• Practice
  • About 22 min
  • 5 practice questions

Displacement, velocity, acceleration, period and phase in SHM

Write y = A sin(ωt + φ₀) for SHM, derive its velocity and acceleration, use T = 2π/ω and f = 1/T, and work with phase, epoch and phase differences.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Derive y = A sin ωt, v = Aω cos ωt = ω√(A² − y²) and a = −ω²y for SHM.
  • State where the speed and acceleration are greatest and where they are zero.
  • Relate time period, frequency and angular frequency: T = 2π/ω, f = 1/T, ω = 2πf.
  • Find amplitude, frequency, period and epoch from an SHM equation and work out phase differences.

The reference circle of lesson 1 gives us the exact equations of SHM. With them we can find the position, velocity and acceleration of an oscillating body at any instant, and compare two oscillations through their phases.

Displacement

Let P move on a circle of radius A with angular velocity ω, starting on the horizontal axis at t = 0. In the right triangle OPN, sin θ = ON/OP, with θ = ωt, ON = y and OP = A. So the displacement of the projection N from the mean position is y = A sin ωt. Its largest value, reached when sin ωt = 1, is A: this maximum displacement is the amplitude. In SHM the amplitude stays constant.

Velocity

Velocity is the rate of change of displacement: v = dy/dt = Aω cos ωt. Using cos ωt = √(1 − sin² ωt) and sin ωt = y/A: v = Aω√(1 − y²/A²), so

v = ω√(A² − y²); a = d²y/dt² = −ω²A sin ωt = −ω²y

At the mean position (y = 0) the speed is greatest, v_max = Aω. At the extreme positions (y = ±A) the velocity is zero. Differentiating again gives the acceleration a = −Aω² sin ωt = −ω²y: zero at the mean position and greatest in size, Aω², at the extremes, always pointing towards the mean position. The equation d²y/dt² = −ω²y is the differential equation of SHM.

One cycle of SHM at a glance
Time t0T/4T/23T/4T
Phase ωt0π/2π3π/22π
Displacement y = A sin ωt0A0−A0
Velocity v = Aω cos ωtAω0−Aω0Aω
Acceleration a = −Aω² sin ωt0−Aω²0Aω²0

Mean position versus extreme position

  • Mean position (y = 0)
    • Speed greatest: Aω
    • Acceleration zero
    • Restoring force zero
  • Extreme position (y = ±A)
    • Velocity zero
    • Acceleration greatest: Aω²
    • Directed towards the mean position

Time period, frequency and angular frequency

The time period T is the time for one complete oscillation. In one oscillation the reference particle turns through 2π, so ωT = 2π, giving T = 2π/ω. The displacement can be written y = A sin(2πt/T); replacing t by t + T adds 2π to the angle and leaves y unchanged, which is what makes y(t) periodic. The frequency f is the number of oscillations per second, f = 1/T, measured in hertz (Hz = s⁻¹). The angular frequency is ω = 2πf, measured in rad s⁻¹.

Phase, epoch and phase difference

In general the displacement is written y = A sin(ωt + φ₀). The angle φ = ωt + φ₀ is the phase: it fixes both the position and the direction of motion of the particle at that instant. Its value at t = 0, φ₀, is the epoch or initial phase. For two SHMs of the same ω, y₁ = A sin(ωt + φ₁) and y₂ = A sin(ωt + φ₂), the phase difference is Δφ = φ₂ − φ₁, the same at every instant.

Writing v and a as sine functions shows their phases: v = Aω cos ωt = Aω sin(ωt + π/2) and a = −Aω² sin ωt = Aω² sin(ωt + π). So velocity leads displacement by π/2 (90°), acceleration leads velocity by π/2, and acceleration and displacement differ in phase by π (180°): they are always opposite.

Worked example 1: reading an SHM equation

For y = 0.05 sin(10πt + π/6), with y in metres and t in seconds, find the amplitude, angular frequency, frequency, period, epoch, maximum speed and maximum acceleration. Comparing with y = A sin(ωt + φ₀): A = 0.05 m; ω = 10π rad s⁻¹; f = ω/2π = 5 Hz; T = 1/f = 0.2 s; φ₀ = π/6 rad. Maximum speed: Aω = 0.05 × 10π ≈ 1.57 m s⁻¹. Maximum acceleration: Aω² = 0.05 × (10π)² = 0.05 × 987 ≈ 49.3 m s⁻². Position at t = 0: y = 0.05 sin(π/6) = 0.05 × 0.5 = 0.025 m.

