- Practice
- About 24 min
- 5 practice questions
Speed of waves in strings, solids, liquids and gases; Newton's formula and Laplace's correction
Derive v = √(T/μ) for a string and v = √(E/ρ) for longitudinal waves, find the speed of sound in solids, liquids and gases, correct Newton's formula with Laplace's adiabatic idea, and explain what changes the speed of sound in air.
If something looks wrong, please tell us.
By the end of this lesson you can
- Derive the speed of a transverse wave on a stretched string, v = √(T/μ).
- Derive the speed of a longitudinal wave, v = √(K/ρ), and use v = √(Y/ρ) for a rod.
- Calculate the speed of sound in air by Newton's formula and apply Laplace's correction.
- Explain the effects of pressure, temperature, density, humidity and wind on the speed of sound.
Put your ear to a long iron rail while someone taps the far end with a hammer, and you hear two taps: first through the rail, then through the air. Sound travels at different speeds in different media. In every case the speed is set by an elastic property (which pulls the medium back) and an inertial property (which resists motion): v = √(elastic property / inertial property).
Transverse waves on a stretched string
Let a pulse travel to the right along a string with tension T and linear mass density μ = dm/dl (mass per unit length). Look at the pulse from a frame moving with it: the string then flows through the pulse at speed v. Near the top of the pulse, a tiny element of length dl and mass dm = μ dl follows an arc of a circle of radius R that subtends an angle θ = dl/R at the centre.
- Centripetal force needed: (dm)v²/R = μ dl v²/R.
- Force supplied by the tension: the horizontal components of T at the two ends cancel; the vertical components point towards the centre and add to 2T sin(θ/2). For a small pulse sin(θ/2) ≈ θ/2, so the net radial force is Tθ = T dl/R.
- Equating: T dl/R = μ dl v²/R, so v² = T/μ.
Transverse wave on a string: v = √(T/μ)
So the speed rises with the square root of the tension, falls with the square root of the mass per unit length, and does not depend on the shape of the pulse.
Longitudinal waves in an elastic medium
Take a fluid of density ρ at pressure P in a long tube of cross-section A. At t = 0 a piston at the left end starts moving right with a small speed u. In time Δt the piston moves uΔt, while the compression it creates moves vΔt. The fluid set moving in this time has mass Δm = ρA vΔt and gains momentum ρA vΔt u. The impulse on it is (ΔP)A Δt, where ΔP is the extra pressure. Equating, ΔP = ρvu. The fluid of volume V = AvΔt has been squeezed by ΔV = AuΔt, so by the definition of bulk modulus K, ΔP = K ΔV/V = K u/v. Combining: ρvu = Ku/v, so v = √(K/ρ).
| Medium | Speed of longitudinal waves | Elastic modulus used |
|---|---|---|
| General elastic medium | v = √(E/ρ) | Modulus of elasticity E |
| Thin rod (one dimension) | v = √(Y/ρ) | Young's modulus Y |
| Extended solid (three dimensions) | v = √((K + 4η/3)/ρ) | Bulk modulus K and modulus of rigidity η |
| Liquid | v = √(K/ρ) | Bulk modulus K |
Solids are far stiffer than gases for their density, so sound travels fastest in solids, slower in liquids and slowest in gases. The Tamil Nadu textbook tabulates typical values: a few thousand metres per second in metals, about 1500 m s⁻¹ in water, and about 331 m s⁻¹ in air at 0 °C.
Newton's formula for the speed of sound in air
Newton assumed that compressions and rarefactions form slowly, so heat has time to flow and the temperature stays constant: an isothermal process obeying Boyle's law, PV = constant. Differentiating, P dV + V dP = 0, so the isothermal bulk modulus is K_I = −V dP/dV = P. Hence v = √(P/ρ). At normal temperature and pressure, P = 1.013 × 10⁵ Pa (76 cm of mercury) and ρ = 1.293 kg m⁻³ give v = √(1.013 × 10⁵/1.293) ≈ 280 m s⁻¹. The measured value at 0 °C is about 332 m s⁻¹, so Newton's value is too low by about 16%.
Laplace's correction
In 1816 Laplace pointed out that compressions and rarefactions happen very quickly, and air is a poor conductor of heat, so there is no time for heat exchange. The process is adiabatic, obeying PV^γ = constant (γ = Cp/Cv). Differentiating, V^γ dP + γP V^(γ−1) dV = 0, so the adiabatic bulk modulus is K_A = −V dP/dV = γP. Hence v = √(γP/ρ). Air is mostly diatomic, so γ = 1.4 and v = √1.4 × 280 ≈ 331 m s⁻¹, in good agreement with experiment.
Newton: v = √(P/ρ) (isothermal). Laplace: v = √(γP/ρ) (adiabatic), about 331 m s⁻¹ in air at 0 °C.
