- Practice
- About 26 min
- 5 practice questions
Rotational dynamics and rolling motion
Apply τ = Iα and conservation of angular momentum, calculate work, kinetic energy and power in rotation, then analyse pure rolling, slipping and sliding, rolling kinetic energy and rolling down an incline.
If something looks wrong, please tell us.
By the end of this lesson you can
- Solve problems with τ = Iα, including a mass hanging from a string wound on a disc.
- Apply the conservation of angular momentum Iᵢωᵢ = I_fω_f.
- Use W = τθ, KE = ½Iω² = L²/2I and P = τω, and compare rotational and translational quantities.
- Explain pure rolling (v_CM = Rω), slipping and sliding.
- Find the kinetic energy of a rolling body and its acceleration, speed and time on an incline.
Wheels, flywheels, fans, spinning dancers and divers all obey rotational versions of Newton's laws and energy relations. This lesson completes Unit 5 by putting moment of inertia to work and then studying the most common motion of all, rolling, which combines translation and rotation.
Torque and angular acceleration in practice
A non-zero external torque about the axis gives an angular acceleration: τ = Iα, the rotational counterpart of F = ma. A standard problem: a string wound on a disc (mass m₁, radius R, free to turn on a fixed axle) carries a hanging mass m₂. If the string does not slip, a = Rα. Disc: RT = Iα = m₁K²(a/R), so T = m₁(K²/R²)a. Hanging mass: m₂g − T = m₂a. Adding these, a = m₂g/[m₂ + m₁(K²/R²)]. For a disc K²/R² = ½, so a = 2m₂g/(2m₂ + m₁).
Conservation of angular momentum
If no external torque acts, dL/dt = 0, so L = Iω = constant: Iᵢωᵢ = I_fω_f. If I increases, ω decreases, and vice versa. An ice dancer spins slowly with arms stretched out (large I) and much faster with arms pulled in (small I). A diver curls up in the air to reduce I and fit in more somersaults.
A spinning dancer: angular momentum stays the same
- Arms out: large I, small ω
- Pulls arms in: I decreases
- Spins faster: ω increases so Iω is unchanged
- Stretches arms out again: I increases, ω falls
Then back to step 1: Arms out: large I, small ω
Work, kinetic energy and power in rotation
Work: a tangential force F at radius r moves its point of application ds = r dθ, so dW = F ds = F r dθ = τ dθ. Kinetic energy: every particle has the same ω but its own speed vᵢ = rᵢω, so KE = Σ½mᵢrᵢ²ω² = ½Iω². Since L = Iω, multiplying top and bottom by I gives KE = L²/2I. Power: P = dW/dt = τ dθ/dt = τω, matching P = F v.
| Translational motion | Rotation about a fixed axis |
|---|---|
| Displacement x | Angular displacement θ |
| Velocity v = dx/dt | Angular velocity ω = dθ/dt |
| Acceleration a = dv/dt | Angular acceleration α = dω/dt |
| Mass m | Moment of inertia I |
| Force F = ma | Torque τ = Iα |
| Linear momentum p = mv | Angular momentum L = Iω |
| Impulse FΔt = Δp | Angular impulse τΔt = ΔL |
| Work W = Fs | Work W = τθ |
| Kinetic energy ½mv² | Kinetic energy ½Iω² |
| Power P = Fv | Power P = τω |
Rolling: translation plus rotation
In one full turn without slipping, a wheel of radius R moves forward 2πR, its circumference. Its centre moves in a straight line with velocity v_CM, while each point on the rim follows a curve called a cycloid. Every point has two velocities: the translational velocity v_TRANS = v_CM, and a rotational velocity v_ROT = rω perpendicular to its position from the centre. In pure rolling the point of contact is momentarily at rest: there v_TRANS is forward and v_ROT = Rω is backward, and they cancel. So v_CM = Rω. At the topmost point the two add: v = v_CM + Rω = 2v_CM. Pure rolling can therefore be treated either as translation of the CM plus rotation about the CM, or as pure rotation about the point of contact at that instant.
Pure rolling: v_CM = Rω; contact point at rest; top point moves at 2v_CM.
Slipping and sliding
A round body tends to roll on any surface with a coefficient of friction greater than zero; the friction that makes rolling possible is called rolling friction. If the body suddenly speeds up or slows down, the balance v_CM = Rω breaks. Sliding (forward slipping) is v_CM > Rω: more translation than rotation, as when the brakes are slammed on or a vehicle enters a slippery patch. The contact point moves forward, so kinetic friction acts backward, reducing translation and increasing rotation until pure rolling sets in. Slipping (backward slipping) is v_CM < Rω: more rotation than translation, as when a vehicle starts suddenly or a wheel spins in mud. The contact point moves backward, so friction acts forward, reducing rotation and increasing translation.
Sliding versus slipping
-
Sliding (v_CM > Rω)
- Translation exceeds rotation
- Contact point moves forward
- Friction acts backward
- Example: sudden braking on a wet road
-
Slipping (v_CM < Rω)
- Rotation exceeds translation
- Contact point moves backward
- Friction acts forward
- Example: a wheel spinning in mud
Kinetic energy in pure rolling
KE = KE_TRANS + KE_ROT = ½Mv_CM² + ½I_CMω². With I_CM = MK² and ω = v_CM/R: KE = ½Mv_CM²(1 + K²/R²). About the point of contact, I₀ = I_CM + MR² = M(K² + R²) by the parallel axis theorem, and ½I₀ω² gives the same result. The ratio KE_TRANS : KE_ROT : KE = 1 : K²/R² : (1 + K²/R²).
