- Practice
- About 22 min
- 5 practice questions
Energy in SHM and free, damped, maintained and forced oscillations
Derive the potential, kinetic and total energy of a harmonic oscillator, show that the total stays constant, and describe free, damped, maintained and forced oscillations and resonance.
If something looks wrong, please tell us.
By the end of this lesson you can
- Derive U = ½kx² = ½mω²x² and KE = ½mω²(A² − x²) for SHM.
- Show that the total energy E = ½mω²A² is constant and find the amplitude from it.
- Find where kinetic and potential energy are equal.
- Distinguish free, damped, maintained and forced oscillations, and explain resonance with examples.
As a pendulum swings, its energy changes form all the time: all kinetic at the bottom, all potential at the ends. In an ideal oscillator the total never changes. In real oscillators friction drains energy away, unless something supplies it, and that leads to damping, maintained and forced vibrations and resonance.
Potential energy
The restoring force F = −kx is a conservative force, so it has a potential energy U with F = −dU/dx. Then dU = kx dx, and integrating from 0 to x: U(x) = ½kx². Since k = mω², U = ½mω²x², and with x = A sin ωt, U(t) = ½mω²A² sin² ωt. U is zero at the mean position and greatest, ½mω²A², at the extremes.
Kinetic energy
The velocity is v = Aω cos ωt = ω√(A² − x²). So KE = ½mv² = ½mω²(A² − x²) = ½mω²A² cos² ωt. KE is greatest, ½mω²A², at the mean position and zero at the extremes. Both U and KE are always positive, and each repeats twice in every period of the motion.
Total energy
E = KE + U = ½mω²(A² − x²) + ½mω²x². The x² terms cancel, leaving
E = ½mω²A² = ½kA² = constant; hence A = √(2E/k) = √(2E/(mω²))
Using sin² ωt + cos² ωt = 1 on the time forms gives the same result. This is the law of conservation of energy for the oscillator: energy keeps passing between kinetic and potential forms while the total stays fixed. In terms of linear momentum p = mv, E = p²/2m + ½mω²x².
Energy changes in one swing of an ideal oscillator
- Extreme position x = +A All potential: U = ½kA², KE = 0
- Moving to the mean position U turns into KE
- Mean position x = 0 All kinetic: KE = ½kA², U = 0
- Extreme position x = −A All potential again; the motion reverses
Then back to step 1: Extreme position x = +A
Worked example 1: energies at a point
A 0.20 kg body performs SHM with amplitude 0.10 m and ω = 10 rad s⁻¹. Find the total energy, and the potential and kinetic energies at x = 0.05 m. Total: E = ½mω²A² = 0.5 × 0.20 × 100 × 0.010 = 0.10 J. Potential at 0.05 m: U = ½mω²x² = 0.5 × 0.20 × 100 × 0.0025 = 0.025 J. Kinetic: KE = E − U = 0.10 − 0.025 = 0.075 J. At half the amplitude, three quarters of the energy is kinetic.
Worked example 2: where KE equals PE
At what displacement are the kinetic and potential energies equal? Set ½mω²(A² − x²) = ½mω²x²: A² − x² = x², so 2x² = A² and x = ±A/√2 ≈ ±0.707A. For the body of example 1, this is at ±0.071 m, where each energy is 0.050 J.
Worked example 3: amplitude from energy, and a block meeting a spring
(a) An oscillator with k = 400 N m⁻¹ has total energy 2.0 J. Its amplitude is A = √(2E/k) = √(4.0/400) = √0.010 = 0.10 m. (b) A 0.50 kg block sliding at 2.0 m s⁻¹ on a smooth floor runs into a light spring of constant 800 N m⁻¹. At the greatest compression x the block stops, and its kinetic energy has become elastic potential energy: ½mv² = ½kx², so x = v√(m/k) = 2.0 × √(0.50/800) = 2.0 × 0.025 = 0.050 m.