Newton's assumption versus Laplace's correction
-
Newton
- Process taken as isothermal
- PV = constant, K = P
- v = √(P/ρ) ≈ 280 m s⁻¹
- About 16% below experiment
-
Laplace
- Process taken as adiabatic
- PV^γ = constant, K = γP
- v = √(γP/ρ) ≈ 331 m s⁻¹
- Agrees with experiment
Factors affecting the speed of sound in a gas
For an ideal gas P/ρ is proportional to the absolute temperature T, so v = √(γP/ρ) ∝ √T. This gives:
- Pressure: at a fixed temperature, changing P changes ρ in the same ratio, so P/ρ and the speed are unchanged. Speed does not depend on pressure.
- Temperature: v ∝ √T. With v₀ = 331 m s⁻¹ at 0 °C, v ≈ v₀(1 + t/546) ≈ (331 + 0.61t) m s⁻¹ for a temperature of t °C: the speed rises about 0.61 m s⁻¹ per degree Celsius.
- Density: for gases with the same γ at the same pressure, v ∝ 1/√ρ, so sound is faster in lighter gases.
- Humidity: water vapour is less dense than dry air, so moist air is less dense than dry air at the same pressure, and sound travels faster in humid air.
- Wind: sound travelling with the wind moves faster relative to the ground; against the wind, slower.
Worked example 1: a pulse on a string
A string with μ = 5.0 × 10⁻³ kg m⁻¹ is stretched by a hanging mass of 2.0 kg (g = 9.8 m s⁻²). Find the wave speed and the time a pulse takes to cover 1.5 m. Step 1: T = mg = 2.0 × 9.8 = 19.6 N. Step 2: v = √(T/μ) = √(19.6/0.0050) = √3920 ≈ 62.6 m s⁻¹. Step 3: t = 1.5/62.6 ≈ 0.024 s (24 ms).
Worked example 2: sound in a rod and in water
(a) A metal rod has Y = 1.6 × 10¹¹ Pa and ρ = 8.0 × 10³ kg m⁻³ (illustrative values). v = √(Y/ρ) = √(1.6 × 10¹¹/8.0 × 10³) = √(2.0 × 10⁷) ≈ 4.5 × 10³ m s⁻¹. (b) Water has K ≈ 2.2 × 10⁹ Pa and ρ = 1.0 × 10³ kg m⁻³. v = √(2.2 × 10⁶) ≈ 1.48 × 10³ m s⁻¹.
Worked example 3: temperature and the speed of sound
(a) Find the speed of sound in air at 30 °C. Using v ≈ 331 + 0.61t: v ≈ 331 + 18.3 ≈ 349 m s⁻¹. (The exact form v = 331√(303/273) gives 349 m s⁻¹ as well.) (b) At what temperature is the speed of sound in air twice its value at 0 °C? v ∝ √T, so T must become 2² = 4 times 273 K: T = 1092 K, or 819 °C.
Key takeaways
- String: v = √(T/μ); longitudinal waves: v = √(E/ρ), √(Y/ρ) for a rod, √(K/ρ) for a fluid.
- Newton (isothermal): v = √(P/ρ) ≈ 280 m s⁻¹, too low.
- Laplace (adiabatic): v = √(γP/ρ) ≈ 331 m s⁻¹ at 0 °C.
- Speed of sound in a gas: independent of pressure, ∝ √T, ∝ 1/√ρ, larger in humid air, changed by wind.
Check your understanding
-
1. The tension in a stretched string is made four times as large. The speed of transverse waves on it:
- becomes four times
- halves
- stays the same
- doubles
Show answer
Answer: D. v = √(T/μ) ∝ √T. Four times the tension gives √4 = 2 times the speed.
-
2. Newton's formula gave a speed of sound in air about 16% lower than measured because he assumed the process was:
- isothermal, when it is actually adiabatic
- adiabatic, when it is actually isothermal
- isobaric
- at constant density
Show answer
Answer: A. Newton took PV = constant (isothermal), giving K = P. Compressions are too fast for heat exchange, so the process is adiabatic with K = γP, which raises the speed by √γ.
-
3. At constant temperature, the pressure of the air is doubled. The speed of sound in it:
- doubles
- halves
- increases by √2
- stays the same
Show answer
Answer: D. v = √(γP/ρ). At a fixed temperature, doubling P also doubles ρ, so P/ρ and the speed do not change.
-
4. Hydrogen and oxygen are at the same temperature and pressure; oxygen is 16 times as dense. The ratio of the speed of sound in hydrogen to that in oxygen is:
- 16 : 1
- 1 : 4
- 4 : 1
- 1 : 16
Show answer
Answer: C. Both are diatomic (same γ) and at the same pressure, so v ∝ 1/√ρ. v_H/v_O = √(ρ_O/ρ_H) = √16 = 4.
-
5. Taking the speed of sound in air as 331 m s⁻¹ at 0 °C and an increase of 0.61 m s⁻¹ per °C, the speed at 20 °C is about:
- 343 m s⁻¹
- 331 m s⁻¹
- 319 m s⁻¹
- 351 m s⁻¹
Show answer
Answer: A. v ≈ 331 + 0.61 × 20 = 331 + 12.2 ≈ 343 m s⁻¹.
Sign in to keep track of the lessons you finish.