Revision notes

Unit 8 Periodic Classification of Elements: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Modern periodic law, periods and groups

Modern periodic law: the physical and chemical properties of the elements are periodic functions of their atomic numbers.

The seven periods
PeriodAtomic numbersNumber of elementsType
11-2 (H to He)2Shortest period
23-10 (Li to Ne)8Short period
311-18 (Na to Ar)8Short period
419-36 (K to Kr)18Long period: 8 representative + 10 transition
537-54 (Rb to Xe)18Long period: 8 representative + 10 transition
655-86 (Cs to Rn)32Longest: 8 representative + 10 transition + 14 lanthanides
787-118 (Fr to Og)32Also 32, including 14 actinides

Families of the modern periodic table

  • Group 1: alkali metals
    • One valence electron, valency 1
    • Li, Na, K
  • Group 2: alkaline earth metals
    • Two valence electrons
    • Mg, Ca
  • Groups 3-12: transition metals
    • Lanthanides and actinides (inner transition) belong to group 3
  • Groups 13-16
    • 13 boron family
    • 14 carbon family
    • 15 nitrogen family
    • 16 oxygen family (chalcogens)
  • Group 17: halogens
    • Seven valence electrons
    • F, Cl, Br, I
  • Group 18: noble gases
    • Filled outer shell
    • He, Ne, Ar

Key takeaways: the modern table orders elements by atomic number, which removes Mendeleev's anomalies. There are 7 periods (2, 8, 8, 18, 18, 32, 32 elements) and 18 groups. Same group means same valence electrons, same valency and similar chemistry; group 18 is unreactive.

Read the full lesson

Lesson 2

Periodic trends: size, ionisation energy, electron affinity and electronegativity

Electronegativity difference = 1.7: bond about 50% ionic and 50% covalent. Less than 1.7: mainly covalent. More than 1.7: mainly ionic.

Summary of periodic trends
PropertyAcross a period (left to right)Down a group
Atomic radiusDecreasesIncreases
Ionic radiusDecreasesIncreases
Ionisation energyIncreasesDecreases
Electron affinityIncreasesDecreases
ElectronegativityIncreasesDecreases

Why the trends go the way they do

  • Across a period
    • Same number of shells
    • Nuclear charge rises
    • Outer electrons pulled closer
    • Size falls; IE, EA, EN rise
  • Down a group
    • One more shell each step
    • Outer electrons farther away
    • Held less tightly
    • Size rises; IE, EA, EN fall

Key takeaways: size goes down across a period and up down a group; ionisation energy, electron affinity and electronegativity do the opposite. Cations are smaller than their atoms; anions are larger. An electronegativity difference above 1.7 means a mainly ionic bond, below 1.7 a mainly covalent one.

Read the full lesson

Lesson 3

Metallurgy basics: ores, concentration and properties of metals

Three main steps of metallurgy

  1. Concentration of the ore Remove the unwanted rocky impurities
  2. Production of the metal Convert the concentrated ore into the metal, e.g. by reduction
  3. Refining Purify the crude metal
TermMeaning
MineralA naturally occurring compound or mixture of compounds of a metal in the Earth
OreA mineral from which the metal can be extracted easily and profitably on a large scale
MiningTaking the ore out of the Earth's crust
Gangue (matrix)The rocky impurity that comes with the ore
FluxA substance added to remove gangue and lower the fusion temperature; basic flux (CaO) for acidic gangue, acidic flux (SiO₂) for basic gangue
SlagThe fusible product of flux + gangue, removed as waste
SmeltingReducing the roasted oxide to molten metal, with impurities removed as slag
Kinds of ores (examples from the textbook)
Oxide oresCarbonate oresHalide oresSulphide ores
Bauxite, Al₂O₃·2H₂OMarble, CaCO₃Cryolite, Na₃AlF₆Galena, PbS
Cuprite, Cu₂OMagnesite, MgCO₃Fluorspar, CaF₂Iron pyrite, FeS₂
Haematite, Fe₂O₃Siderite, FeCO₃Rock salt, NaClZinc blende, ZnS

Methods of concentration

  • Hydraulic (gravity) separation
    • Principle: ore and gangue differ in density
    • Used when the ore is heavier
    • Water washes light gangue off a vibrating sloping table
    • Oxide ores, e.g. haematite
  • Magnetic separation
    • Principle: ore or gangue is magnetic
    • Magnetic roller on a conveyor pulls magnetic particles aside
    • e.g. tinstone, SnO₂
  • Froth floatation
    • Principle: ore is wetted by pine oil, gangue by water
    • Used when gangue is heavier
    • Air blown in; ore rises with the froth
    • Sulphide ores, e.g. zinc blende
  • Leaching (chemical method)
    • Ore dissolves in a reagent; impurities do not
    • Filter, then precipitate the ore back
    • e.g. bauxite
Physical properties and the usual exceptions
PropertyUsual behaviourExceptions
StateSolid at room temperatureMercury is liquid; gallium melts just above room temperature
LustreShiny (metallic lustre)-
HardnessHard and strongSodium and potassium are soft enough to cut with a knife
Melting and boiling pointsHighGallium, mercury, sodium, potassium are low
DensityHighSodium and potassium float on water
Ductility and malleabilityDrawn into wires, beaten into sheetsZinc and mercury are not malleable at room temperature
ConductionGood conductors of heat and electricitySilver and copper are the best

