Revision notes

Unit 5 Motion of System of Particles and Rigid Bodies: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Centre of mass of a system of particles and its motion

r⃗_CM = Σmᵢr⃗ᵢ / Σmᵢ (for a continuous body, x_CM = ∫x dm / ∫dm)

Finding the centre of mass of point masses

  1. Choose an origin and axes A clever choice (on one mass, or on a symmetry line) saves work.
  2. Write each mass and its coordinates Keep signs: positions left of or below the origin are negative.
  3. Form Σmᵢxᵢ, Σmᵢyᵢ, Σmᵢzᵢ Multiply each mass by each coordinate and add.
  4. Divide by the total mass M The results are x_CM, y_CM, z_CM.
  • A rigid body keeps its shape; internal forces act between its own particles.
  • r⃗_CM = Σmᵢr⃗ᵢ/M; about the CM, m₁x₁ = m₂x₂ (principle of moments); the CM lies nearer the heavier mass.
  • For a uniform body, the CM is at its geometric centre; for a removed part, treat it as a negative mass.
  • With no external force the CM stays at rest or moves uniformly, even in an explosion; otherwise F⃗_ext = M a⃗_CM.
Read the full lesson

Lesson 2

Torque and angular momentum

τ⃗ = r⃗ × F⃗; τ = rF sin θ = rF⊥ = r⊥F. Out of the page = anticlockwise; into the page = clockwise.

Force and torque side by side

  • Linear motion
    • Force F⃗ changes linear momentum
    • F = dp/dt
    • p⃗ = m v⃗
    • F = ma (mass resists)
  • Rotation about a fixed axis
    • Torque τ⃗ = r⃗ × F⃗ changes angular momentum
    • τ = dL/dt
    • L⃗ = r⃗ × p⃗ = I ω⃗
    • τ = Iα (moment of inertia resists)
  • Torque τ⃗ = r⃗ × F⃗ = (rF sin θ)n̂, unit N m; maximum at θ = 90°, zero for θ = 0°, 180° or r = 0.
  • For a fixed axis, only the torque component along the axis matters.
  • τ = Iα and L = Iω, with I = Σmᵢrᵢ².
  • L⃗ = r⃗ × p⃗ (L = mvd for a straight path); τ = dL/dt; with no external torque L is conserved.
Read the full lesson

Lesson 3

Equilibrium of rigid bodies, couple, principle of moments and centre of gravity

Mechanical equilibrium: F⃗_net = 0 AND τ⃗_net = 0.

Types of equilibrium (summarised from Table 5.2 of the Tamil Nadu textbook)
TypeConditions and behaviour
TranslationalLinear momentum constant; net force zero
RotationalAngular momentum constant; net torque zero
StaticLinear and angular momentum both zero; net force and net torque zero
DynamicLinear and angular momentum constant (not zero); net force and net torque zero
StableAt rest; returns when slightly disturbed; CM rises when disturbed; potential energy is minimum
UnstableAt rest; does not return when slightly disturbed; CM falls when disturbed; potential energy is not minimum and decreases
NeutralAt rest; stays in the new position when disturbed; CM neither rises nor falls; potential energy unchanged

Stable, unstable and neutral equilibrium of a resting body

  • Stable
    • Example: a cone resting on its base
    • Disturbed: CM rises, body returns
  • Unstable
    • Example: a cone balanced on its tip
    • Disturbed: CM falls, body topples
  • Neutral
    • Example: a cone lying on its side
    • Disturbed: CM height unchanged, body stays

Principle of moments: F₁d₁ = F₂d₂. Mechanical advantage of a lever = d₂/d₁ (effort arm/load arm).

  • 'No net force' is not 'no force'; equilibrium needs F⃗_net = 0 and τ⃗_net = 0.
  • Static equilibrium: at rest; dynamic: constant non-zero momenta. Stable, unstable and neutral differ in how the CM height and potential energy change when disturbed.
  • A couple gives zero net force but a non-zero torque F × separation.
  • Principle of moments F₁d₁ = F₂d₂; lever MA = d₂/d₁; a level-road cyclist leans at tan θ = v²/rg.
Read the full lesson

Lesson 4

Moment of inertia, radius of gyration and the theorems of moment of inertia

I = Σmr² = ∫r² dm = MK². Rod: Mℓ²/12 (centre), Mℓ²/3 (end). Ring: MR². Disc: MR²/2 (axes perpendicular to the rod or to the plane).

