Revision notes

Unit 10 Representation of Relief Features and Climatic Data: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Methods of showing relief on a flat map

Point methods of showing height
MethodWhat it showsHow it appears
Spot heightThe surveyed height of a point above mean sea level.A dot with the height written beside it, for example · 158.
Bench mark (BM)A surveyed height marked on a permanent object such as a building, pillar or bridge.The letters BM with the height, for example BM 84.
Trigonometrical stationA point used in the triangulation survey, with its height.A small triangle with the height beside it.

Methods of showing relief

  • Line methods
    • Hachures
    • Contours
    • Form lines
  • Point methods
    • Spot heights
    • Bench marks
    • Trigonometrical stations
  • Tone and colour methods
    • Hill shading
    • Layer colouring

Contours give exact heights and slopes without hiding other details; hachures and hill shading give a picture but no heights; layer colours give height bands at a glance.

Key takeaways: relief is shown by hachures (slope lines), contours (equal-height lines, in brown), form lines (unsurveyed, broken), spot heights (dots), bench marks (BM on permanent objects), trigonometrical stations (triangles), hill shading (shadows) and layer colouring (blue, green, browns, white).

Read the full lesson

Lesson 2

Contours: properties, contour interval and slope

Contour interval = (difference between two labelled contours) ÷ (number of intervals between them).

What contour spacing tells you

  • Close together
    • Steep slope
    • Cliffs where they almost touch
    • Gorges in river courses
  • Evenly spaced
    • Uniform slope
    • Same gradient throughout
  • Far apart
    • Gentle slope
    • Plains when very wide
    • Flat plateau tops

Key takeaways: contours are brown lines of equal height above mean sea level, at a regular interval (generally 20 m on 1 : 50,000 sheets); every fifth one is thicker; they do not cross except at an overhanging cliff. Close spacing means steep, wide spacing means gentle. CI = difference ÷ gaps; gradient = rise ÷ horizontal distance.

Read the full lesson

Lesson 3

Identifying landforms from contour patterns

Contour patterns of landforms
LandformContour pattern (textbook's description, in brief)
HillRoughly circular closed contours, values rising inwards; the textbook takes a hill as less than 1,000 m high.
PlateauAn elevated area whose innermost contour is wide and roughly rectangular, with outer contours close together (steep sides); the textbook gives a usual height of 300-600 m. Enclosed by mountains it is an intermontane plateau; at the foot of mountains, a piedmont plateau.
RidgeAn elongated, steep-sided high land with two or more peaks, shown by elliptical contours.
Col and saddleA col is a narrow, low depression between two peaks; a saddle is similar but higher, broader and more gently sloping.
V-shaped valleyContours bend sharply in a V across the river, with the apex pointing towards higher ground.
SpurA tongue of land from higher to lower ground; contours bend in a V with the apex pointing towards lower ground.
WaterfallContours meet at one point on the river course.
CliffA very steep slope of a valley side or coast (a sea cliff near the sea); contours run very close or merge.
GorgeA very steep, narrow valley at higher elevations; contours close together on both sides of the river.
VolcanoClosed contours whose innermost contours have lower values than those around them, showing the crater.

Valley versus spur

  • V-shaped valley
    • Apex of V points to higher ground
    • River flows along the V
    • Formed by vertical erosion of the river
  • Spur
    • Apex of V points to lower ground
    • Projection of land between valleys
    • Contours bend smoothly

Valley: the V points up the hill. Spur: the V points down the hill.

Key takeaways: closed rising contours mean a hill; steep sides with a broad level top mean a plateau; elongated contours with several peaks mean a ridge, with a col or saddle between peaks; a V pointing uphill is a valley, downhill a spur; contours meeting on a river mark a waterfall (height = top minus bottom contour); converging contours mark cliffs and gorges; a lower inner ring marks a volcano's crater.

Read the full lesson

Lesson 4

Drawing a cross section from contours

Cross section in brief

  1. Line AB Draw the section line on the contour map.
  2. Vertical scale Equal-spaced lines, one per contour value.
  3. Drop points From each crossing of AB and a contour, drop down to its value.
  4. Join and shade Join the points smoothly and shade below.

Profile points: where AB crosses a contour, drop a line to that contour's height. Join the points and the land appears.

Key takeaways: a cross section shows the land in side view along a line AB. Use equally spaced horizontal lines for the contour values, drop a point from each crossing to its value, join smoothly and shade. Steep parts show as rapid rises over short distances; the shape reveals hills, valleys, plateaus and cliffs.

Read the full lesson

Lesson 5

Climatic diagrams and the wind rose

Station X (made-up data for practice)
MonthMean temperature (°C)Rainfall (mm)
Jan2420
Feb2510
Mar2810
Apr3120
May3350
Jun3250
Jul3180
Aug30110
Sep29120
Oct28260
Nov26300
Dec24120

Drawing a wind rose

  1. Choose a scale For example 1 cm = 10% of days.
  2. Draw the centre circle Write the calm percentage inside it.
  3. Mark directions N at 0°, NE 45°, E 90°, SE 135°, S 180°, SW 225°, W 270°, NW 315°.
  4. Draw the bars From the circle outwards, length = percentage × scale.
  5. Label Directions, scale, calm value and title.

Wind rose bars point to where the wind comes FROM; the longest bar is the prevailing wind.

Key takeaways: temperature is drawn as line graphs, rainfall as bars, and both together in a combined diagram with two vertical scales. A wind rose shows the percentage of days the wind blows from each direction, with calm in the centre; its longest bar is the prevailing wind, which runways, pilots, sailors and architects use.

Read the full lesson

Privacy · Terms · Refunds · Delivery