• Practice
  • About 22 min
  • 5 practice questions

Heterogeneous equilibria, the extent of reaction and the reaction quotient Q

Write K for heterogeneous equilibria leaving out pure solids and liquids, judge the extent of a reaction from the size of Kc, and compare Q with Kc to predict the direction of a reaction.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write Kc and Kp for heterogeneous equilibria.
  • Use the size of Kc to say whether a reaction barely starts, goes partly or nearly completes.
  • Calculate the reaction quotient Q and compare it with Kc to predict the direction of net change.

An equilibrium constant is useful because it lets us (1) predict how far a reaction goes, (2) predict which way a mixture will move, and (3) calculate equilibrium concentrations. It says nothing about rate: a reaction with a huge K can still be very slow.

K for heterogeneous equilibria

For CaCO₃(s) ⇌ CaO(s) + CO₂(g) we might first write Kc = [CaO][CO₂]/[CaCO₃]. But a pure solid does not spread out to fill its container: the number of moles in each litre of the solid itself is fixed at a given temperature. So the 'concentration' of a pure solid is a constant, and it is absorbed into K. The same is true for a pure liquid. Hence:

Leave pure solids and pure liquids out of K. For CaCO₃(s) ⇌ CaO(s) + CO₂(g): Kc = [CO₂] and Kp = p_CO₂.

— Heterogeneous equilibrium

For CO₂(g) + H₂O(l) ⇌ H⁺(aq) + HCO₃⁻(aq), water is a pure liquid, so Kc = [H⁺][HCO₃⁻]/[CO₂]. Amounts of solid present do not matter, as long as some of each solid is there.

Worked example 1: writing K for heterogeneous systems

(a) C(s) + H₂O(g) ⇌ CO(g) + H₂(g). Working: drop C(s). Kc = [CO][H₂]/[H₂O]; Kp = p_CO × p_H₂ / p_H₂O. Δng = 2 − 1 = +1 (gases only). (b) 3Fe(s) + 4H₂O(g) ⇌ Fe₃O₄(s) + 4H₂(g). Check balance: Fe 3 = 3; O 4 = 4; H 8 = 8. Drop both solids: Kc = [H₂]⁴/[H₂O]⁴ and Kp = p_H₂⁴/p_H₂O⁴. Here Δng = 4 − 4 = 0, so Kp = Kc.

Predicting the extent of a reaction

Kc shows how far the reaction has gone towards products at a given temperature. A large Kc means a large product yield at equilibrium; a small Kc means very little product. The Tamil Nadu textbook uses 10³ and 10⁻³ as rough dividing lines.

How the size of Kc relates to the extent of reaction (rough guide)
Value of KcComposition at equilibriumWhat it means
Kc < 10⁻³[Products] much less than [reactants]Reaction hardly proceeds; reverse is favoured
10⁻³ < Kc < 10³Significant amounts of bothNeither direction predominates
Kc > 10³[Products] much greater than [reactants]Reaction goes nearly to completion

Examples from the Tamil Nadu textbook: formation of HI from H₂ and I₂ at 700 K has Kc = 57.0 (both sides significant), while formation of HCl from H₂ and Cl₂ at 300 K has Kc of about 4 × 10³¹ (practically complete).

Predicting the direction: the reaction quotient Q

For xA + yB ⇌ lC + mD at any moment (not necessarily at equilibrium), the reaction quotient is Q = [C]ˡ[D]ᵐ/([A]ˣ[B]ʸ), using the concentrations at that moment. As the reaction runs, Q changes until it equals Kc; after that it stays fixed.

Compare Q with Kc

  • Q < Kc
    • Too little product
    • Net forward reaction
    • Q rises until Q = Kc
  • Q = Kc
    • System is at equilibrium
    • No net change
  • Q > Kc
    • Too much product
    • Net reverse reaction
    • Q falls until Q = Kc

Worked example 2: which way will HI go?

For H₂(g) + I₂(g) ⇌ 2HI(g), Kc = 50 at a certain temperature. A mixture has [H₂] = 0.50, [I₂] = 0.50 and [HI] = 1.0 mol L⁻¹. Working: Q = [HI]²/([H₂][I₂]) = (1.0)² ÷ (0.50 × 0.50) = 1.0 ÷ 0.25 = 4.0. Q < Kc (4 < 50), so the reaction moves forward, forming more HI.

