- Practice
- About 24 min
- 5 practice questions
Equilibrium of rigid bodies, couple, principle of moments and centre of gravity
State the conditions for translational, rotational and mechanical equilibrium, classify equilibrium types, use couples and the principle of moments, locate the centre of gravity and find a cyclist's angle of bending.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain the difference between 'no force' and 'no net force'.
- State the conditions F⃗_net = 0 and τ⃗_net = 0 for mechanical equilibrium.
- Distinguish static, dynamic, stable, unstable and neutral equilibrium.
- Define a couple and apply the principle of moments to levers and beam balances.
- Explain the centre of gravity and derive tan θ = v²/rg for a cyclist on a level curve.
A book lying on a table is often said to have 'no force' on it. That is wrong: gravity pulls it down and the table pushes it up. The two forces cancel, so there is no net force. The same idea applies to turning: a body can have several torques on it that cancel. This lesson is about bodies whose forces and torques balance.
Conditions for equilibrium
A rigid body is in mechanical equilibrium when both its linear momentum and its angular momentum stay constant. Constant linear momentum means F⃗_net = 0: F⃗₁ + F⃗₂ + … + F⃗ₙ = 0 (translational equilibrium). In practice we resolve the forces into horizontal and vertical components and make each sum zero. Constant angular momentum means τ⃗_net = 0: τ⃗₁ + τ⃗₂ + … + τ⃗ₙ = 0 (rotational equilibrium). Both are vector sums, so a sign convention is needed; a common choice is anticlockwise positive and clockwise negative.
Mechanical equilibrium: F⃗_net = 0 AND τ⃗_net = 0.
Types of equilibrium
| Type | Conditions and behaviour |
|---|---|
| Translational | Linear momentum constant; net force zero |
| Rotational | Angular momentum constant; net torque zero |
| Static | Linear and angular momentum both zero; net force and net torque zero |
| Dynamic | Linear and angular momentum constant (not zero); net force and net torque zero |
| Stable | At rest; returns when slightly disturbed; CM rises when disturbed; potential energy is minimum |
| Unstable | At rest; does not return when slightly disturbed; CM falls when disturbed; potential energy is not minimum and decreases |
| Neutral | At rest; stays in the new position when disturbed; CM neither rises nor falls; potential energy unchanged |
Stable, unstable and neutral equilibrium of a resting body
-
Stable
- Example: a cone resting on its base
- Disturbed: CM rises, body returns
-
Unstable
- Example: a cone balanced on its tip
- Disturbed: CM falls, body topples
-
Neutral
- Example: a cone lying on its side
- Disturbed: CM height unchanged, body stays
Couple
Apply two equal and opposite forces, perpendicular to a uniform rod, at its two ends A and B (a distance 2r apart). The net force is zero, so the rod is in translational equilibrium. But about the midpoint C both forces turn the rod the same way, so their torques add and the rod rotates. Two equal, opposite forces whose lines of action do not coincide form a couple, which produces turning without translation. Its torque is F × (perpendicular distance between the forces). Turning a tap, a steering wheel or a key uses a couple. If the two forces are not equal or not exactly opposite, the body both moves and turns.
Principle of moments
A light rod pivoted at a point carries parallel forces F₁ and F₂ at distances d₁ and d₂ on either side of the pivot, which pushes up with a normal force N. For the rod to rest horizontally: net force zero gives N = F₁ + F₂; net torque about the pivot zero gives F₁d₁ = F₂d₂, the principle of moments. A beam balance uses d₁ = d₂, so F₁ = F₂. In a lever, if F₁ is the load and F₂ the effort, F₁/F₂ = d₂/d₁, so with d₁ < d₂ a small effort lifts a large load. The ratio d₂/d₁ is the mechanical advantage of the lever, and the pivot is called the fulcrum.
Principle of moments: F₁d₁ = F₂d₂. Mechanical advantage of a lever = d₂/d₁ (effort arm/load arm).
Centre of gravity
Every particle of a body is pulled towards the centre of the Earth. Because the Earth is so large, these pulls are practically parallel, and their resultant acts through one point, the centre of gravity (CG): the point where the whole weight of the body acts, whatever its position or orientation. When the gravitational field is uniform over the body, the CG coincides with the centre of mass. To find the CG of a flat lamina of any shape: (1) balance it on a pivot by trial; it stays horizontal only when supported at the CG, because the gravitational torques then cancel and the pivot's push balances the weight; or (2) hang it from several points P, Q, R in turn and draw the vertical line through the point of suspension each time; the lines meet at the CG.
