- Practice
- About 20 min
- 5 practice questions
Iso-quants, iso-cost line, producer's equilibrium and the Cobb-Douglas function
Draw an iso-quant from a schedule, compute the marginal rate of technical substitution, construct an iso-cost line, find the least-cost combination, and apply the Cobb-Douglas production function.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define an iso-quant, its assumptions and properties, and calculate MRTS_LK.
- Build an iso-cost line from a budget and factor prices.
- State the conditions for producer's equilibrium (MRTS_LK = P_L/P_K) and use Q = A Lᵅ Kᵝ to judge returns to scale.
A consumer uses indifference curves and a budget line to choose goods. A producer uses very similar tools to choose inputs: iso-quants show what can be produced, and the iso-cost line shows what the firm can afford.
Iso-quants
'Iso' means equal and 'quant' means quantity. An iso-quant joins all combinations of two inputs (here labour and capital) that give the same output; Ferguson describes it as showing all input combinations physically capable of producing a given output. It is also called an equal product curve or product indifference curve. A set of iso-quants is an iso-quant map.
Assumptions: only two factors; factors divisible into small units; technique constant; the factors can be substituted (variable proportions); and they are used with maximum efficiency.
Worked example 1: iso-quant schedule and MRTS (made-up figures)
| Combination | Labour (L) | Capital (K) | Output | ΔK given up for 1 more L = MRTS_LK |
|---|---|---|---|---|
| A | 1 | 20 | 200 chairs | - |
| B | 2 | 14 | 200 chairs | 20 − 14 = 6 |
| C | 3 | 10 | 200 chairs | 14 − 10 = 4 |
| D | 4 | 7 | 200 chairs | 10 − 7 = 3 |
| E | 5 | 5 | 200 chairs | 7 − 5 = 2 |
The marginal rate of technical substitution of labour for capital (MRTS_LK) is the amount of capital that one more unit of labour can replace, output unchanged: MRTS_LK = ΔK/ΔL. Here it falls 6, 4, 3, 2: a diminishing MRTS, which makes the iso-quant convex. (A straight-line iso-quant would show constant MRTS, a concave one increasing MRTS.)
Properties of iso-quants
- Negative slope: more of one factor means less of the other for the same output.
- Convex to the origin: because MRTS_LK diminishes.
- Do not intersect: a crossing point would have to give two different outputs at once.
- A higher iso-quant shows a higher output, since it uses more of the factors.
- Do not touch either axis: production needs both factors.
The iso-cost line
The iso-cost line (iso-price, iso-outlay or total outlay line) shows all combinations of two factors a firm can buy with a given budget at given factor prices. Its intercepts are budget ÷ price of each factor; its slope is P_L/P_K.
Worked example 2: building an iso-cost line (made-up figures)
| Combination | Capital at ₹40 | Labour at ₹20 | Spending = 40K + 20L (₹) |
|---|---|---|---|
| P | 5 | 0 | 200 + 0 = 200 |
| Q | 4 | 2 | 160 + 40 = 200 |
| R | 3 | 4 | 120 + 80 = 200 |
| S | 2 | 6 | 80 + 120 = 200 |
| T | 1 | 8 | 40 + 160 = 200 |
| U | 0 | 10 | 0 + 200 = 200 |
All on capital: 200 ÷ 40 = 5 units; all on labour: 200 ÷ 20 = 10 units. Each extra 2 workers cost the same as 1 unit of capital, so the slope (in capital per worker) is P_L/P_K = 20 ÷ 40 = 0.5.
Producer's equilibrium
Producer's equilibrium is the optimum (least-cost) combination of factors: either maximum output for a given outlay or minimum cost for a given output. Two conditions: (1) the iso-cost line is tangent to an iso-quant; (2) at that point the iso-quant is convex (MRTS diminishing). At the tangency the slopes are equal:
Producer's equilibrium: MRTS_LK = P_L ÷ P_K, with the iso-quant convex at the point of tangency.
Applying it to the examples: P_L/P_K = 0.5. Points on higher iso-cost lines would need a bigger budget than the firm has; points on the line but on a lower iso-quant give less output. The firm chooses the point where its highest reachable iso-quant just touches the line, where giving up capital for labour happens at exactly the market rate of 0.5.
Cobb-Douglas production function
Developed by Charles W. Cobb and Paul H. Douglas from a study of American manufacturing, it is written Q = A Lᵅ Kᵝ, where A is a positive constant and α, β are positive fractions (the output elasticities of labour and capital). In the original form α + β = 1, so it is linear homogeneous, showing constant returns to scale, with elasticity of substitution equal to one. The textbook notes their finding that labour contributed about three-fourths and capital about one-fourth of output.
| α + β | Returns to scale |
|---|---|
| = 1 | Constant |
| < 1 | Diminishing |
| > 1 | Increasing |
Worked example 3: testing returns to scale (made-up function)
Let Q = 2 L^0.5 K^0.5. Step 1: with L = 4 and K = 9, Q = 2 × √4 × √9 = 2 × 2 × 3 = 12. Step 2: double both: L = 8, K = 18. Q = 2 × √8 × √18 = 2 × √(8 × 18) = 2 × √144 = 2 × 12 = 24. Step 3: output exactly doubles, as expected since α + β = 0.5 + 0.5 = 1: constant returns to scale.
Key takeaways: an iso-quant shows input combinations giving equal output; MRTS_LK = ΔK/ΔL diminishes, so iso-quants are convex, downward sloping and never cross. An iso-cost line shows affordable combinations with slope P_L/P_K. Least cost is at tangency, MRTS_LK = P_L/P_K. In Q = A Lᵅ Kᵝ, α + β tells returns to scale.
Check your understanding
-
1. An iso-quant is also called:
- an iso-cost line
- a budget line
- an equal product curve
- a supply curve
Show answer
Answer: C. An iso-quant joins input combinations giving the same output, so it is an equal product (or product indifference) curve.
-
2. Made up: moving along an iso-quant, 2 more units of labour replace 8 units of capital. MRTS_LK is:
- 4
- 16
- 0.25
- 6
Show answer
Answer: A. MRTS_LK = ΔK/ΔL = 8 ÷ 2 = 4 units of capital per unit of labour.
-
3. Made up: a firm has ₹600; labour costs ₹30 a unit and capital ₹60 a unit. The maximum labour it can hire is:
- 10
- 30
- 60
- 20
Show answer
Answer: D. All the budget on labour: 600 ÷ 30 = 20 units. Capital alone would give 600 ÷ 60 = 10 units.
-
4. At the producer's equilibrium:
- MRTS_LK = P_L ÷ P_K
- MRTS_LK is zero
- the iso-cost line cuts the iso-quant twice
- the iso-quant is concave
Show answer
Answer: A. The least-cost combination is where the iso-cost line is tangent to the iso-quant, so their slopes match: MRTS_LK = P_L/P_K, with the iso-quant convex.
-
5. In Q = A L^0.7 K^0.4, returns to scale are:
- constant
- increasing
- diminishing
- negative
Show answer
Answer: B. α + β = 0.7 + 0.4 = 1.1, which is greater than 1, so returns to scale are increasing.
Sign in to keep track of the lessons you finish.