Worked example 3: a mixture with too much product

For 2SO₂(g) + O₂(g) ⇌ 2SO₃(g), take Kc = 100 L mol⁻¹ (practice value). A mixture has [SO₃] = 0.40, [SO₂] = 0.020 and [O₂] = 0.10 mol L⁻¹. Working: Q = [SO₃]²/([SO₂]²[O₂]) = (0.40)² ÷ ((0.020)² × 0.10) = 0.16 ÷ (0.0004 × 0.10) = 0.16 ÷ 0.00004 = 4000. Q > Kc, so the net reaction goes in reverse: SO₃ decomposes until Q falls to 100.

Worked example 4: using moles and volume

For the same HI reaction (Kc = 50), 0.20 mol H₂, 0.40 mol I₂ and 2.0 mol HI are put into a 2.0 L flask. Working: concentrations are 0.10, 0.20 and 1.0 mol L⁻¹. Q = (1.0)² ÷ (0.10 × 0.20) = 1.0 ÷ 0.020 = 50 = Kc, so the mixture is already at equilibrium. (Because Δng = 0 here, the volume cancels; using moles directly also gives 2.0² ÷ (0.20 × 0.40) = 4.0 ÷ 0.08 = 50.)

Key takeaways: leave pure solids and liquids out of K. Big Kc, mostly products; small Kc, mostly reactants. Q has the same form as K but uses present concentrations: Q < K forward, Q = K equilibrium, Q > K reverse. K tells us nothing about speed.

Check your understanding

  1. 1. What is Kc for C(s) + CO₂(g) ⇌ 2CO(g)?

    1. [CO]²/([C][CO₂])
    2. [CO₂]/[CO]²
    3. [CO]/[CO₂]
    4. [CO]²/[CO₂]
    Show answer

    Answer: D. Carbon is a pure solid, so it is left out. Products over reactants, each raised to its coefficient: Kc = [CO]²/[CO₂]. The square on [CO] comes from the coefficient 2.

  2. 2. A reaction has Kc = 2 × 10⁻²⁵ at 300 K. What can be said?

    1. Hardly any product is present at equilibrium.
    2. The reaction is very slow.
    3. The reaction goes nearly to completion.
    4. Reactants and products are present in similar amounts.
    Show answer

    Answer: A. Kc is far below 10⁻³, so at equilibrium [products] is tiny compared with [reactants]. K says nothing about rate, so we cannot say the reaction is slow.

  3. 3. For N₂O₄(g) ⇌ 2NO₂(g), Kc = 0.21 at 373 K (value given in the Tamil Nadu textbook). A mixture has [N₂O₄] = 0.20 mol L⁻¹ and [NO₂] = 0.10 mol L⁻¹. What happens?

    1. Q = 0.50, so the reaction moves in reverse.
    2. Q = 0.05, so more NO₂ forms.
    3. Q = 0.21, so the mixture is at equilibrium.
    4. Q = 0.05, so more N₂O₄ forms.
    Show answer

    Answer: B. Q = [NO₂]²/[N₂O₄] = (0.10)² ÷ 0.20 = 0.010 ÷ 0.20 = 0.05. Q < Kc (0.05 < 0.21), so the net reaction goes forward and more NO₂ forms. Forgetting to square [NO₂] gives 0.50.

  4. 4. For CaCO₃(s) ⇌ CaO(s) + CO₂(g) at a fixed temperature, extra CaCO₃ is added to the vessel at equilibrium. What happens to the pressure of CO₂?

    1. It increases.
    2. It decreases.
    3. It stays the same.
    4. It becomes zero.
    Show answer

    Answer: C. Kp = p_CO₂. The solid's amount does not appear in K, so as long as some of each solid is present, the CO₂ pressure at equilibrium is fixed by temperature alone.

  5. 5. Which statement about the equilibrium constant is NOT correct?

    1. It can predict the direction of net reaction.
    2. It can be used to calculate equilibrium concentrations.
    3. It indicates how far the reaction proceeds.
    4. It tells us how fast equilibrium is reached.
    Show answer

    Answer: D. K describes the position of equilibrium, not the speed of getting there. Rates belong to chemical kinetics. The other three are genuine uses of K.

Privacy · Terms · Refunds · Delivery