• Practice
  • About 15 min
  • 5 practice questions

Factors affecting solubility

Explain how the nature of solute and solvent, temperature and pressure affect solubility, state Henry's law, and calculate how much solid crystallises when a saturated solution is cooled.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Use 'like dissolves like' to predict whether a substance will dissolve.
  • Describe how temperature affects the solubility of solids and of gases.
  • Explain the effect of pressure on gases dissolving in liquids, using Henry's law.
  • Calculate the mass of crystals formed when a saturated solution is cooled.

Why does sugar dissolve faster in hot tea, why does a soft-drink bottle fizz when opened, and why do fish need cool water? All three are explained by the three main factors that control solubility: the nature of the solute and solvent, temperature and pressure.

1. Nature of solute and solvent

Chemists sum this up as 'like dissolves like'. Polar or ionic substances, such as common salt, dissolve readily in polar solvents such as water. Non-polar substances, such as fat or wax, dissolve in non-polar solvents such as ether or petrol. A non-polar substance does not dissolve in a polar solvent, and the reverse is also true. This is why water alone cannot remove an oily stain, but a non-polar solvent can.

2. Temperature

Effect of raising the temperature

  • Solid in liquid
    • Solubility usually increases
    • More sugar dissolves in warm water
    • True when dissolving absorbs heat (endothermic)
    • If dissolving gives out heat (exothermic), solubility falls
  • Gas in liquid
    • Solubility decreases
    • Bubbles appear when water is heated: dissolved air escapes
    • Cold water holds more dissolved oxygen
    • So cold waters support more aquatic life

3. Pressure

Pressure has a noticeable effect only on gases dissolving in liquids. Increasing the pressure of a gas above a liquid pushes more of it into solution. Soft drinks are bottled under high pressure of carbon dioxide; when you open the bottle the pressure drops, the gas becomes less soluble and bubbles out. Household ammonia solution and formalin (formaldehyde in water) are other solutions of gases in liquids.

Henry's law: at a fixed temperature, the solubility of a gas in a liquid is directly proportional to the pressure of the gas above the solution.

Worked example 1: applying Henry's law

Question (made-up data): At a certain temperature, 1.5 g of a gas dissolves in 1 litre of water when the gas pressure is 1 atm. How much dissolves at 4 atm, at the same temperature?

Working: Solubility is proportional to pressure. The pressure is 4 times larger, so the solubility is 4 times larger: 1.5 × 4 = 6 g per litre.

Crystals from cooling a saturated solution

For most solids, a hot saturated solution holds more solute than a cold one. When it cools, the extra solute cannot stay dissolved and separates as crystals. This is how crystallisation is used to purify salts.

How much crystallises on cooling?

  1. Mass dissolved at the higher temperature Solubility (hot) × mass of water ÷ 100
  2. Mass that can stay dissolved at the lower temperature Solubility (cold) × mass of water ÷ 100
  3. Subtract The difference comes out as crystals

Worked example 2: crystals on cooling

Question (made-up data): The solubility of salt Y is 80 g at 60 °C and 30 g at 20 °C. A saturated solution containing 40 g of water at 60 °C is cooled to 20 °C. What mass of Y crystallises?

Working: At 60 °C, 40 g of water holds 80 × 40 ÷ 100 = 32 g. At 20 °C it can hold only 30 × 40 ÷ 100 = 12 g. Crystals formed = 32 − 12 = 20 g.

Worked example 3: predicting with 'like dissolves like'

Question: Will iodine (a non-polar solid) dissolve better in water or in carbon tetrachloride?

Working: Iodine is non-polar, carbon tetrachloride is non-polar, and water is polar. Like dissolves like, so iodine dissolves much better in carbon tetrachloride.

Key takeaways: like dissolves like. Raising the temperature usually increases the solubility of solids but always decreases that of gases. Raising pressure increases the solubility of a gas in a liquid in direct proportion (Henry's law). When a hot saturated solution cools, the difference in solubility comes out as crystals.

Check your understanding

  1. 1. Why do bubbles form in water long before it boils?

    1. Water starts to decompose
    2. Dissolved air becomes less soluble as the water warms
    3. Pressure on the water increases
    4. Salt in the water melts
    Show answer

    Answer: B. Gases are less soluble in warmer water, so the air dissolved in the water comes out as small bubbles as it is heated.

  2. 2. Grease on a shirt is best removed by:

    1. Cold water
    2. Hot water alone
    3. Salt water
    4. A non-polar solvent such as petrol
    Show answer

    Answer: D. Grease is non-polar and dissolves in a non-polar solvent (like dissolves like). Water is polar and does not dissolve grease.

  3. 3. A gas has a solubility of 0.8 g per litre of water at 2 atm. At the same temperature, what is its solubility at 5 atm?

    1. 0.32 g per litre
    2. 1.6 g per litre
    3. 2 g per litre
    4. 4 g per litre
    Show answer

    Answer: C. By Henry's law, solubility ∝ pressure. 0.8 × (5 ÷ 2) = 0.8 × 2.5 = 2 g per litre.

  4. 4. The solubility of a salt is 60 g at 70 °C and 25 g at 10 °C. A saturated solution with 50 g of water at 70 °C is cooled to 10 °C. How much salt crystallises?

    1. 17.5 g
    2. 35 g
    3. 30 g
    4. 12.5 g
    Show answer

    Answer: A. At 70 °C, 50 g of water holds 60 × 50 ÷ 100 = 30 g. At 10 °C it holds 25 × 50 ÷ 100 = 12.5 g. Crystals = 30 − 12.5 = 17.5 g.

  5. 5. Pressure has a large effect on the solubility of:

    1. Sugar in water
    2. Salt in water
    3. Carbon dioxide in water
    4. Copper in gold
    Show answer

    Answer: C. Pressure noticeably affects only gases dissolving in liquids. That is why carbon dioxide is packed into soft drinks under pressure.

Privacy · Terms · Refunds · Delivery