.
-
5. In brass, considered as a solid solution, which metal is the solvent?
- Zinc
- Tin
- Copper
- Nickel
Show answer
Answer: C. The metal present in the larger amount is the solvent. Brass is mostly copper, with zinc dissolved in it as the solute.
Sign in to keep track of the lessons you finish.