Worked example 2: velocity and acceleration at a point

A particle in SHM has amplitude 0.10 m and angular frequency 4.0 rad s⁻¹. Find its speed and acceleration when it is 0.06 m from the mean position. Speed: v = ω√(A² − y²) = 4.0 × √(0.0100 − 0.0036) = 4.0 × √0.0064 = 4.0 × 0.08 = 0.32 m s⁻¹. Acceleration: a = −ω²y = −16 × 0.06 = −0.96 m s⁻², i.e. 0.96 m s⁻² directed towards the mean position.

Worked example 3: a pulse in beats per minute

A patient's heartbeat has a period of 0.75 s. Express the rate in beats per minute. Step 1: f = 1/T = 1/0.75 ≈ 1.333 s⁻¹. Step 2: one minute is 60 s, so f = 1.333 × 60 = 80 beats per minute.

Worked example 4: finding the period from two positions

A particle in SHM has speed 3.0 m s⁻¹ at 4.0 cm from the mean position and 4.0 m s⁻¹ at 3.0 cm (made-up values). Find ω, A and T. Step 1: v² = ω²(A² − y²) at both points: 9.0 = ω²(A² − 0.0016) and 16 = ω²(A² − 0.0009). Step 2: subtracting, 16 − 9.0 = ω²(0.0016 − 0.0009), so 7.0 = ω² × 0.0007 and ω² = 1.0 × 10⁴, ω = 100 rad s⁻¹. Step 3: 9.0 = 10⁴(A² − 0.0016) gives A² = 0.0009 + 0.0016 = 0.0025, A = 0.05 m = 5.0 cm. Step 4: T = 2π/ω = 2π/100 ≈ 0.063 s.

Key takeaways

  • y = A sin(ωt + φ₀); v = ω√(A² − y²); a = −ω²y.
  • Speed is greatest (Aω) at the mean position; acceleration is greatest (Aω²) at the extremes.
  • T = 2π/ω, f = 1/T, ω = 2πf.
  • Velocity leads displacement by π/2; acceleration is opposite in phase (π) to displacement.

Check your understanding

  1. 1. For y = 0.2 sin(4πt + 0.5) (SI units), the time period is:

    1. 0.5 s
    2. 4π s
    3. 2 s
    4. 0.25 s
    Show answer

    Answer: A. ω = 4π rad s⁻¹, so T = 2π/ω = 2π/4π = 0.5 s. The frequency is 2 Hz, which is easy to confuse with the period.

  2. 2. A particle in SHM has amplitude 5.0 cm and angular frequency 2.0 rad s⁻¹. Its speed when 3.0 cm from the mean position is:

    1. 10 cm s⁻¹
    2. 6.0 cm s⁻¹
    3. 4.0 cm s⁻¹
    4. 8.0 cm s⁻¹
    Show answer

    Answer: D. v = ω√(A² − y²) = 2.0 × √(25 − 9) = 2.0 × √16 = 2.0 × 4.0 = 8.0 cm s⁻¹. 10 cm s⁻¹ is the maximum speed Aω, reached only at the mean position.

  3. 3. At the extreme position of a particle executing SHM:

    1. velocity and acceleration are both greatest
    2. velocity is zero and acceleration is greatest
    3. velocity is greatest and acceleration is zero
    4. velocity and acceleration are both zero
    Show answer

    Answer: B. At y = ±A, v = ω√(A² − A²) = 0, while a = −ω²y has its largest size ω²A. The particle stops and is pulled back hardest there.

  4. 4. The phase difference between the displacement and the acceleration of a particle in SHM is:

    1. π/2
    2. zero
    3. π
    4. 2π
    Show answer

    Answer: C. a = −ω²y, so a = Aω² sin(ωt + π) when y = A sin ωt. The two are always opposite in direction: a phase difference of π (180°).

  5. 5. A particle in SHM has a maximum speed of 2.0 m s⁻¹ and a maximum acceleration of 8.0 m s⁻². Its amplitude is:

    1. 0.50 m
    2. 4.0 m
    3. 0.25 m
    4. 2.0 m
    Show answer

    Answer: A. v_max = Aω = 2.0 and a_max = Aω² = 8.0. Dividing, ω = 8.0/2.0 = 4.0 rad s⁻¹. Then A = v_max/ω = 2.0/4.0 = 0.50 m.

Privacy · Terms · Refunds · Delivery