• Practice
  • About 20 min
  • 5 practice questions

Reversible processes and the dynamic nature of equilibrium

Explain what equilibrium means, describe physical equilibria (solid-liquid, liquid-vapour, solid-vapour, solutions) and chemical equilibrium, and tell homogeneous from heterogeneous equilibria.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Tell a reversible change from a change that goes one way only.
  • Describe solid-liquid, liquid-vapour and solid-vapour equilibria and the equilibria of solids and gases dissolving in liquids.
  • Explain why chemical equilibrium is dynamic and not static.
  • Classify an equilibrium as homogeneous or heterogeneous.

Some changes go only one way: a banana ripens, iron rusts, silver tarnishes. Others can run both ways. In the lungs, haemoglobin picks up oxygen to form oxyhaemoglobin, and oxyhaemoglobin can give the oxygen back, so all three species are present together. A reaction that can go in both directions is a reversible reaction. For any reaction we want to know three things: is it feasible (thermodynamics answers this), how fast is it (chemical kinetics), and how far does it go (the equilibrium constant, the subject of this unit).

What equilibrium means

Think of a see-saw with two children of equal weight sitting at equal distances, or a tug-of-war in which both teams pull equally hard: nothing moves, because two opposite effects balance. In a reversible process the two opposite changes are rates: when the forward rate equals the reverse rate, the amounts of all substances stop changing. Unlike the still see-saw, though, both processes keep going.

Physical equilibrium

A system is in physical equilibrium when the amount of matter in each phase does not change with time. Nothing seems to happen, yet molecules keep moving between the phases.

Kinds of physical equilibrium
EquilibriumExampleRates that are equal
Solid ⇌ liquidH₂O(s) ⇌ H₂O(l) in a closed flask at 273 K and 1 atmRate of melting = rate of freezing
Liquid ⇌ vapourH₂O(l) ⇌ H₂O(g) in a closed vessel at 373 K and 1 atmRate of evaporation = rate of condensation
Solid ⇌ vapourI₂(s) ⇌ I₂(g); camphor(s) ⇌ camphor(g)Rate of sublimation = rate of deposition
Solid in liquidSugar(solid) ⇌ sugar(solution) in a saturated solutionRate of dissolution = rate of crystallisation
Gas in liquidCO₂(g) ⇌ CO₂(solution) in a sealed soda bottleRate of dissolving = rate of escape

Each phase equilibrium exists only at a particular temperature and pressure. The temperature at which solid and liquid are in equilibrium is the melting point (freezing point); the temperature at which liquid and vapour are in equilibrium (at 1 atm) is the boiling point (condensation point). In a closed jar of iodine crystals the violet colour of the vapour first deepens, then settles at a constant shade: the vapour has reached equilibrium with the solid. A gas dissolving in a liquid under pressure follows Henry's law (unit 9).

Chemical equilibrium and why it is dynamic

Take a general reversible reaction A + B ⇌ C + D starting with A and B only. At first only the forward reaction runs, fast, because [A] and [B] are large. As C and D build up they begin to react back, so the reverse rate rises while the forward rate falls. Eventually the two rates become equal: from then on no change in amounts can be seen. This is chemical equilibrium. The same state is reached whether we start from reactants or from products.

How a reversible reaction reaches equilibrium

  1. Start: only reactants Forward rate is large, reverse rate is zero.
  2. Products form Reactant concentrations fall, so the forward rate falls.
  3. Reverse reaction speeds up Products are now present to react back.
  4. Rates become equal Forward rate = reverse rate; concentrations stay constant.

Imagine people walking up and down between two floors of a building. If, every minute, as many people go up as come down, the number on each floor stays fixed although people never stop moving. A reaction at equilibrium is like that: the forward and reverse reactions do not stop; they proceed at equal rates, so there is no macroscopic (visible, measurable) change. Chemical equilibrium is therefore a dynamic equilibrium, for example H₂(g) + I₂(g) ⇌ 2HI(g).

At equilibrium: rate of forward reaction = rate of reverse reaction, so concentrations stay constant. They are constant, not equal to each other.

