Revision notes

Unit 10 Oscillations: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Periodic motion, oscillations and simple harmonic motion

Kinds of motion

  • Non-periodic
    • Does not repeat at regular intervals
    • Earthquake, falling leaf, drifting cloud
  • Periodic, not oscillatory
    • Repeats, but not to and fro
    • Earth around the Sun, hands of a clock
  • Oscillatory
    • Periodic and to and fro about a mean position
    • Pendulum, heartbeat, insect wings
  • Simple harmonic
    • Oscillatory with restoring force ∝ displacement
    • Spring-mass system, small swings of a pendulum

F = −k x (k = force constant: force per unit displacement, N m⁻¹)

— Condition for simple harmonic motion

One revolution of P and the motion of its projection N

  1. θ = 0 N at the centre O, moving up fastest
  2. θ = π/2 N at the top, y = +A, momentarily at rest
  3. θ = π N back at O, moving down fastest
  4. θ = 3π/2 N at the bottom, y = −A, momentarily at rest

Then back to step 1: θ = 0

  • Periodic motion repeats after a fixed time; oscillatory motion is periodic to-and-fro motion about a mean position.
  • SHM: acceleration ∝ displacement and directed towards the mean position: a = −ω²x, F = −kx.
  • The restoring force always points towards the equilibrium position.
  • The projection of uniform circular motion on a diameter is SHM; the circle is the reference circle.
Read the full lesson

Lesson 2

Displacement, velocity, acceleration, period and phase in SHM

v = ω√(A² − y²); a = d²y/dt² = −ω²A sin ωt = −ω²y

One cycle of SHM at a glance
Time t0T/4T/23T/4T
Phase ωt0π/2π3π/22π
Displacement y = A sin ωt0A0−A0
Velocity v = Aω cos ωtAω0−Aω0Aω
Acceleration a = −Aω² sin ωt0−Aω²0Aω²0

Mean position versus extreme position

  • Mean position (y = 0)
    • Speed greatest: Aω
    • Acceleration zero
    • Restoring force zero
  • Extreme position (y = ±A)
    • Velocity zero
    • Acceleration greatest: Aω²
    • Directed towards the mean position
  • y = A sin(ωt + φ₀); v = ω√(A² − y²); a = −ω²y.
  • Speed is greatest (Aω) at the mean position; acceleration is greatest (Aω²) at the extremes.
  • T = 2π/ω, f = 1/T, ω = 2πf.
  • Velocity leads displacement by π/2; acceleration is opposite in phase (π) to displacement.
Read the full lesson

Lesson 3

Angular SHM, spring-mass oscillators and combinations of springs

Angular SHM: ω = √(κ/I), f = (1/2π)√(κ/I), T = 2π√(I/κ)

Comparison of linear and angular SHM
Linear SHMAngular SHM
Linear displacement rAngular displacement θ (angle of twist)
Acceleration a = −ω²rAngular acceleration α = −ω²θ
F = ma (inertia factor: mass m)τ = Iα (inertia factor: moment of inertia I)
Restoring force F = −krRestoring torque τ = −κθ
ω = √(k/m)ω = √(κ/I)

Springs in series and in parallel

  • Series
    • Same force in each spring
    • Stretches add: x = x₁ + x₂
    • 1/kₛ = 1/k₁ + 1/k₂
    • Softer than the softest spring; n equal springs: k/n
  • Parallel
    • Same stretch in each spring
    • Forces add: F = F₁ + F₂
    • kₚ = k₁ + k₂
    • Stiffer than the stiffest spring; n equal springs: nk
  • Angular SHM: τ = −κθ, T = 2π√(I/κ).
  • Spring-mass system, horizontal or vertical: T = 2π√(m/k); hanging mass: T = 2π√(l/g).
  • Series: 1/kₛ = Σ 1/kᵢ (softer); parallel: kₚ = Σ kᵢ (stiffer).
  • k ∝ 1/length: half a spring is twice as stiff.
Read the full lesson

Lesson 4

The simple pendulum and the oscillating liquid column

Simple pendulum (small swings): ω = √(g/l), f = (1/2π)√(g/l), T = 2π√(l/g)

Comparing θ and sin θ
θ (degrees)θ (radians)sin θ
50.08730.0872
100.17450.1736
200.34910.3420
300.52360.5000
450.78540.7071

What the period of a simple pendulum depends on

  • Depends on
    • Length: T ∝ √l (law of length)
    • Gravity: T ∝ 1/√g (law of acceleration)
  • Independent of
    • Mass of the bob (an elephant and an ant on the same length swing alike)
    • Amplitude, as long as it is small
SituationEffective gPeriod
Lift accelerating upward at ag + aDecreases: T = 2π√(l/(g + a))
Lift accelerating downward at a (a < g)g − aIncreases: T = 2π√(l/(g − a))
Lift falling freely (a = g)0No oscillation (T becomes infinite)
Lift accelerating downward at a > ga − gPendulum turns upside down, oscillates about the highest point
Car accelerating horizontally at a√(g² + a²)Decreases: T = 2π√(l/√(g² + a²))
  • Restoring force on a bob: mg sin θ; for small θ, sin θ ≈ θ gives SHM.
  • T = 2π√(l/g): T ∝ √l, T ∝ 1/√g, independent of mass and of small amplitude.
  • Heating lengthens the rod: ΔT/T = ½αΔt; replace g by g_eff in lifts and cars.
  • Liquid column of total length l in a U-tube: T = 2π√(l/2g).
Read the full lesson

Lesson 5

Energy in SHM and free, damped, maintained and forced oscillations

E = ½mω²A² = ½kA² = constant; hence A = √(2E/k) = √(2E/(mω²))

— Total energy of a harmonic oscillator

Energy changes in one swing of an ideal oscillator

  1. Extreme position x = +A All potential: U = ½kA², KE = 0
  2. Moving to the mean position U turns into KE
  3. Mean position x = 0 All kinetic: KE = ½kA², U = 0
  4. Extreme position x = −A All potential again; the motion reverses

Then back to step 1: Extreme position x = +A

Four types of oscillation

  • Free
    • Natural frequency
    • Constant amplitude (ideal)
    • No outside energy after release
  • Damped
    • Amplitude falls with time
    • Energy lost to the medium
    • Damping force ∝ velocity
  • Maintained
    • Energy supplied to make up losses
    • Constant amplitude
    • Natural frequency
  • Forced
    • Frequency of the driving force
    • Resonance when driving frequency = natural frequency
    • Large amplitude at resonance
  • U = ½kx², KE = ½k(A² − x²), E = ½kA² = ½mω²A², constant.
  • KE = U at x = ±A/√2; A = √(2E/k).
  • Damping reduces amplitude; maintained oscillations replace the lost energy.
  • Forced oscillations follow the driver's frequency; resonance occurs when it equals the natural frequency.
Read the full lesson

Privacy · Terms · Refunds · Delivery