• Practice
  • About 24 min
  • 5 practice questions

Reflection of sound, progressive waves, interference and beats

Apply the laws of reflection to sound and its uses (echo, SONAR, stethoscope, reverberation), write and read the equation of a progressive wave, and explain superposition, interference and beats.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the laws of reflection of sound and describe reflection from plane and curved surfaces.
  • Explain echo, SONAR, the stethoscope and reverberation, and classify sound by frequency.
  • Use y = A sin(kx − ωt) for a progressive wave and distinguish particle velocity from wave velocity.
  • Apply the superposition principle to interference (path and phase difference) and to beats.

Sound bounces off hard surfaces, travels as a continuous wave, and adds up with other sound waves. These three behaviours explain echoes and halls with good acoustics, the mathematics of a travelling wave, and the familiar throbbing of two slightly mistuned instruments.

Reflection of sound

When sound meets a hard, rigid surface it can be reflected back into the first medium. Sound obeys the laws of reflection: (i) the angle of incidence equals the angle of reflection; (ii) the incident wave, the reflected wave and the normal at the point of incidence lie in the same plane. Reflection from a flat surface like a mirror (specular reflection) occurs only when the wavelength is smaller than the size of the reflecting surface and of its irregularities.

Plane surface: spherical wavefronts from a point source are reflected as spherical wavefronts whose centre lies behind the wall, as if they came from an image (virtual) source. Convex surface: the reflected sound spreads out and weakens. Concave surface: the reflected sound converges to a point and is strengthened; parabolic reflectors are used in highly directional microphones. In a large hall, a concave sound board behind the speaker sends the sound towards the audience and spreads it evenly through the hall.

Applications of the reflection of sound

  • Stethoscope: sounds from the heart or lungs, picked up by the sensitive diaphragm of the chest piece, travel along the rubber tube to the ear pieces by multiple reflections.
  • Echo: a repetition of sound caused by reflection from a wall, cliff or mountain. Two sounds are heard separately only if they arrive at least about 0.1 s apart (persistence of hearing). With sound at 344 m s⁻¹ (20 °C), 2d = 344 × 0.1, so the reflector must be at least about 17.2 m away.
  • SONAR (SOund NAvigation and Ranging): sound pulses reflected under water locate objects and measure depths. Bats and dolphins use the same principle.
  • Reverberation: in a closed room, repeated reflections make sound persist after the source stops. The time it persists is the reverberation time; halls are designed for a suitable reverberation time.
Classification of sound by frequency
RangeFrequencyNotes from the textbook
InfrasonicBelow 20 HzProduced in earthquakes; not heard by humans
Audible20 Hz to 20 kHzHeard by humans
UltrasonicAbove 20 kHzNot heard by humans; bats produce and hear them

A body moving faster than sound moves at supersonic speed; the Mach number is the ratio of its speed to the speed of sound.

Progressive (travelling) waves

A continuous wave moving through a medium is a progressive or travelling wave. If a pulse of shape y = f(x) at t = 0 moves to the right at speed v without changing shape, then at time t its displacement is y = f(x − vt); a pulse moving left is y = f(x + vt). Both satisfy the one-dimensional wave equation ∂²y/∂x² = (1/v²) ∂²y/∂t². For a harmonic wave the argument must be dimensionless, so we write

y(x, t) = A sin(kx − ωt); phase velocity v = ω/k = fλ; particle velocity v_p = ∂y/∂t = −Aω cos(kx − ωt)

A space (spatial) graph fixes t and plots y against x: it repeats every λ = 2π/k. A time (temporal) graph fixes x and plots y against t: it repeats every T = 2π/ω. The wave velocity is found by following a point of constant phase: kx − ωt = constant gives Δx/Δt = ω/k. The particle velocity is the rate at which one particle's displacement changes; it varies between +Aω and −Aω and is quite different from the wave velocity.

Characteristics of a progressive wave: every particle vibrates with the same amplitude; no particle is permanently at rest (each stops only momentarily at its extremes); all particles pass the mean position with the same maximum speed; particles a whole number of wavelengths apart move identically; and the wave carries energy forward.

The principle of superposition

Two pulses sent towards each other along a string pass through each other and come out unchanged. Where they overlap, the resultant displacement is the (vector) sum of the individual displacements: y = y₁ + y₂. This holds because the wave equation is linear, so a sum of solutions is again a solution. Waves that obey it (small amplitude compared with wavelength) are called linear waves. Superposition explains interference, beats and standing waves.

Interference

Let two waves of the same frequency with a constant phase difference φ (coherent waves) overlap: y₁ = A₁ sin(kx − ωt), y₂ = A₂ sin(kx − ωt + φ). Expanding and collecting terms gives y = A sin(kx − ωt + θ) with A² = A₁² + A₂² + 2A₁A₂ cos φ. Since intensity ∝ A², I = I₁ + I₂ + 2√(I₁I₂) cos φ.