The two theorems of moment of inertia

  • Parallel axis theorem
    • I = I_C + Md²
    • Works for any body
    • One axis must pass through the centre of mass
    • The two axes are parallel, distance d apart
  • Perpendicular axis theorem
    • I_Z = I_X + I_Y
    • Only for plane (laminar) bodies
    • X and Y in the plane, Z perpendicular to it
    • All three axes meet at one point
Moments of inertia of common bodies (selected from Table 5.3 of the textbook; standard results)
Body (mass M)AxisMoment of inertia IK²/R² (round bodies)
Thin rod, length ℓThrough centre, ⟂ to lengthMℓ²/12—
Thin rod, length ℓThrough one end, ⟂ to lengthMℓ²/3—
Ring, radius RThrough centre, ⟂ to planeMR²1
Ring, radius RA diameterMR²/21/2
Disc, radius RThrough centre, ⟂ to planeMR²/21/2
Disc, radius RA diameterMR²/41/4
Disc, radius RTangent ⟂ to plane (at the edge)3MR²/23/2
Solid cylinder, radius RIts own axisMR²/21/2
Thin hollow sphere, radius RA diameter2MR²/32/3
Solid sphere, radius RA diameter2MR²/52/5
Solid sphere, radius RA tangent7MR²/57/5
  • Moment of inertia I = Σmr² (kg m², [ML²]) depends on mass, its distribution and the axis.
  • Rod Mℓ²/12 (centre) and Mℓ²/3 (end); ring MR²; disc MR²/2.
  • I = MK²; K is the rms distance of the particles from the axis.
  • Parallel axis: I = I_C + Md² (any body). Perpendicular axis: I_Z = I_X + I_Y (plane laminae only).
Read the full lesson

Lesson 5

Rotational dynamics and rolling motion

A spinning dancer: angular momentum stays the same

  1. Arms out: large I, small ω
  2. Pulls arms in: I decreases
  3. Spins faster: ω increases so Iω is unchanged
  4. Stretches arms out again: I increases, ω falls

Then back to step 1: Arms out: large I, small ω

Translational and rotational quantities compared (after Table 5.4 of the textbook)
Translational motionRotation about a fixed axis
Displacement xAngular displacement θ
Velocity v = dx/dtAngular velocity ω = dθ/dt
Acceleration a = dv/dtAngular acceleration α = dω/dt
Mass mMoment of inertia I
Force F = maTorque τ = Iα
Linear momentum p = mvAngular momentum L = Iω
Impulse FΔt = ΔpAngular impulse τΔt = ΔL
Work W = FsWork W = τθ
Kinetic energy ½mv²Kinetic energy ½Iω²
Power P = FvPower P = τω

Pure rolling: v_CM = Rω; contact point at rest; top point moves at 2v_CM.

Sliding versus slipping

  • Sliding (v_CM > Rω)
    • Translation exceeds rotation
    • Contact point moves forward
    • Friction acts backward
    • Example: sudden braking on a wet road
  • Slipping (v_CM < Rω)
    • Rotation exceeds translation
    • Contact point moves backward
    • Friction acts forward
    • Example: a wheel spinning in mud
  • τ = Iα; with no external torque Iω is constant (dancers, divers).
  • W = τθ, KE = ½Iω² = L²/2I, P = τω mirror the translational formulas.
  • Pure rolling: v_CM = Rω, contact point at rest, top point at 2v_CM; sliding v_CM > Rω, slipping v_CM < Rω.
  • Rolling KE = ½Mv²(1 + K²/R²); on an incline a = g sin θ/(1 + K²/R²): solid sphere first, ring last.
Read the full lesson

Privacy · Terms · Refunds · Delivery