Revision notes

Unit 8 Physical and Chemical Equilibrium: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Reversible processes and the dynamic nature of equilibrium

Kinds of physical equilibrium
EquilibriumExampleRates that are equal
Solid ⇌ liquidH₂O(s) ⇌ H₂O(l) in a closed flask at 273 K and 1 atmRate of melting = rate of freezing
Liquid ⇌ vapourH₂O(l) ⇌ H₂O(g) in a closed vessel at 373 K and 1 atmRate of evaporation = rate of condensation
Solid ⇌ vapourI₂(s) ⇌ I₂(g); camphor(s) ⇌ camphor(g)Rate of sublimation = rate of deposition
Solid in liquidSugar(solid) ⇌ sugar(solution) in a saturated solutionRate of dissolution = rate of crystallisation
Gas in liquidCO₂(g) ⇌ CO₂(solution) in a sealed soda bottleRate of dissolving = rate of escape

How a reversible reaction reaches equilibrium

  1. Start: only reactants Forward rate is large, reverse rate is zero.
  2. Products form Reactant concentrations fall, so the forward rate falls.
  3. Reverse reaction speeds up Products are now present to react back.
  4. Rates become equal Forward rate = reverse rate; concentrations stay constant.

At equilibrium: rate of forward reaction = rate of reverse reaction, so concentrations stay constant. They are constant, not equal to each other.

— Dynamic equilibrium

Two kinds of equilibrium by phase

  • Homogeneous equilibrium
    • All reactants and products in one phase
    • H₂(g) + I₂(g) ⇌ 2HI(g): all gases
    • CH₃COOCH₃(aq) + H₂O ⇌ CH₃COOH(aq) + CH₃OH(aq): all in one solution
  • Heterogeneous equilibrium
    • Substances in two or more phases
    • H₂O(l) ⇌ H₂O(g)
    • CaCO₃(s) ⇌ CaO(s) + CO₂(g)

Key takeaways: a reversible process reaches equilibrium when opposite rates become equal. Physical equilibria involve phases; chemical equilibria involve reactions. Equilibrium is dynamic: both processes continue, but amounts stay constant. One phase means homogeneous; more than one, heterogeneous.

Read the full lesson

Lesson 2

Law of mass action, Kc, Kp and the relation Kp = Kc(RT)^Δng

At any instant, the rate of a chemical reaction at a given temperature is directly proportional to the product of the active masses of the reactants at that instant, each raised to its stoichiometric coefficient.

— Law of mass action (Guldberg and Waage), in our words

Kc = k_f/k_b = [C]ˡ[D]ᵐ / ([A]ˣ[B]ʸ), using equilibrium concentrations. For gases, Kp = (p_C)ˡ(p_D)ᵐ / ((p_A)ˣ(p_B)ʸ), using equilibrium partial pressures.

— Equilibrium constants

Kp = Kc(RT)^Δng, where Δng = (moles of gaseous products) − (moles of gaseous reactants). Use R = 0.0821 L atm K⁻¹ mol⁻¹ when Kp is in atm and Kc in mol L⁻¹.

— Kp and Kc
What Δng tells us
ΔngResultExamples
0Kp = KcH₂(g) + I₂(g) ⇌ 2HI(g); N₂(g) + O₂(g) ⇌ 2NO(g)
PositiveKp > Kc (when RT > 1)PCl₅(g) ⇌ PCl₃(g) + Cl₂(g); 2NH₃(g) ⇌ N₂(g) + 3H₂(g)
NegativeKp < Kc (when RT > 1)2SO₂(g) + O₂(g) ⇌ 2SO₃(g); 2H₂(g) + O₂(g) ⇌ 2H₂O(g)
Rules for related equilibrium constants
Change to the equationNew constant
Reverse it (products become reactants)K′ = 1/K
Multiply every coefficient by nK′ = Kⁿ (n = ½ gives √K)
Add two or more equations (A ⇌ B, B ⇌ C, C ⇌ D give A ⇌ D)K = K₁ × K₂ × K₃

Key takeaways: rate ∝ product of active masses. Kc = k_f/k_b = products over reactants, each to the power of its coefficient. Kp = Kc(RT)^Δng with Δng counted over gases only. Reverse: 1/K; multiply by n: Kⁿ; add equations: multiply the Ks.

