• Practice
  • About 18 min
  • 5 practice questions

Production function and the law of variable proportions

State the production function, tell the short run from the long run, calculate total, average and marginal product, and identify the three stages of the law of variable proportions.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write the production function Q = f(N, L, K, T) and explain short-run and long-run production.
  • Calculate TP, AP = TP/N and MP = TPₙ − TPₙ₋₁ from a schedule.
  • State the law of variable proportions, its assumptions and the three stages of production.

If a farmer keeps the same field and adds more and more workers, does output keep rising at the same pace? Common sense says no: after a point the field becomes crowded. The law of variable proportions makes that idea exact.

Production function

A production function is the relationship between inputs and output. Stigler described it as the relation between inputs of productive services per unit of time and outputs per unit of time. It is written Q = f(N, L, K, T): output Q depends on land (N), labour (L), capital (K) and technology (T). It differs between producers with their efficiency.

Short run and long run

  • Short run
    • Some inputs fixed, some variable
    • No new firms enter, existing ones do not leave
    • Studied through the law of variable proportions
  • Long run
    • All inputs variable
    • Firms can enter and leave the industry
    • Studied through the laws of returns to scale

TP, AP and MP

  • Total product (TP): total output in a period; TP = ΣMP.
  • Average product (AP): output per unit of the variable input; AP = TP/N.
  • Marginal product (MP): addition to TP from one more unit of the variable input; MP = ΔTP/ΔN, or MP = TPₙ − TPₙ₋₁.

The law of variable proportions

When one input is increased while the others stay fixed, total output at first rises at an increasing rate, then at a diminishing rate, reaches a maximum, and finally falls; MP eventually becomes negative. Stigler's version: beyond a certain point, equal additions of one input, others held constant, bring smaller and smaller additions to output.

Assumptions: only one factor varies, others are fixed; units of the variable factor are homogeneous; output is measured in physical units; technology does not change; and the price of the product does not change.

Worked example 1: workers on a fixed plot (made-up schedule)

Workers (L)TP (quintals)MP = TPₙ − TPₙ₋₁AP = TP ÷ LStage
1444 ÷ 1 = 4.00I
210610 ÷ 2 = 5.00I
318818 ÷ 3 = 6.00I
424624 ÷ 4 = 6.00I ends (AP max, AP = MP)
528428 ÷ 5 = 5.60II
628028 ÷ 6 = 4.67II ends (TP max, MP = 0)
725−325 ÷ 7 = 3.57III

Check: ΣMP = 4 + 6 + 8 + 6 + 4 + 0 − 3 = 25 = TP of 7 workers. MP rises to 8 (3rd worker), then falls; TP rises at an increasing rate up to the 3rd worker (the point of inflexion follows), then at a decreasing rate, peaks at 28 when MP = 0, and falls once MP is negative. AP rises while MP is above it, is greatest (6) where MP = AP, and falls after that, staying positive.

The three stages in brief
StageTotal productMarginal productAverage product
I: increasing returnsRises at an increasing rate, then at a decreasing rateRises, reaches a maximum, starts to fallRises to its maximum
II: diminishing returnsRises at a diminishing rate to its maximumFalls and becomes zeroEquals MP, then falls
III: negative returnsFallsNegativeFalls but stays positive

Path of marginal product as workers are added

  1. MP rising Better use of the fixed factor; specialisation.
  2. MP = AP AP at its peak; stage I ends.
  3. MP falling to zero TP at its maximum; stage II ends.
  4. MP negative Too many workers for the fixed factor; TP falls.

A sensible producer works in stage II: in stage I the fixed factor is under-used and adding labour raises AP, while in stage III extra workers actually reduce output.

MP = TPₙ − TPₙ₋₁; AP = TP ÷ N. When MP > AP, AP rises; when MP = AP, AP is maximum; when MP = 0, TP is maximum; when MP < 0, TP falls.

— Remember

Worked example 2: reading a stage

Made up: TP for 5, 6 and 7 machine operators on a fixed set of looms is 60, 66 and 66 metres. Step 1: MP of the 6th = 66 − 60 = 6; of the 7th = 66 − 66 = 0. Step 2: AP at 6 = 66 ÷ 6 = 11; at 7 = 66 ÷ 7 ≈ 9.43. Conclusion: at the 7th operator MP = 0 and TP is at its maximum, the end of stage II. Adding an 8th operator would push the firm into stage III.

Key takeaways: Q = f(N, L, K, T). In the short run one input varies; the law of variable proportions describes three stages: increasing returns (to AP max), diminishing returns (to TP max, MP = 0) and negative returns (MP < 0). Rational production takes place in stage II.

Check your understanding

  1. 1. In the short run:

    1. all inputs are variable
    2. some inputs are fixed and others variable
    3. new firms freely enter
    4. technology always changes
    Show answer

    Answer: B. The short run is defined by the presence of at least one fixed input; in the long run all inputs vary.

  2. 2. Made up: TP with 3 and 4 workers is 30 and 38. MP of the 4th worker is:

    1. 38
    2. 9.5
    3. 8
    4. 10
    Show answer

    Answer: C. MP₄ = TP₄ − TP₃ = 38 − 30 = 8. 9.5 is AP (38 ÷ 4); 38 is TP.

  3. 3. Total product is maximum when marginal product is:

    1. zero
    2. maximum
    3. equal to AP
    4. negative
    Show answer

    Answer: A. TP rises while MP is positive and falls once MP is negative, so TP peaks where MP = 0, the end of stage II.

  4. 4. Stage I of the law of variable proportions ends where:

    1. MP becomes negative
    2. TP falls
    3. MP becomes zero
    4. AP is maximum and equal to MP
    Show answer

    Answer: D. Stage I is the stage of increasing returns to the variable factor; it ends where AP reaches its maximum, which is where MP = AP.

  5. 5. Made up: TP for 1 to 4 workers is 5, 12, 18, 22. AP of 4 workers is:

    1. 4
    2. 5.5
    3. 22
    4. 6
    Show answer

    Answer: B. AP = TP ÷ L = 22 ÷ 4 = 5.5. MP of the 4th worker would be 22 − 18 = 4.

Privacy · Terms · Refunds · Delivery