Key takeaways: metallurgy = concentrate, extract, refine. An ore is a mineral that pays to process. Flux + gangue → slag. Choose gravity separation for heavy ores, magnetic separation for magnetic ones, froth floatation for sulphide ores, and leaching when the ore dissolves in a reagent. The more reactive the metal, the stronger the method needed to free it.

Read the full lesson

Lesson 4

Extraction of aluminium, copper and iron

Aluminium: key reactions
WithEquationNote
Air, strongly heated (about 800 °C)4Al + 3O₂ → 2Al₂O₃; 2Al + N₂ → 2AlNBurns brightly; dry air at room temperature has no effect
Steam over red-hot metal2Al + 3H₂O → Al₂O₃ + 3H₂Cold water does not react because of the oxide layer
Dilute hydrochloric acid2Al + 6HCl → 2AlCl₃ + 3H₂Hydrogen given off
Iron oxide (thermite)Fe₂O₃ + 2Al → 2Fe + Al₂O₃ + heatAluminothermic process: Al is a strong reducing agent

Extracting copper from copper pyrites

  1. Concentration Crushed ore concentrated by froth floatation
  2. Roasting Heated in excess air: 2CuFeS₂ + O₂ → Cu₂S + 2FeS + SO₂
  3. Smelting With coke and sand in a blast furnace: gives matte (Cu₂S + FeS) and slag
  4. Bessemerisation FeS → FeO, removed as FeSiO₃ slag; 2Cu₂O + Cu₂S → 6Cu + SO₂ gives blister copper
  5. Electrolytic refining Impure copper anode, pure copper cathode, acidified CuSO₄ electrolyte
Zones of the blast furnace (temperatures as given in the textbook)
ZoneTemperatureMain reactions
Lower: combustion zoneabout 1500 °CC + O₂ → CO₂ + heat (exothermic)
Middle: fusion zoneabout 1000 °CCO₂ + C → 2CO; CaCO₃ → CaO + CO₂ (both absorb heat); CaO + SiO₂ → CaSiO₃ (slag)
Upper: reduction zoneabout 400 °CFe₂O₃ + 3CO → 2Fe + 3CO₂
Types of iron (carbon ranges as given in the textbook)
TypeCarbon contentUses
Pig iron2.0-4.5%Pipes, stoves, radiators, railings, manhole covers
Steel0.25-2.0%Buildings, machinery, cables, towers, alloys
Wrought ironless than 0.25%Springs, anchors, electromagnets

Key takeaways: aluminium is made by Baeyer's process then electrolysis (Hall's process); copper by froth floatation, roasting, smelting, Bessemerisation and electrolytic refining; iron by reducing haematite with carbon monoxide in a blast furnace, with limestone removing silica as slag. Always check equations atom by atom.

Read the full lesson

Lesson 5

Alloys, amalgams and corrosion

Types of alloys

  • Ferrous (iron is the main metal)
    • Stainless steel (Fe, C, Ni, Cr): utensils, cutlery, vehicle parts
    • Nickel steel (Fe, C, Ni): cables, aircraft parts, propellers
  • Non-ferrous: copper alloys
    • Brass (Cu, Zn): electrical fittings, medals, decorative items
    • Bronze (Cu, Sn): statues, coins, bells, gongs
  • Non-ferrous: aluminium alloys
    • Duralumin (Al, Mg, Mn, Cu): aircraft, tools, pressure cookers
    • Magnalium (Al, Mg): aircraft, scientific instruments

Two types of corrosion

  • Dry (chemical) corrosion
    • No moisture involved
    • Direct attack by gases such as O₂, SO₂, H₂S
    • Happens mainly at high temperature
    • Oxygen is the most active
  • Wet (electrochemical) corrosion
    • Moisture is present
    • Metal reacts with water or salt, acid or base solutions
    • Tiny cells form on the surface
    • Rusting of iron in moist air

Rust = Fe₂O₃·xH₂O and needs both oxygen and water. Keep them out (paint, oil, plating), or let a more reactive metal corrode instead (galvanising, sacrificial protection).

Key takeaways: an alloy is a homogeneous mixture of metals (or a metal and a non-metal); an amalgam contains mercury. Alloys can be ferrous or non-ferrous and are chosen for strength, lightness or resistance to corrosion. Corrosion may be dry or wet; it is prevented by alloying, coatings such as zinc, chromium or anodised oxide, and sacrificial protection.

Read the full lesson

Privacy · Terms · Refunds · Delivery