- Practice
- About 24 min
- 5 practice questions
Law of mass action, Kc, Kp and the relation Kp = Kc(RT)^Δng
State the law of mass action, write Kc and Kp for a reaction, derive and use Kp = Kc(RT)^Δng, and find K for reversed, multiplied and combined reactions.
If something looks wrong, please tell us.
By the end of this lesson you can
- State the law of mass action and calculate active mass.
- Derive Kc = kf/kb and write Kc and Kp expressions from a balanced equation.
- Derive Kp = Kc(RT)^Δng and decide whether Kp is greater than, equal to or less than Kc.
- Find K for a reversed reaction, a multiplied reaction and a reaction that is the sum of others.
To say how far a reaction goes we need a number. That number comes from a rule found in 1864 by the Norwegian chemists Guldberg and Waage after studying many reversible reactions.
The law of mass action
At any instant, the rate of a chemical reaction at a given temperature is directly proportional to the product of the active masses of the reactants at that instant, each raised to its stoichiometric coefficient.
Active mass means molar concentration, written in square brackets: [A] = n/V in mol L⁻¹ (mol dm⁻³), where n is the number of moles and V the volume in litres. For example, 0.50 mol of a gas in a 2.0 L flask has active mass 0.50 ÷ 2.0 = 0.25 mol L⁻¹.
Deriving Kc
For the general reaction xA + yB ⇌ lC + mD, the law gives: forward rate r_f = k_f[A]ˣ[B]ʸ and reverse rate r_b = k_b[C]ˡ[D]ᵐ, where k_f and k_b are rate constants. At equilibrium r_f = r_b, so k_f[A]ˣ[B]ʸ = k_b[C]ˡ[D]ᵐ. Rearranging puts the constants together:
Kc = k_f/k_b = [C]ˡ[D]ᵐ / ([A]ˣ[B]ʸ), using equilibrium concentrations. For gases, Kp = (p_C)ˡ(p_D)ᵐ / ((p_A)ˣ(p_B)ʸ), using equilibrium partial pressures.
In words: at a given temperature, the product of the active masses of the products, each raised to its coefficient in the balanced equation, divided by the same product for the reactants, is a constant. Products always go on top. Kc depends on temperature only, not on the starting amounts.
Worked example 1: Kc from rate constants
For a reversible reaction, k_f = 3.0 × 10⁻² and k_b = 1.5 × 10⁻³ (practice values, same units). Working: Kc = k_f/k_b = (3.0 × 10⁻²) ÷ (1.5 × 10⁻³) = (3.0 ÷ 1.5) × 10⁻²⁺³ = 2.0 × 10¹ = 20. Since Kc > 1, the forward reaction is favoured.
Relation between Kp and Kc
For an ideal gas PV = nRT, so p = (n/V)RT = [gas] × RT. Substitute p_A = [A]RT and so on into Kp. Each term carries its power: p_Aˣ = [A]ˣ(RT)ˣ. Collecting the RT factors gives Kp = {[C]ˡ[D]ᵐ / ([A]ˣ[B]ʸ)} × (RT)^((l+m) − (x+y)). The first factor is Kc.
Kp = Kc(RT)^Δng, where Δng = (moles of gaseous products) − (moles of gaseous reactants). Use R = 0.0821 L atm K⁻¹ mol⁻¹ when Kp is in atm and Kc in mol L⁻¹.
| Δng | Result | Examples |
|---|---|---|
| 0 | Kp = Kc | H₂(g) + I₂(g) ⇌ 2HI(g); N₂(g) + O₂(g) ⇌ 2NO(g) |
| Positive | Kp > Kc (when RT > 1) | PCl₅(g) ⇌ PCl₃(g) + Cl₂(g); 2NH₃(g) ⇌ N₂(g) + 3H₂(g) |
| Negative | Kp < Kc (when RT > 1) | 2SO₂(g) + O₂(g) ⇌ 2SO₃(g); 2H₂(g) + O₂(g) ⇌ 2H₂O(g) |
Worked example 2: Kp for ammonia synthesis
For N₂(g) + 3H₂(g) ⇌ 2NH₃(g), Kc = 0.50 L² mol⁻² at 500 K (a practice value). Find Kp. Working: Δng = 2 − (1 + 3) = −2. RT = 0.0821 × 500 = 41.05. (RT)⁻² = 1 ÷ 41.05² = 1 ÷ 1685.1 = 5.934 × 10⁻⁴. Kp = 0.50 × 5.934 × 10⁻⁴ = 2.97 × 10⁻⁴ atm⁻². Kp < Kc, as expected for negative Δng.