Bending of a cyclist on a curve
A cyclist of total mass m (with the cycle) rides at speed v round a level, unbanked circular road of radius r. In the cyclist's rotating frame the system is at rest, so we add the pseudo centrifugal force mv²/r acting outward through the CG C. The forces are gravity mg, the normal force N and friction f at the contact point A, and mv²/r. Taking torques about A for rotational equilibrium: mg × AB = (mv²/r) × BC, where AB and BC are the horizontal and vertical distances of C from A. If the cyclist leans at θ to the vertical, AB = AC sin θ and BC = AC cos θ, so mg sin θ = (mv²/r) cos θ, giving tan θ = v²/rg, or θ = tan⁻¹(v²/rg). Faster riding or a sharper turn needs more lean.
Worked example 1: two people carrying a plank
A uniform plank 12 m long and of mass 30 kg is carried by Kavin, holding it 1 m from the left end, and Divya, holding it 3 m from the right end (g = 10 m s⁻²). Who supports more? Set-up: weight 300 N acts at the centre (6 m from the left end). Kavin is at 1 m, Divya at 9 m. Torques about Kavin's hand: R_D × (9 − 1) = 300 × (6 − 1), so R_D = 1500/8 = 187.5 N. Forces: R_K = 300 − 187.5 = 112.5 N. Check with torques about Divya's hand: R_K × 8 = 300 × 3 = 900, R_K = 112.5 N. Divya, who is nearer the centre of mass, carries more.
Worked example 2: a lever
A crowbar is used with the fulcrum 0.20 m from a 600 N load and the effort applied 1.2 m from the fulcrum on the other side. Principle of moments: 600 × 0.20 = E × 1.2, so E = 120/1.2 = 100 N. Mechanical advantage = 1.2/0.20 = 6, the same as load/effort = 600/100.
Worked example 3: a see-saw
A 30 kg child sits 1.5 m from the pivot of a see-saw. Where must a 25 kg child sit on the other side to balance it? 30g × 1.5 = 25g × d, so d = 45/25 = 1.8 m. The lighter child sits farther out.
Worked example 4: a couple on a steering wheel
A driver pulls with 15 N on opposite sides of a steering wheel of radius 0.20 m, in opposite directions along the rim. The forces are 0.40 m apart, so the couple's torque is τ = 15 × 0.40 = 6.0 N m, while the net force is zero.
Worked example 5: a cyclist on a level curve
(a) A cyclist rides at 10 m s⁻¹ round a curve of radius 20 m (g = 10 m s⁻²). tan θ = v²/rg = 100/(20 × 10) = 0.5, so θ = tan⁻¹(0.5) ≈ 26.6° from the vertical. (b) Another cyclist leans at 45° while riding at 15 m s⁻¹. r = v²/(g tan θ) = 225/(10 × 1) = 22.5 m.
Key takeaways
- 'No net force' is not 'no force'; equilibrium needs F⃗_net = 0 and τ⃗_net = 0.
- Static equilibrium: at rest; dynamic: constant non-zero momenta. Stable, unstable and neutral differ in how the CM height and potential energy change when disturbed.
- A couple gives zero net force but a non-zero torque F × separation.
- Principle of moments F₁d₁ = F₂d₂; lever MA = d₂/d₁; a level-road cyclist leans at tan θ = v²/rg.
Check your understanding
-
1. For a couple acting on a rigid body:
- the net force is zero and the net torque is not zero
- both the net force and the net torque are zero
- the net force is not zero but the net torque is zero
- both the net force and the net torque are not zero
Show answer
Answer: A. The two forces are equal and opposite, so they add to zero, but because their lines of action are separated they turn the body the same way, giving a torque F × d.
-
2. A 40 kg child sits 2 m from the pivot of a see-saw. For balance, a 50 kg child must sit on the other side at:
- 2.5 m
- 1.25 m
- 2 m
- 1.6 m
Show answer
Answer: D. Principle of moments: 40 × 2 = 50 × d, so d = 80/50 = 1.6 m.
-
3. A body in stable equilibrium is slightly displaced. Its potential energy:
- was a maximum and decreases
- was a minimum and increases
- stays the same
- becomes zero
Show answer
Answer: B. In stable equilibrium the potential energy is a minimum; any small displacement raises the centre of mass and increases the potential energy, and the body returns.
-
4. A cyclist rides round a level circular track of radius 10 m at 10 m s⁻¹ (g = 10 m s⁻²). The angle at which he must lean from the vertical is:
- 30°
- 60°
- 45°
- 90°
Show answer
Answer: C. tan θ = v²/rg = 100/(10 × 10) = 1, so θ = 45°.
-
5. In a lever the effort arm is 1.5 m and the load arm is 0.3 m. The mechanical advantage is:
- 0.2
- 5
- 1.8
- 0.45
Show answer
Answer: B. Mechanical advantage = effort arm/load arm = d₂/d₁ = 1.5/0.3 = 5: an effort of 100 N could balance a 500 N load.
Sign in to keep track of the lessons you finish.