Read the full lesson

Lesson 3

Heterogeneous equilibria, the extent of reaction and the reaction quotient Q

Leave pure solids and pure liquids out of K. For CaCO₃(s) ⇌ CaO(s) + CO₂(g): Kc = [CO₂] and Kp = p_CO₂.

— Heterogeneous equilibrium
How the size of Kc relates to the extent of reaction (rough guide)
Value of KcComposition at equilibriumWhat it means
Kc < 10⁻³[Products] much less than [reactants]Reaction hardly proceeds; reverse is favoured
10⁻³ < Kc < 10³Significant amounts of bothNeither direction predominates
Kc > 10³[Products] much greater than [reactants]Reaction goes nearly to completion

Compare Q with Kc

  • Q < Kc
    • Too little product
    • Net forward reaction
    • Q rises until Q = Kc
  • Q = Kc
    • System is at equilibrium
    • No net change
  • Q > Kc
    • Too much product
    • Net reverse reaction
    • Q falls until Q = Kc

Key takeaways: leave pure solids and liquids out of K. Big Kc, mostly products; small Kc, mostly reactants. Q has the same form as K but uses present concentrations: Q < K forward, Q = K equilibrium, Q > K reverse. K tells us nothing about speed.

Read the full lesson

Lesson 4

Calculating equilibrium concentrations: HI, PCl₅ and NH₃

Method for equilibrium problems

  1. Balanced equation Coefficients fix how the amounts change.
  2. Initial moles Write what was put in (0 for absent products).
  3. Change Reactants lose x times their coefficient; products gain the same way.
  4. Equilibrium moles and concentrations Initial ± change, then divide by V.
  5. Substitute in K and solve Check the answer by putting it back into K.
H₂(g) + I₂(g) ⇌ 2HI(g), starting with a mol H₂ and b mol I₂ in volume V
StageH₂I₂HI
Initial molesab0
Reacted / formedxx2x formed
At equilibriuma − xb − x2x
Concentration(a − x)/V(b − x)/V2x/V

HI: Kc = Kp = 4x²/((a − x)(b − x)). PCl₅: Kc = x²/((a − x)V), Kp = x²P/((a − x)(a + x)). NH₃: Kc = 4x²V²/((a − x)(b − 3x)³).

— Expressions to remember

Key takeaways: use the coefficients to write every change in terms of one unknown x. V cancels when Δng = 0 (HI) but not otherwise (PCl₅, NH₃). Always check by substituting back into K.

Read the full lesson

Lesson 5

Le Chatelier's principle and the van't Hoff equation

If a system at equilibrium is disturbed, it shifts in the direction that tends to cancel the effect of the disturbance.

— Le Chatelier's principle, in our words
Summary of Le Chatelier's principle
ChangeDirection of shiftDoes K change?
Add reactant or remove productForwardNo
Add product or remove reactantReverseNo
Increase pressureTowards fewer moles of gasNo
Decrease pressureTowards more moles of gasNo
Raise temperatureTowards the endothermic reactionYes
Lower temperatureTowards the exothermic reactionYes
Add a catalystNo shift (equilibrium reached faster)No
Add inert gas at constant volumeNo shiftNo

log(K₂/K₁) = [ΔH°/(2.303R)] × [(T₂ − T₁)/(T₁T₂)], with R = 8.314 J K⁻¹ mol⁻¹ and ΔH° in J mol⁻¹.

— Integrated van't Hoff equation

Key takeaways: the system opposes any disturbance. Concentration and pressure shift the position, not K. Temperature changes K: heating favours the endothermic side. Catalysts and inert gas at constant volume cause no shift. log(K₂/K₁) = ΔH°(T₂ − T₁)/(2.303R T₁T₂).

Read the full lesson

Privacy · Terms · Refunds · Delivery