Worked example 3: Kp for PCl₅ dissociation
For PCl₅(g) ⇌ PCl₃(g) + Cl₂(g), Kc = 0.040 mol L⁻¹ at 500 K (practice value). Working: Δng = 2 − 1 = +1, so Kp = Kc × RT = 0.040 × 41.05 = 1.64 atm. Kp > Kc.
Changing the way the equation is written
K belongs to an equation exactly as written. If you change the equation, K changes in a fixed way.
| Change to the equation | New constant |
|---|---|
| Reverse it (products become reactants) | K′ = 1/K |
| Multiply every coefficient by n | K′ = Kⁿ (n = ½ gives √K) |
| Add two or more equations (A ⇌ B, B ⇌ C, C ⇌ D give A ⇌ D) | K = K₁ × K₂ × K₃ |
Worked example 4: one reaction, three constants
For H₂(g) + I₂(g) ⇌ 2HI(g), Kc = 50 at some temperature. Working: (a) 2HI(g) ⇌ H₂(g) + I₂(g) is the reverse, so K′ = 1/50 = 0.020. (b) HI(g) ⇌ ½H₂(g) + ½I₂(g) is the reverse multiplied by ½, so K″ = (0.020)^½ = √0.020 = 0.141. Check (b) another way: K″ = 1/√50 = 1/7.071 = 0.141.
Key takeaways: rate ∝ product of active masses. Kc = k_f/k_b = products over reactants, each to the power of its coefficient. Kp = Kc(RT)^Δng with Δng counted over gases only. Reverse: 1/K; multiply by n: Kⁿ; add equations: multiply the Ks.
Check your understanding
-
1. For a reversible reaction, k_f = 2.4 × 10⁻³ and k_b = 6.0 × 10⁻⁵ (same units). What is Kc?
- 0.025
- 4.0
- 40
- 1.44 × 10⁻⁷
Show answer
Answer: C. Kc = k_f/k_b = (2.4 × 10⁻³) ÷ (6.0 × 10⁻⁵) = (2.4 ÷ 6.0) × 10⁻³⁺⁵ = 0.40 × 10² = 40. The value 0.025 is k_b/k_f, the constant of the reverse reaction, and 1.44 × 10⁻⁷ is the product, not the ratio.
-
2. For which reaction is Kp equal to Kc?
- N₂(g) + O₂(g) ⇌ 2NO(g)
- PCl₅(g) ⇌ PCl₃(g) + Cl₂(g)
- N₂(g) + 3H₂(g) ⇌ 2NH₃(g)
- 2SO₂(g) + O₂(g) ⇌ 2SO₃(g)
Show answer
Answer: A. Kp = Kc only when Δng = 0. For N₂ + O₂ ⇌ 2NO, Δng = 2 − 2 = 0. The others have Δng = +1, −2 and −1.
-
3. For 2SO₂(g) + O₂(g) ⇌ 2SO₃(g), what is the correct relation?
- Kp = Kc(RT)
- Kp = Kc(RT)⁻¹
- Kp = Kc(RT)²
- Kp = Kc
Show answer
Answer: B. Δng = moles of gaseous products − moles of gaseous reactants = 2 − (2 + 1) = −1, so Kp = Kc(RT)⁻¹ = Kc/RT.
-
4. For A ⇌ B, K₁ = 4; for B ⇌ C, K₂ = 0.5; for C ⇌ D, K₃ = 10. What is K for A ⇌ D?
- 14.5
- 0.8
- 80
- 20
Show answer
Answer: D. Adding the three equations gives A ⇌ D, so K = K₁ × K₂ × K₃ = 4 × 0.5 × 10 = 20. Constants are multiplied, not added (14.5 is the sum).
-
5. Kc for N₂(g) + 3H₂(g) ⇌ 2NH₃(g) is K. What is Kc for NH₃(g) ⇌ ½N₂(g) + (3/2)H₂(g)?
- K²
- 1/K²
- 1/√K
- √K
Show answer
Answer: C. The new equation is the original reversed (giving 1/K) and then halved (raising to the power ½). So the constant is (1/K)^½ = 1/√K.
Sign in to keep track of the lessons you finish.