Revision notes

Unit 4 Lithosphere – Exogenic Processes: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Exogenic processes and weathering

Types of weathering

  • Physical (disintegration)
    • Thermal: granular and block disintegration
    • Frost wedging
    • Exfoliation (onion weathering)
  • Chemical (decomposition)
    • Solution
    • Oxidation
    • Hydrolysis
    • Carbonation
    • Hydration
  • Biological
    • Burrowing animals
    • Plant roots
    • Human activities
Five chemical weathering processes
ProcessWhat happensExample
SolutionSoluble minerals dissolve in water and are washed awaySalts removed from rock; can begin caves
OxidationOxygen with water reacts with iron in rock, weakening itReddish rusty stains on rocks, like rusting of iron
HydrolysisMinerals react with water to form new insoluble clay mineralsFeldspar in granite turning to clay
CarbonationWater and carbon dioxide form weak carbonic acid, which attacks minerals such as calciteLimestone dissolved to form caves
HydrationWater is absorbed into a mineral's structure, increasing its volumeAnhydrite changing to gypsum

Physical weathering breaks rock (same minerals, smaller pieces). Chemical weathering changes rock (new minerals). Weathering happens in place; erosion carries the pieces away.

Key takeaways: exogenic forces wear the land down through weathering, mass wasting and erosion by gradational agents; physical weathering includes thermal weathering, frost wedging and exfoliation; chemical weathering includes solution, oxidation, hydrolysis, carbonation and hydration; animals, plants and people cause biological weathering.

Read the full lesson

Lesson 2

Mass wasting and the gradational processes

Kinds of mass wasting

  • Falls
    • Rock fall; debris piles up as talus
  • Slides
    • Rock slide
    • Landslide
    • Slump (rotational)
    • Debris slide
  • Flows
    • Earth flow
    • Mudflow (lahar on a volcano)
    • Debris avalanche
  • Very slow
    • Soil creep

How gradation levels the land

  1. Weathering Rock loosened in place
  2. Mass wasting Gravity moves debris downslope
  3. Erosion and transport (degradation) Agents carry material away from high ground
  4. Deposition (aggradation) Material fills valleys, plains and sea floors

Fall = drops, slide = slips on a surface, flow = moves like a liquid, creep = so slow you see only tilted poles.

Key takeaways: mass wasting is gravity-driven movement classified by material and motion; falls, slides, slumps, flows and creep differ in speed and water content; earthquakes, heavy rain and undercutting trigger them; gradation combines degradation and aggradation.

Read the full lesson

Lesson 3

The work of rivers and fluvial landforms

How a river erodes and transports
ErosionMeaningTransportMeaning
Hydraulic actionForce of moving water breaks rockTractionLarge boulders and pebbles rolled and dragged along the bed
Corrasion (abrasion)Load carried by the river grinds the bed and banksSaltationFragments bounce along the bed
Corrosion (solution)Water dissolves soluble mineralsSuspensionFine sand, silt and mud held up in the water
AttritionFragments knock against each other and become smaller and rounderSolutionDissolved minerals carried in the water

From source to mouth

  1. Upper (youthful, mountain) stage Steep slope, high velocity; vertical erosion dominates; V-shaped valleys. Terms: source, tributary, confluence, water divide
  2. Middle (mature) stage Moderate slope, greater volume; lateral erosion widens the valley; meanders form
  3. Lower (old) stage Gentle slope, broad flat valley; deposition dominates; distributaries, delta, mouth
Types of delta
TypeFeatureExample given in the textbook
Arcuate (fan-shaped)Curved, convex margin facing the seaNile, Ganga
EstuarineFormed along the sides of a submerged river mouthSeine, France
Bird's foot (finger)Fine deposits; long fingers of land along distributariesMississippi, USA
CuspateTooth-shaped; one channel deposits on both sidesTiber, Italy
LacustrineBuilt into a lakeDeltas in lakes
TruncatedCut back by waves and currentsEroded, dissected deltas
AbandonedLeft behind when the river shifts its mouthYellow River (China); western Ganga delta of the Hooghly

Upper course cuts down (V-valley, gorge, falls); middle course cuts sideways (meanders); lower course builds up (flood plain, levees, delta).

Key takeaways: rivers erode by hydraulic action, corrasion, corrosion and attrition and carry load by traction, saltation, suspension and solution; the upper stage erodes downward, the middle sideways and the lower deposits; landforms run from gorges and waterfalls to meanders, oxbow lakes, levees, flood plains, estuaries and deltas.

Read the full lesson

Lesson 4

Glaciers and karst (groundwater) landforms

Types of glacier
TypeDescriptionExample
Continental glacier (ice sheet)Vast sheet of ice covering a landmass in polar regions; edges breaking into the sea form icebergsAntarctica, Greenland
Ice capA smaller dome of ice and snow covering a highland areaSvartisen, northern Norway
Mountain or valley (Alpine) glacierTongue of ice flowing down a mountain valley; piedmont glaciers spread out at the foot of mountainsHigh Himalaya, Alps

Glacial landforms

  • Erosional
    • U-shaped valley
    • Hanging valley
    • Cirque and tarn
    • Arête and horn
    • Fjord, nunatak
  • Depositional
    • Moraines: lateral, medial, ground, terminal, recessional
    • Outwash plain
    • Esker
    • Drumlin
    • Kame

Stalactites hold tight to the ceiling; stalagmites might reach it from the ground.

Key takeaways: glaciers form above the snow line and are continental, ice caps or valley glaciers; they erode by plucking and abrasion, making U-shaped valleys, cirques, arêtes, horns and fjords, and deposit moraines, eskers, drumlins and outwash plains; groundwater in limestone forms lappies, sinkholes, uvalas, poljes and caves with stalactites, stalagmites and pillars.

Read the full lesson

Lesson 5

Landforms made by wind and by sea waves

Two kinds of sand dune

  • Barchan
    • Crescent-shaped
    • Horns point downwind (leeward)
    • Forms where sand is limited and wind direction steady
    • The textbook says it may exceed 27 m in height
  • Seif
    • Long, narrow ridge of sand
    • Lies parallel to the prevailing wind
    • Can run for several kilometres
    • Corridors between ridges are swept clear
Terms used for a coast
TermMeaning
Sea shoreZone between high tide and low tide
ShorelineBoundary between land and water at a given time
CoastlineBoundary where land meets sea
ForeshorePart of the beach worked by waves in normal weather
BackshoreBeach from the limit of storm waves to the cliff base
OffshoreShallow zone of the continental shelf
SwashWater of a wave rushing up the beach

How a headland is worn back

  1. Sea cliff Steep rock face rising from the sea; a flat wave-cut platform forms at its foot
  2. Sea cave Waves hollow out a weakness such as a joint or fault
  3. Blowhole Pressure opens a hole in the cave roof; spray spouts out
  4. Arch Caves on both sides meet and cut right through
  5. Stack The arch roof collapses, leaving a rock pillar in the sea
  6. Stump The stack is worn down to a low remnant

Cave, arch, stack, stump: a headland's life story. Spit joins land at one end; tombolo joins land to an island.

Key takeaways: wind erodes by deflation, abrasion and attrition, forming deflation hollows, oases, mushroom rocks, yardangs and zeugen, and deposits barchans, seifs and loess; waves erode by abrasion, hydraulic action, corrosion and attrition, forming cliffs, platforms, caves, blowholes, arches, stacks and stumps, and deposit beaches, bars, lagoons, spits and tombolos.

Read the full lesson

Privacy · Terms · Refunds · Delivery