Rolling down an inclined plane
A round body of mass m and radius R rolls without slipping down an incline of angle θ. Along the incline, mg sin θ drives it and static friction f opposes: mg sin θ − f = ma. About the centre only friction gives a torque: Rf = Iα = mK²(a/R), so f = ma(K²/R²). Combining: a = g sin θ/(1 + K²/R²). Starting from rest and rolling a length s = h/sin θ, v² = 2as gives v = √[2gh/(1 + K²/R²)], and t = v/a gives t = √[2h(1 + K²/R²)/(g sin²θ)]. The body with the smallest K²/R² is fastest: released together, a solid sphere (2/5) reaches the bottom first, then a disc (1/2), then a hollow sphere (2/3), and a ring (1) last.
Worked example 1: a mass hanging from a disc
A light string wound on a 2.0 kg disc of radius 0.20 m (free to turn about its axle) carries a 0.50 kg mass (g = 10 m s⁻²). Acceleration: a = 2m₂g/(2m₂ + m₁) = 2 × 0.50 × 10/(1.0 + 2.0) = 10/3 ≈ 3.3 m s⁻² (the radius cancels). Tension: T = m₁(K²/R²)a = 2.0 × ½ × 3.33 ≈ 3.3 N. Check: m₂g − T = 5.0 − 3.3 = 1.7 N, and m₂a = 0.50 × 3.33 ≈ 1.7 N.
Worked example 2: a spinning skater
A skater spins at 3.0 rad s⁻¹ with I = 4.0 kg m² and pulls in her arms so that I = 1.6 kg m². New speed: ω_f = Iᵢωᵢ/I_f = 4.0 × 3.0/1.6 = 7.5 rad s⁻¹. Kinetic energy: before ½ × 4.0 × 9.0 = 18 J; after ½ × 1.6 × 56.25 = 45 J. Angular momentum is conserved but kinetic energy increases: the extra 27 J is work done by her muscles pulling her arms in.
Worked example 3: a flywheel
A flywheel with I = 2.0 kg m² turns at 300 rpm. ω = 300 × 2π/60 = 10π ≈ 31.4 rad s⁻¹. KE = ½ × 2.0 × (10π)² = 100π² ≈ 987 J. If a motor drives such a wheel with a torque of 50 N m at 20 rad s⁻¹, the power is P = τω = 50 × 20 = 1000 W.
Worked example 4: rolling or not?
A wheel of radius 0.50 m has v_CM = 6.0 m s⁻¹ and ω = 15 rad s⁻¹. Rω = 0.50 × 15 = 7.5 m s⁻¹, which is more than v_CM. Since v_CM < Rω, the wheel is slipping (rotation exceeds translation), not rolling purely.
Worked example 5: a solid sphere rolling down a slope
A solid sphere rolls from rest down a slope through a vertical height of 1.4 m (g = 9.8 m s⁻²). For a solid sphere K²/R² = 2/5. Speed at the bottom: v = √[2gh/(1 + 2/5)] = √[2 × 9.8 × 1.4/1.4] = √19.6 ≈ 4.4 m s⁻¹. A ring (K²/R² = 1) from the same height would reach only √(gh) = √13.72 ≈ 3.7 m s⁻¹. Energy split for the sphere: KE_TRANS : KE_ROT = 1 : 2/5 = 5 : 2.
Key takeaways
- τ = Iα; with no external torque Iω is constant (dancers, divers).
- W = τθ, KE = ½Iω² = L²/2I, P = τω mirror the translational formulas.
- Pure rolling: v_CM = Rω, contact point at rest, top point at 2v_CM; sliding v_CM > Rω, slipping v_CM < Rω.
- Rolling KE = ½Mv²(1 + K²/R²); on an incline a = g sin θ/(1 + K²/R²): solid sphere first, ring last.
Check your understanding
-
1. A body rotating freely with no external torque has its moment of inertia halved. Its angular velocity:
- is halved
- stays the same
- doubles
- becomes four times
Show answer
Answer: C. Iᵢωᵢ = I_fω_f. With I_f = Iᵢ/2, ω_f = 2ωᵢ: the angular velocity doubles.
-
2. A wheel rolls without slipping with its centre moving at v. The speed of the topmost point of the wheel is:
- v
- 2v
- zero
- √2 v
Show answer
Answer: B. At the top, the translational velocity v and the rotational velocity Rω = v point the same way, so they add to 2v. The contact point, where they cancel, is at rest.
-
3. A uniform disc of mass 2 kg rolls without slipping with its centre moving at 2 m s⁻¹. Its total kinetic energy is:
- 4 J
- 2 J
- 8 J
- 6 J
Show answer
Answer: D. KE = ½Mv²(1 + K²/R²) = ½ × 2 × 4 × (1 + ½) = 4 × 1.5 = 6 J (4 J translational + 2 J rotational).
-
4. A ring, a disc, a hollow sphere and a solid sphere of the same radius are released together from the top of the same incline and roll without slipping. The first to reach the bottom is the:
- solid sphere
- disc
- hollow sphere
- ring
Show answer
Answer: A. a = g sin θ/(1 + K²/R²). The solid sphere has the smallest K²/R² (2/5), so it has the largest acceleration and arrives first; the ring (K²/R² = 1) is last.
-
5. A rolling wheel of radius 1.5 m has v_CM = 5 m s⁻¹ and angular velocity 3 rad s⁻¹. Its motion is:
- pure rolling
- slipping
- sliding
- pure rotation about the centre
Show answer
Answer: C. Rω = 1.5 × 3 = 4.5 m s⁻¹, which is less than v_CM = 5 m s⁻¹. Translation exceeds rotation (v_CM > Rω), so the wheel is sliding.
Sign in to keep track of the lessons you finish.