• Practice
  • About 15 min
  • 5 practice questions

Hydrated salts, hygroscopic and deliquescent substances

Explain hydration and water of crystallisation, describe what happens when blue vitriol and Epsom salt are heated, calculate the water in a hydrated salt, and tell hygroscopic from deliquescent substances.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define hydration, water of crystallisation and hydrated salt.
  • Name common hydrated salts with their formulas.
  • Describe the reversible change when copper sulphate crystals are heated and then wetted.
  • Tell hygroscopic and deliquescent substances apart, with examples.

Blue copper sulphate crystals look dry, yet they contain water locked inside them. Heat them and they crumble into a white powder; add water and they turn blue again. This lesson explains that water, and two other ways in which substances take water from the air.

Hydration and water of crystallisation

When some ionic substances form a saturated solution in water, their ions attract water molecules, which become attached in a fixed ratio. This is hydration. When the salt crystallises, it carries a definite number of water molecules into each formula unit of the crystal. That number is the water of crystallisation, and the salt is a hydrated salt. On heating, a hydrated salt loses this water and becomes anhydrous: it may lose its colour or its crystal shape and turn powdery (amorphous).

Common hydrated salts
Common nameChemical nameFormulaWater of crystallisation
Blue vitriolCopper(II) sulphate pentahydrateCuSO₄·5H₂O5
Epsom saltMagnesium sulphate heptahydrateMgSO₄·7H₂O7
GypsumCalcium sulphate dihydrateCaSO₄·2H₂O2
Green vitriolIron(II) sulphate heptahydrateFeSO₄·7H₂O7
White vitriolZinc sulphate heptahydrateZnSO₄·7H₂O7

Blue vitriol: a reversible change

When blue copper sulphate crystals are gently heated in a dry test tube (a teacher-guided demonstration, with the tube pointed away from people), drops of water collect on the cooler part of the tube and the crystals turn into a white (colourless) anhydrous powder. When the powder cools and a few drops of water are added, it turns blue again, and the tube feels warm.

CuSO₄·5H₂O (blue) ⇌ CuSO₄ (white) + 5H₂O. Heating drives the change forward; adding water reverses it. Check: Cu 1 = 1, S 1 = 1, O 4 + 5 = 4 + 5, H 10 = 10.

The copper sulphate cycle

  1. Blue crystals, CuSO₄·5H₂O
  2. Heat gently: water is driven off
  3. White anhydrous CuSO₄
  4. Add water: hydrated again, turns blue

Then back to step 1: Blue crystals, CuSO₄·5H₂O

Epsom salt behaves similarly: MgSO₄·7H₂O ⇌ MgSO₄ + 7H₂O. Gentle heating removes its seven water molecules; adding water reforms the hydrated salt. Because white anhydrous copper sulphate turns blue with water, it is used as a simple test for water.

Worked example 1: percentage of water in blue vitriol

Question: Find the percentage by mass of water in CuSO₄·5H₂O (Cu = 63.5, S = 32, O = 16, H = 1).

Working: CuSO₄ = 63.5 + 32 + 4 × 16 = 159.5. 5H₂O = 5 × 18 = 90. Formula mass = 159.5 + 90 = 249.5. % water = (90 ÷ 249.5) × 100 = 36.07%. So more than a third of the mass of the blue crystals is water.

Worked example 2: mass lost on heating

Question: About what mass of water is lost when 49.9 g of blue vitriol is fully dehydrated?

Working: 49.9 ÷ 249.5 = 0.2 mol of the hydrate. Each mole loses 5 mol of water, so 0.2 × 5 = 1 mol of water = 18 g. The anhydrous salt left weighs 49.9 − 18 = 31.9 g.

Hygroscopic substances

Some substances absorb moisture from the air at ordinary temperature without changing their physical state. They are hygroscopic, and the property is hygroscopy. They are used as drying agents. Examples: concentrated sulphuric acid, phosphorus pentoxide (P₂O₅), quicklime (CaO) and silica gel (SiO₂), the small packets found in new shoe boxes and medicine bottles.

Deliquescent substances

Some substances are so strongly hygroscopic that they absorb enough water from the air to dissolve completely, losing their crystal shape and forming a saturated solution. They are deliquescent, and the property is deliquescence. Examples: caustic soda (NaOH), caustic potash (KOH) and ferric chloride (FeCl₃). Deliquescence is greatest when the air is humid and the temperature is low. This is why sodium hydroxide pellets must be kept in tightly closed bottles.

Hygroscopic versus deliquescent

  • Hygroscopic
    • Absorbs moisture but does not dissolve
    • Physical state does not change
    • May be an amorphous solid or a liquid
    • Conc. H₂SO₄, P₂O₅, CaO, silica gel
  • Deliquescent
    • Absorbs moisture and dissolves in it
    • Physical state changes: solid becomes solution
    • Crystalline solids
    • NaOH, KOH, FeCl₃

Key takeaways: hydrated salts hold a fixed number of water molecules (water of crystallisation), shown after a dot in the formula. Heating removes it, often changing the colour; adding water restores it. Hygroscopic substances absorb moisture without dissolving and are used as drying agents; deliquescent substances absorb so much that they dissolve.

Check your understanding

  1. 1. What is the water of crystallisation of Epsom salt?

    1. 2
    2. 5
    3. 10
    4. 7
    Show answer

    Answer: D. Epsom salt is MgSO₄·7H₂O, magnesium sulphate heptahydrate, so each formula unit holds 7 water molecules.

  2. 2. Blue copper sulphate crystals are gently heated. What is observed?

    1. They turn white and water drops form
    2. They turn green and give off oxygen
    3. They melt into a blue liquid
    4. Nothing changes
    Show answer

    Answer: A. Heating drives off the five water molecules: CuSO₄·5H₂O → CuSO₄ + 5H₂O. The anhydrous salt is white, and the water condenses on the cooler part of the tube.

  3. 3. Which substance is deliquescent?

    1. Silica gel
    2. Quicklime
    3. Sodium hydroxide
    4. Copper sulphate pentahydrate
    Show answer

    Answer: C. Sodium hydroxide absorbs so much moisture from humid air that it dissolves in it. Silica gel and quicklime absorb moisture but stay solid, so they are hygroscopic.

  4. 4. What is the formula mass of gypsum, CaSO₄·2H₂O? (Ca = 40, S = 32, O = 16, H = 1)

    1. 136
    2. 154
    3. 172
    4. 190
    Show answer

    Answer: C. CaSO₄ = 40 + 32 + 64 = 136. Two water molecules = 2 × 18 = 36. Total = 136 + 36 = 172.

  5. 5. Why are small packets of silica gel placed in boxes of new electronics?

    1. It is hygroscopic and absorbs moisture without dissolving
    2. It is deliquescent and dissolves
    3. It produces oxygen
    4. It cools the box
    Show answer

    Answer: A. Silica gel is a hygroscopic drying agent. It takes up moisture from the air inside the box but stays a solid, keeping the goods dry.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Solutions

Privacy · Terms · Refunds · Delivery