Revision notes

Unit 11 Waves: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

What a wave is: types of waves and the terms used to describe them

Transverse and longitudinal waves compared
Transverse wavesLongitudinal waves
Particles vibrate perpendicular to the direction in which the wave travelsParticles vibrate along (parallel to) the direction in which the wave travels
Disturbance appears as crests and troughsDisturbance appears as compressions and rarefactions
Need a medium that resists change of shape (or no medium, for light)Possible in solids, liquids and gases
Examples: waves on a string, lightExample: sound in air

Classifying waves

  • By need of a medium
    • Mechanical: sound, water ripples, string waves
    • Non-mechanical: light, infrared, radio waves
  • By direction of vibration
    • Transverse: crests and troughs
    • Longitudinal: compressions and rarefactions

v = fλ = λ/T; ω = 2πf (rad s⁻¹); k = 2π/λ (rad m⁻¹); v = ω/k

  • A wave carries energy and momentum, not the medium; particles only vibrate about mean positions.
  • Mechanical waves need a medium; electromagnetic waves do not.
  • Transverse: vibration ⊥ propagation (crests, troughs); longitudinal: vibration ∥ propagation (compressions, rarefactions).
  • v = fλ = ω/k, T = 1/f, k = 2π/λ, ω = 2πf.
Read the full lesson

Lesson 2

Speed of waves in strings, solids, liquids and gases; Newton's formula and Laplace's correction

Transverse wave on a string: v = √(T/μ)

MediumSpeed of longitudinal wavesElastic modulus used
General elastic mediumv = √(E/ρ)Modulus of elasticity E
Thin rod (one dimension)v = √(Y/ρ)Young's modulus Y
Extended solid (three dimensions)v = √((K + 4η/3)/ρ)Bulk modulus K and modulus of rigidity η
Liquidv = √(K/ρ)Bulk modulus K

Newton: v = √(P/ρ) (isothermal). Laplace: v = √(γP/ρ) (adiabatic), about 331 m s⁻¹ in air at 0 °C.

Newton's assumption versus Laplace's correction

  • Newton
    • Process taken as isothermal
    • PV = constant, K = P
    • v = √(P/ρ) ≈ 280 m s⁻¹
    • About 16% below experiment
  • Laplace
    • Process taken as adiabatic
    • PV^γ = constant, K = γP
    • v = √(γP/ρ) ≈ 331 m s⁻¹
    • Agrees with experiment
  • String: v = √(T/μ); longitudinal waves: v = √(E/ρ), √(Y/ρ) for a rod, √(K/ρ) for a fluid.
  • Newton (isothermal): v = √(P/ρ) ≈ 280 m s⁻¹, too low.
  • Laplace (adiabatic): v = √(γP/ρ) ≈ 331 m s⁻¹ at 0 °C.
  • Speed of sound in a gas: independent of pressure, ∝ √T, ∝ 1/√ρ, larger in humid air, changed by wind.
Read the full lesson

Lesson 3

Reflection of sound, progressive waves, interference and beats

Classification of sound by frequency
RangeFrequencyNotes from the textbook
InfrasonicBelow 20 HzProduced in earthquakes; not heard by humans
Audible20 Hz to 20 kHzHeard by humans
UltrasonicAbove 20 kHzNot heard by humans; bats produce and hear them

y(x, t) = A sin(kx − ωt); phase velocity v = ω/k = fλ; particle velocity v_p = ∂y/∂t = −Aω cos(kx − ωt)

Constructive and destructive interference

  • Constructive
    • Phase difference φ = 0, 2π, 4π, ...
    • Path difference = nλ
    • A = A₁ + A₂
    • I_max = (√I₁ + √I₂)²
  • Destructive
    • Phase difference φ = π, 3π, 5π, ...
    • Path difference = (odd number) × λ/2
    • A = |A₁ − A₂|
    • I_min = (√I₁ − √I₂)²

Beat frequency = |f₁ − f₂| beats per second

  • Sound obeys the laws of reflection; concave surfaces focus it, convex surfaces spread it.
  • Echo needs at least about 0.1 s delay (about 17 m to the reflector); SONAR measures distance by timing reflected pulses.
  • y = A sin(kx − ωt) travels in +x at v = ω/k; particle velocity is ∂y/∂t, a different thing.
  • Interference: A² = A₁² + A₂² + 2A₁A₂ cos φ, Δφ = 2πΔr/λ; beats = |f₁ − f₂|.
Read the full lesson