Types of oscillations
Free oscillations. An oscillator displaced and released vibrates at its own natural frequency, with constant amplitude, frequency and energy (in the ideal case). Examples: a struck tuning fork, a plucked stretched string, a simple pendulum, a spring-mass system.
Damped oscillations. In a real medium, friction and air drag remove energy, so the amplitude decreases with time and the oscillation dies out. The energy lost goes to the surroundings. The damping force is proportional to the velocity of the oscillator. The displacement still varies sinusoidally, but within an envelope that shrinks steadily. Examples: a pendulum swinging in air or in oil, electromagnetic oscillations in a tank circuit, and the oscillations of dead-beat and ballistic galvanometers.
Maintained oscillations. A swing stops after a few cycles because of damping, unless someone gives it a push each time. Supplying energy from outside to make up for the loss keeps the amplitude constant: these are maintained oscillations. Example: a tuning fork kept vibrating by an electrically driven circuit powered by a battery.
Forced oscillations. An oscillator driven by an external periodic force vibrates at first with its natural frequency, but soon settles into vibrating at the frequency of the applied force. Example: the sound board of a stringed instrument, made to vibrate by the strings.
Resonance is the special case of forced oscillation in which the frequency of the driving force equals the natural frequency of the driven body. The amplitude then builds up with every cycle and becomes very large. A glass can be shattered by a sustained note at its natural frequency; a radio or television is tuned to a station by adjusting a circuit to resonate with that station's frequency; and soldiers break step while crossing a bridge so that their marching cannot set it into resonant vibration.
Four types of oscillation
-
Free
- Natural frequency
- Constant amplitude (ideal)
- No outside energy after release
-
Damped
- Amplitude falls with time
- Energy lost to the medium
- Damping force ∝ velocity
-
Maintained
- Energy supplied to make up losses
- Constant amplitude
- Natural frequency
-
Forced
- Frequency of the driving force
- Resonance when driving frequency = natural frequency
- Large amplitude at resonance
Key takeaways
- U = ½kx², KE = ½k(A² − x²), E = ½kA² = ½mω²A², constant.
- KE = U at x = ±A/√2; A = √(2E/k).
- Damping reduces amplitude; maintained oscillations replace the lost energy.
- Forced oscillations follow the driver's frequency; resonance occurs when it equals the natural frequency.
Check your understanding
-
1. A particle in SHM has total energy E. When its displacement is half the amplitude, its kinetic energy is:
- E/2
- E/4
- 3E/4
- E
Show answer
Answer: C. U = ½kx² = ½k(A/2)² = ¼ × ½kA² = E/4. So KE = E − E/4 = 3E/4.
-
2. If the amplitude of a harmonic oscillator is doubled (same k), its total energy:
- becomes four times
- doubles
- stays the same
- halves
Show answer
Answer: A. E = ½kA² ∝ A². Doubling A multiplies E by 2² = 4.
-
3. An oscillator of spring constant 200 N m⁻¹ has a total energy of 0.25 J. Its amplitude is:
- 0.25 m
- 0.025 m
- 0.0025 m
- 0.050 m
Show answer
Answer: D. A = √(2E/k) = √(2 × 0.25/200) = √(0.0025) = 0.050 m. The value 0.0025 is A², before taking the square root.
-
4. A tuning fork is kept vibrating at a constant amplitude by an electrically driven circuit. Its oscillations are:
- damped
- maintained
- free
- non-periodic
Show answer
Answer: B. Energy is supplied from outside to make up for the energy lost to damping, so the amplitude stays constant. These are maintained oscillations.
-
5. Soldiers are asked to break step while crossing a bridge mainly to avoid:
- damping of the bridge
- resonance of the bridge
- free oscillations of the soldiers
- a fall in the bridge's natural frequency
Show answer
Answer: B. If the frequency of their marching matched a natural frequency of the bridge, the forced vibration would become resonant and its amplitude could grow dangerously large.
Sign in to keep track of the lessons you finish.