Constructive and destructive interference

  • Constructive
    • Phase difference φ = 0, 2π, 4π, ...
    • Path difference = nλ
    • A = A₁ + A₂
    • I_max = (√I₁ + √I₂)²
  • Destructive
    • Phase difference φ = π, 3π, 5π, ...
    • Path difference = (odd number) × λ/2
    • A = |A₁ − A₂|
    • I_min = (√I₁ − √I₂)²

Phase difference and path difference are related by Δφ = (2π/λ) × Δr. In a sliding-tube interference apparatus, sound from a speaker splits into two paths and recombines at a receiver: as one path is lengthened, the sound at the receiver alternately becomes loud and faint.

Beats

When two sounds of slightly different frequencies f₁ and f₂ overlap, they drift in and out of step, so the loudness rises and falls periodically. These periodic maxima are beats. Adding y = A sin 2πf₁t + A sin 2πf₂t gives a wave of the average frequency (f₁ + f₂)/2 whose amplitude 2A cos[2π(f₁ − f₂)t/2] varies slowly. Loud moments come every 1/|f₁ − f₂| seconds, so

Beat frequency = |f₁ − f₂| beats per second

Worked example 1: echo and SONAR

(a) A girl claps and hears the echo from a hill 3.0 s later; sound travels at 340 m s⁻¹. The sound goes to the hill and back, so 2d = 340 × 3.0 = 1020 m and d = 510 m. (b) A ship's SONAR pulse returns from the sea bed after 1.2 s; sound in sea water travels at about 1530 m s⁻¹. Depth = (1530 × 1.2)/2 = 918 m.

Worked example 2: reading a progressive wave

For y = 0.02 sin(4πx − 200πt) (SI units), find A, λ, f, the wave speed and the greatest particle speed. Step 1: A = 0.02 m. Step 2: k = 4π, so λ = 2π/k = 0.50 m. Step 3: ω = 200π, so f = 100 Hz. Step 4: v = ω/k = 200π/4π = 50 m s⁻¹ (check: fλ = 100 × 0.50 = 50). Step 5: greatest particle speed = Aω = 0.02 × 200π ≈ 12.6 m s⁻¹, much less than the wave speed. The minus sign between kx and ωt shows the wave travels in the +x direction.

Worked example 3: interference and beats

(a) Two coherent sound waves of amplitudes 3 units and 4 units meet. Greatest amplitude = 3 + 4 = 7; least = 4 − 3 = 1. So I_max : I_min = 49 : 1. (b) The path difference between them at a point is 0.25 m and λ = 1.0 m. Δφ = (2π/1.0) × 0.25 = π/2. (c) Tuning forks of 256 Hz and 260 Hz sound together: beats = 260 − 256 = 4 per second.

Key takeaways

  • Sound obeys the laws of reflection; concave surfaces focus it, convex surfaces spread it.
  • Echo needs at least about 0.1 s delay (about 17 m to the reflector); SONAR measures distance by timing reflected pulses.
  • y = A sin(kx − ωt) travels in +x at v = ω/k; particle velocity is ∂y/∂t, a different thing.
  • Interference: A² = A₁² + A₂² + 2A₁A₂ cos φ, Δφ = 2πΔr/λ; beats = |f₁ − f₂|.

Check your understanding

  1. 1. A man hears the echo of his shout from a cliff 2.0 s later. If sound travels at 340 m s⁻¹, the cliff is:

    1. 680 m away
    2. 170 m away
    3. 340 m away
    4. 1360 m away
    Show answer

    Answer: C. The sound travels to the cliff and back: 2d = vt = 340 × 2.0 = 680 m, so d = 340 m. Forgetting the return trip gives 680 m.

  2. 2. For the wave y = 0.05 sin(2πx − 10πt) in SI units, the wave speed is:

    1. 5.0 m s⁻¹
    2. 10 m s⁻¹
    3. 0.20 m s⁻¹
    4. 1.6 m s⁻¹
    Show answer

    Answer: A. v = ω/k = 10π/2π = 5.0 m s⁻¹. Equivalently, λ = 1.0 m and f = 5.0 Hz, so fλ = 5.0 m s⁻¹.

  3. 3. Two coherent waves of equal amplitude A meet with a phase difference of π. The resultant amplitude is:

    1. 2A
    2. zero
    3. A√2
    4. A
    Show answer

    Answer: B. A² = A² + A² + 2A² cos π = 2A² − 2A² = 0. The crest of one falls on the trough of the other: complete destructive interference.

  4. 4. Two tuning forks of frequencies 384 Hz and 380 Hz are sounded together. The time between two successive loud sounds is:

    1. 4 s
    2. 0.50 s
    3. 0.0026 s
    4. 0.25 s
    Show answer

    Answer: D. Beat frequency = 384 − 380 = 4 Hz, so loud sounds come every 1/4 = 0.25 s.

  5. 5. Sound waves of frequency 30 kHz are:

    1. audible to humans
    2. infrasonic
    3. ultrasonic
    4. electromagnetic
    Show answer

    Answer: C. The audible range is about 20 Hz to 20 kHz. 30 kHz is above it, so it is ultrasonic; bats can produce and hear such sound.

Privacy · Terms · Refunds · Delivery