• Practice
  • About 35 min
  • 15 practice questions

Final self-assessment: Nature of Physical World and Measurement

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 35 minutes, with a rough sheet for the numericals and without looking back at the lessons. The questions mix all five lessons and are a little harder than the lesson checks. Check your answers only after you finish, and read every explanation.

Final self-assessment

  1. 1. Explaining the temperature and pressure of a gas through the motion of its molecules is an example of:

    1. unification
    2. reductionism
    3. falsification
    4. triangulation
    Show answer

    Answer: B. Reductionism explains a macroscopic system (a bulk gas) through its microscopic parts (molecules), as kinetic theory does.

  2. 2. Which unit is NOT an SI base unit?

    1. candela
    2. mole
    3. newton
    4. kelvin
    Show answer

    Answer: C. The newton is a derived unit (1 N = 1 kg m s⁻²). Candela, mole and kelvin are among the seven base units.

  3. 3. A patch of area 0.36 m² on the surface of a sphere of radius 0.60 m subtends at the centre a solid angle of:

    1. 0.60 sr
    2. 1.0 sr
    3. 0.36 sr
    4. 2.0 sr
    Show answer

    Answer: B. Ω = area/radius² = 0.36 m² / (0.60 m)² = 0.36/0.36 = 1.0 sr.

  4. 4. A screw gauge has LC 0.01 mm and a zero error of −0.02 mm. With PSR = 2 mm and HSC = 45, the corrected reading is:

    1. 2.43 mm
    2. 2.45 mm
    3. 2.47 mm
    4. 2.25 mm
    Show answer

    Answer: C. Observed = 2 + 45 × 0.01 = 2.45 mm. Corrected = observed − zero error = 2.45 − (−0.02) = 2.47 mm.

  5. 5. An object at a distance of 3.0 × 10⁸ m subtends an angle of 0.010 rad. Its diameter is:

    1. 3.0 × 10⁶ m
    2. 3.0 × 10¹⁰ m
    3. 3.0 × 10⁸ m
    4. 3.0 × 10⁴ m
    Show answer

    Answer: A. For small angles the diameter is approximately an arc: D = xθ = 3.0 × 10⁸ × 0.010 = 3.0 × 10⁶ m.

  6. 6. A SONAR pulse returns from the sea bed 2.0 s after it is sent. If sound travels at 1500 m s⁻¹ in sea water, the depth is:

    1. 3000 m
    2. 750 m
    3. 6000 m
    4. 1500 m
    Show answer

    Answer: D. The pulse travels down and back, so d = vt/2 = 1500 × 2.0 / 2 = 1500 m.

  7. 7. Assertion (A): Averaging many readings removes the error caused by a wrongly calibrated instrument. Reason (R): Random errors scatter readings on both sides of the true value.

    1. Both A and R are true, and R explains A.
    2. Both A and R are true, but R does not explain A.
    3. A is true, but R is false.
    4. A is false, but R is true.
    Show answer

    Answer: D. A wrongly calibrated instrument causes a systematic error that shifts every reading the same way, so averaging does not remove it: A is false. R is a true statement about random errors, which averaging does reduce.

  8. 8. Readings of a length are 5.2 cm, 5.4 cm, 5.3 cm and 5.3 cm. The percentage error (using the mean absolute error) is about:

    1. 0.5%
    2. 1.0%
    3. 0.9%
    4. 2.0%
    Show answer

    Answer: C. Mean = 21.2/4 = 5.3 cm. Absolute errors: 0.1, 0.1, 0.0, 0.0; mean absolute error = 0.2/4 = 0.05 cm. Percentage error = 0.05/5.3 × 100% ≈ 0.94%, about 0.9%.

  9. 9. A wire has V = (10.0 ± 0.2) V across it and I = (2.0 ± 0.1) A through it. Its resistance R = V/I is:

    1. (5.0 ± 0.35) Ω
    2. (5.0 ± 0.3) Ω
    3. (5.0 ± 0.1) Ω
    4. (5.0 ± 0.05) Ω
    Show answer

    Answer: A. R = 10.0/2.0 = 5.0 Ω. Fractional error = 0.2/10.0 + 0.1/2.0 = 0.02 + 0.05 = 0.07. ΔR = 0.07 × 5.0 = 0.35 Ω.

  10. 10. If Q = a³b²/√c and the percentage errors in a, b and c are 1%, 2% and 2%, the percentage error in Q is:

    1. 5%
    2. 9%
    3. 8%
    4. 7%
    Show answer

    Answer: C. ΔQ/Q = 3(1%) + 2(2%) + ½(2%) = 3% + 4% + 1% = 8%.

  11. 11. The radius of a circle is 2.15 cm. Its area πr², with the correct number of significant figures, is:

    1. 14.5 cm²
    2. 14.52 cm²
    3. 14.522 cm²
    4. 15 cm²
    Show answer

    Answer: A. πr² = 3.14159 × 4.6225 = 14.522 cm². The radius has three significant figures (π is treated as exact), so the area is given to three: 14.5 cm².

  12. 12. Which number has the greatest number of significant figures?

    1. 0.000420
    2. 4.20 × 10⁵
    3. 4200
    4. 42.010
    Show answer

    Answer: D. 0.000420 has 3; 4.20 × 10⁵ has 3; 4200 has 2 (no decimal point, trailing zeros not significant); 42.010 has 5.

  13. 13. The velocity of a particle is v = at + b/(t + c), where t is time. The dimensions of b are:

    1. [LT⁻²]
    2. [L]
    3. [LT⁻¹]
    4. [T]
    Show answer

    Answer: B. c is added to t, so [c] = [T]. Then b/(t + c) must have the dimensions of velocity: [b] = [LT⁻¹][T] = [L].

  14. 14. The value of G is 6.67 × 10⁻¹¹ N m² kg⁻² in SI. In c.g.s. units it is:

    1. 6.67 × 10⁻¹⁴
    2. 6.67 × 10⁻⁹
    3. 6.67 × 10⁻⁸
    4. 6.67 × 10⁻⁵
    Show answer

    Answer: C. [G] = [M⁻¹L³T⁻²]. n₂ = 6.67 × 10⁻¹¹ × (1 kg/1 g)⁻¹ × (1 m/1 cm)³ = 6.67 × 10⁻¹¹ × 10⁻³ × 10⁶ = 6.67 × 10⁻⁸ dyne cm² g⁻².

  15. 15. Which of these can dimensional analysis do?

    1. Find the value of the constant 2π in T = 2π√(l/g)
    2. Show that F = mv²/r is consistent in dimensions
    3. Decide whether torque is a vector
    4. Derive a relation containing an exponential function
    Show answer

    Answer: B. Dimensional analysis checks consistency: [mv²/r] = [M][L²T⁻²]/[L] = [MLT⁻²], the dimension of force. It cannot find dimensionless constants, decide vector or scalar, or handle exponential relations.

Revisit the lessons for the questions you missed: questions 1-3, lesson 1 (physics, quantities, SI units and angles); questions 4-6, lesson 2 (measuring length, mass and time); questions 7-8, lesson 3 (accuracy, precision and errors); questions 9-12, lesson 4 (propagation of errors and significant figures); questions 13-15, lesson 5 (dimensional analysis).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery