• Practice
  • About 15 min
  • 5 practice questions

Saturated solutions and solubility

Tell saturated, unsaturated and supersaturated solutions apart, describe dilute and concentrated solutions, and calculate the solubility of a solute and the mass needed to saturate a given amount of water.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define saturated, unsaturated and supersaturated solutions.
  • Explain why 'dilute' and 'concentrated' are only comparisons.
  • Define solubility and calculate it from experimental data.
  • Use a solubility value to find how much solute saturates a given mass of water.

Keep adding salt to a glass of water and stirring. At first every spoonful disappears, but sooner or later the salt starts collecting at the bottom however long you stir. The water has dissolved as much as it can at that temperature. That limit is the key idea of this lesson.

Three kinds of solution by amount of solute

Using the textbook's example: sodium chloride dissolves up to 36 g per 100 g of water at 25 °C
KindMeaningExample at 25 °C (per 100 g water)
UnsaturatedContains less solute than it can dissolve; more will still dissolve10 g, 20 g or 30 g of NaCl
SaturatedNo more solute can dissolve at that temperature36 g of NaCl
SupersaturatedHolds more solute than a saturated solution would at that temperatureMore than 36 g, e.g. 40 g of NaCl, held in solution only under special conditions

A supersaturated solution is made by changing conditions, usually by saturating a solution at a higher temperature and cooling it very carefully. It is unstable: a jolt, a dust particle or a tiny seed crystal makes the extra solute come out as crystals.

Worked example 1: testing for saturation

Question: You are given two clear salt solutions at room temperature. How can you tell which one is saturated?

Working: Add a small crystal of salt to each and stir. In the unsaturated one the crystal dissolves. In the saturated one it stays undissolved, because no more solute can dissolve at that temperature. (If a solution suddenly grows many crystals, it was supersaturated.)

Dilute and concentrated

When we compare two solutions of the same solute in the same solvent, the one with more solute in a given amount of solvent is concentrated and the other is dilute. A cup of strong, sweet tea is more concentrated than a weak one. These words are qualitative: they compare, but they do not give a quantity. We often judge them from colour or density, for example a deep blue copper sulphate solution compared with a pale blue one.

Solubility

Solubility = the mass in grams of a solute that dissolves in 100 g of a solvent to form a saturated solution at a given temperature (and pressure). Solubility = (mass of solute ÷ mass of solvent) × 100.

According to the textbook, the solubility of sodium chloride in water at 25 °C is 36 g. Solubility always refers to 100 g of solvent (not 100 g of solution) and always needs a temperature, because it changes with temperature.

Finding solubility in an experiment

  1. Weigh the solvent e.g. 40 g of water at a fixed temperature
  2. Dissolve solute until saturated Stop when a little stays undissolved
  3. Find mass of solute dissolved Mass added minus mass left over
  4. Scale to 100 g of solvent Solubility = (solute ÷ solvent) × 100

Worked example 2: calculating solubility

Question (made-up data): At 40 °C, 12 g of a salt dissolves in 40 g of water to give a saturated solution. Find its solubility at 40 °C.

Working: Solubility = (12 ÷ 40) × 100 = 30 g per 100 g of water at 40 °C.

Worked example 3: mass needed to saturate

Question: Using 36 g per 100 g of water for sodium chloride at 25 °C, how much salt saturates 250 g of water at that temperature?

Working: 100 g of water takes 36 g, so 1 g of water takes 0.36 g, and 250 g takes 0.36 × 250 = 90 g of salt. The mass of the saturated solution is 250 + 90 = 340 g.

Key takeaways: an unsaturated solution can dissolve more, a saturated one cannot, and a supersaturated one holds extra solute unstably. Dilute and concentrated are comparisons, not amounts. Solubility is grams of solute per 100 g of solvent in a saturated solution at a stated temperature.

Check your understanding

  1. 1. A solution in which more solute can still dissolve at the same temperature is:

    1. Saturated
    2. Supersaturated
    3. Unsaturated
    4. Concentrated
    Show answer

    Answer: C. An unsaturated solution contains less solute than the maximum it can hold at that temperature, so more solute will still dissolve.

  2. 2. A small crystal is dropped into a clear solution and many crystals suddenly form. The solution was:

    1. Supersaturated
    2. Unsaturated
    3. Dilute
    4. Saturated
    Show answer

    Answer: A. A supersaturated solution holds more solute than it normally can. It is unstable, and a seed crystal makes the extra solute crystallise out at once.

  3. 3. At 30 °C, 9 g of a substance saturates 25 g of water. What is its solubility at 30 °C?

    1. 9 g
    2. 25 g
    3. 27 g
    4. 36 g
    Show answer

    Answer: D. Solubility = (mass of solute ÷ mass of solvent) × 100 = (9 ÷ 25) × 100 = 36 g per 100 g of water.

  4. 4. The solubility of a salt is 40 g at 50 °C. How much salt saturates 75 g of water at 50 °C?

    1. 30 g
    2. 40 g
    3. 53.3 g
    4. 75 g
    Show answer

    Answer: A. 40 g per 100 g of water means 0.40 g per gram of water. For 75 g: 0.40 × 75 = 30 g.

  5. 5. Why do we say 'dilute' and 'concentrated' are qualitative terms?

    1. They apply only to coloured solutions
    2. They compare solutions but do not state an amount
    3. They are measured in grams
    4. They describe only saturated solutions
    Show answer

    Answer: B. Calling one solution concentrated and another dilute only compares them. It does not give how many grams of solute are present.

Sign in to keep track of the lessons you finish.

Next lesson → Factors affecting solubility

Privacy · Terms · Refunds · Delivery