— Dynamic equilibrium

Homogeneous and heterogeneous equilibria

Two kinds of equilibrium by phase

  • Homogeneous equilibrium
    • All reactants and products in one phase
    • H₂(g) + I₂(g) ⇌ 2HI(g): all gases
    • CH₃COOCH₃(aq) + H₂O ⇌ CH₃COOH(aq) + CH₃OH(aq): all in one solution
  • Heterogeneous equilibrium
    • Substances in two or more phases
    • H₂O(l) ⇌ H₂O(g)
    • CaCO₃(s) ⇌ CaO(s) + CO₂(g)

Worked example 1: classifying equilibria

Classify (a) N₂(g) + 3H₂(g) ⇌ 2NH₃(g), (b) C(s) + H₂O(g) ⇌ CO(g) + H₂(g), (c) Fe³⁺(aq) + SCN⁻(aq) ⇌ [Fe(SCN)]²⁺(aq). Working: list the phases in each. (a) gas, gas, gas: one phase, homogeneous. (b) solid carbon plus three gases: two phases, heterogeneous. (c) all three species dissolved in the same water: one phase, homogeneous.

Worked example 2: reading a closed-flask experiment

Ice and water are kept in a sealed thermos flask at 273 K and 1 atm, and after an hour the mass of ice is unchanged. Has melting stopped? Working: the masses are constant, so the two rates must be equal. Molecules still leave the ice and join it at the same rate (melting = freezing). Melting has not stopped; the equilibrium is dynamic. If the flask were warmed above 273 K, melting would become faster than freezing and the ice would disappear.

Key takeaways: a reversible process reaches equilibrium when opposite rates become equal. Physical equilibria involve phases; chemical equilibria involve reactions. Equilibrium is dynamic: both processes continue, but amounts stay constant. One phase means homogeneous; more than one, heterogeneous.

Check your understanding

  1. 1. Which of these equilibria is heterogeneous?

    1. H₂(g) + I₂(g) ⇌ 2HI(g)
    2. N₂(g) + O₂(g) ⇌ 2NO(g)
    3. CaCO₃(s) ⇌ CaO(s) + CO₂(g)
    4. 2SO₂(g) + O₂(g) ⇌ 2SO₃(g)
    Show answer

    Answer: C. Calcium carbonate and calcium oxide are solids while carbon dioxide is a gas, so more than one phase is present: heterogeneous. The other three involve gases only, a single phase, so they are homogeneous.

  2. 2. Water and its vapour are in equilibrium in a closed vessel at 373 K and 1 atm. Which statement is true?

    1. The rate of evaporation equals the rate of condensation.
    2. Evaporation has stopped completely.
    3. The amount of vapour keeps increasing slowly.
    4. Condensation is faster than evaporation.
    Show answer

    Answer: A. At a liquid-vapour equilibrium molecules keep leaving and returning to the liquid, at the same rate. Neither process stops, and because the rates are equal the amount of vapour is constant.

  3. 3. Why is chemical equilibrium called a dynamic equilibrium?

    1. Because the reaction stops once equilibrium is reached.
    2. Because the forward and reverse reactions continue at equal rates.
    3. Because the concentrations of reactants and products become equal.
    4. Because the temperature keeps changing at equilibrium.
    Show answer

    Answer: B. Both reactions keep running; only their rates are equal, so no net change is seen. Concentrations become constant, not equal to each other, and the reaction does not stop.

  4. 4. Solid iodine is placed in a closed glass vessel. How does the violet colour inside change?

    1. It stays colourless because iodine does not vaporise.
    2. It keeps deepening for as long as any solid is left.
    3. It appears and then fades away completely.
    4. It deepens at first and then remains at a constant shade.
    Show answer

    Answer: D. Iodine sublimes, so violet vapour builds up. As the vapour increases, deposition back to the solid speeds up until it equals the rate of sublimation. From then on the amount of vapour, and so the colour, stays constant.

  5. 5. Assertion (A): At equilibrium the concentrations of reactants and products are always equal. Reason (R): At equilibrium the rate of the forward reaction equals the rate of the reverse reaction.

    1. Both A and R are true, and R is the correct explanation of A.
    2. Both A and R are true, but R is not the correct explanation of A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: D. R is the definition of equilibrium and is true. A is false: equal rates make the concentrations constant, but they can be very different from each other (for example, almost all product and very little reactant).

Privacy · Terms · Refunds · Delivery