Lesson 4

Standing waves, the sonometer, harmonics, and intensity and loudness

Standing wave: y(x, t) = 2A sin(kx) cos(ωt)

Progressive and stationary waves compared
Progressive waveStationary wave
Advances through the medium with a definite speedDoes not advance; the pattern stays in place
All particles vibrate with the same amplitudeAmplitude varies with position: zero at nodes, greatest at antinodes
Carries energy along the direction of travelNo net transfer of energy along the wave
Crests and troughs (transverse) or compressions and rarefactions (longitudinal) moveCrests and troughs, or compressions and rarefactions, form but do not move forward

String fixed at both ends: fₙ = (n/2L)√(T/μ) = n f₁, n = 1, 2, 3, ...

Laws of transverse vibration of a stretched string

  • Law of length
    • T and μ fixed
    • f ∝ 1/l, so f × l = constant
  • Law of tension
    • l and μ fixed
    • f ∝ √T
  • Law of mass
    • l and T fixed
    • f ∝ 1/√μ

Sound intensity level: ΔL = 10 log₁₀(I/I₀) decibel (dB), with I₀ = 10⁻¹² W m⁻²; 1 bel = 10 dB

  • y = 2A sin kx cos ωt: nodes at nλ/2, antinodes at (2m + 1)λ/4; node to antinode is λ/4.
  • Stationary waves do not advance or carry energy along; amplitude varies with position.
  • String: fₙ = (n/2L)√(T/μ); all harmonics present; f ∝ 1/l, ∝ √T, ∝ 1/√μ.
  • I = P/4πr²; loudness depends on the ear; level = 10 log₁₀(I/I₀) dB.
Read the full lesson

Lesson 5

Vibrations of air columns, the resonance column and the Doppler effect

Closed pipe: f = (2n − 1)v/4L, n = 1, 2, 3, ...; only odd harmonics, f₁ : f₂ : f₃ ... = 1 : 3 : 5 : ...

Open pipe: f = nv/2L, n = 1, 2, 3, ...; all harmonics, f₁ : f₂ : f₃ ... = 1 : 2 : 3 : ...

Closed and open organ pipes

  • Closed pipe (clarinet)
    • Node at closed end, antinode at open end
    • Fundamental: L = λ/4, f₁ = v/4L
    • Only odd harmonics: 1 : 3 : 5
    • Lower fundamental for the same length
  • Open pipe (flute)
    • Antinodes at both ends
    • Fundamental: L = λ/2, f₁ = v/2L
    • All harmonics: 1 : 2 : 3
    • Fundamental twice that of a closed pipe of equal length

Speed of sound: v = fλ = 2f(L₂ − L₁); end correction e = (L₂ − 3L₁)/2

Measuring the speed of sound with a resonance column

  1. Strike a tuning fork of known frequency f Hold it over the open end of the tube.
  2. Lower the water from the top Find the first loud resonance; note the column length L₁.
  3. Lower the water further Find the second resonance; note L₂.
  4. Calculate v = 2f(L₂ − L₁); e = (L₂ − 3L₁)/2.

General formula: f′ = f (v + v_L)/(v − v_S), with v_L and v_S positive when each moves towards the other and negative when moving away

— Doppler effect for sound
Doppler formulas for sound
SituationFrequency heard
Listener moves towards stationary sourcef (v + v_L)/v
Listener moves away from stationary sourcef (v − v_L)/v
Source moves towards stationary listenerf v/(v − v_S)
Source moves away from stationary listenerf v/(v + v_S)
Source and listener move towards each otherf (v + v_L)/(v − v_S)
Source and listener move away from each otherf (v − v_L)/(v + v_S)
Source chases listener (source behind, both moving the same way)f (v − v_L)/(v − v_S)
Listener chases source (listener behind, both moving the same way)f (v + v_L)/(v + v_S)
Approaching each other, medium (wind) moving at v_m in the direction of soundf (v + v_m + v_L)/(v + v_m − v_S)
  • Closed pipe: f₁ = v/4L, odd harmonics only; open pipe: f₁ = v/2L, all harmonics.
  • Resonance column: v = 2f(L₂ − L₁), e = (L₂ − 3L₁)/2.
  • Doppler: f′ = f(v + v_L)/(v − v_S), speeds positive towards each other.
  • The Doppler effect in sound is asymmetric because sound moves relative to its medium.
Read the full lesson

Privacy · Terms · Refunds · Delivery