• Practice
  • About 22 min
  • 5 practice questions

Centre of mass of a system of particles and its motion

Define a rigid body and its centre of mass, locate the centre of mass of point masses and uniform bodies, and use the motion of the centre of mass in boat and explosion problems.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Distinguish internal and external forces and explain what a rigid body is.
  • Define the centre of mass and find it for point masses using x_CM = Σmᵢxᵢ/M and its vector form.
  • Use a convenient origin for two point masses and state the principle of moments m₁x₁ = m₂x₂.
  • Find the centre of mass of a uniform rod by integration and of a body with a part removed.
  • Use v_CM and a_CM: F⃗_ext = M a⃗_CM, and the centre of mass is unchanged by internal forces.

Until now we treated even a bus or a planet as a single point. Real objects have size and shape and are made of very many particles. In Unit 5 of the Tamil Nadu textbook we take size and shape into account. The forces on such a body are of two kinds: internal forces, which the particles of the system exert on one another, and external forces, which act on the particles from outside the system.

A rigid body keeps a definite, fixed shape even when an external force acts on it: the distances between its particles do not change. No real body is perfectly rigid, but for the bodies studied here the deformations are small enough to ignore. (Deformation is studied in Unit 7, elasticity of solids.)

The centre of mass

Throw a cricket bat spinning into the air. Most points of the bat trace complicated loops, but one special point traces a clean parabola, exactly like a small ball thrown in the same way. That point is the centre of mass (CM): the point where the entire mass of the body may be regarded as concentrated. For a body of regular shape with uniform mass distribution the CM is at the geometric centre: the centre of a circle or sphere, the meeting point of the diagonals of a square or rectangle, the meeting point of the body diagonals of a cube or cuboid. The CM can lie inside the body or even outside it (a ring's CM is at its empty centre).

Centre of mass of point masses

A point mass is an imagined particle with mass but no size. For n point masses m₁, m₂, …, mₙ at x-coordinates x₁, x₂, …, xₙ, with total mass M = Σmᵢ, the coordinates of the centre of mass are x_CM = Σmᵢxᵢ/M, y_CM = Σmᵢyᵢ/M, z_CM = Σmᵢzᵢ/M. In vector form, r⃗_CM = Σmᵢr⃗ᵢ/M, where r⃗ᵢ = xᵢî + yᵢĵ + zᵢk̂.

r⃗_CM = Σmᵢr⃗ᵢ / Σmᵢ (for a continuous body, x_CM = ∫x dm / ∫dm)

For two point masses on the x-axis, the choice of origin can simplify the work. (i) With both masses on the positive x-axis, x_CM = (m₁x₁ + m₂x₂)/(m₁ + m₂). (ii) With the origin on m₁ (x₁ = 0), x_CM = m₂x₂/(m₁ + m₂). (iii) With the origin at the CM itself, x_CM = 0 and m₁ is at −x₁, which gives m₁x₁ = m₂x₂, the principle of moments. The CM always lies nearer the larger mass.

Finding the centre of mass of point masses

  1. Choose an origin and axes A clever choice (on one mass, or on a symmetry line) saves work.
  2. Write each mass and its coordinates Keep signs: positions left of or below the origin are negative.
  3. Form Σmᵢxᵢ, Σmᵢyᵢ, Σmᵢzᵢ Multiply each mass by each coordinate and add.
  4. Divide by the total mass M The results are x_CM, y_CM, z_CM.

Bodies with a continuous distribution of mass

For a body whose mass is spread out, take a tiny element of mass dm at position x, treat it as a point mass and replace the sums by integrals: x_CM = ∫x dm/∫dm, and similarly for y and z. For a uniform rod of mass M and length ℓ along the x-axis from x = 0, the mass per unit length is λ = M/ℓ, so dm = (M/ℓ) dx. Then x_CM = (1/M) ∫ from 0 to ℓ of x (M/ℓ) dx = (1/ℓ)[x²/2] from 0 to ℓ = ℓ/2, the geometric centre, as expected.

Motion of the centre of mass

Differentiating x_CM with respect to time gives v_CM = Σmᵢvᵢ/Σmᵢ and a_CM = Σmᵢaᵢ/Σmᵢ. Internal forces come in equal and opposite pairs, so they cancel when we add over the whole system. Hence: if F⃗_ext = 0, then a⃗_CM = 0, and the CM stays at rest or moves with constant velocity, even though individual parts may move about because of internal forces. If F⃗_ext ≠ 0, the CM accelerates as F⃗_ext = M a⃗_CM, as if all the mass were at the CM and all external forces acted there.

Explosions. If a body breaks up because of internal forces (a firework shell bursting by itself), the CM continues in its earlier state of rest or motion; a shell's CM continues along the original parabola even though the fragments fly apart. If the break-up is caused by an external agency, the motion of the CM changes too.

Worked example 1: two point masses

A 2 kg mass is at x = 1 m and a 6 kg mass at x = 5 m. From the origin: x_CM = (2 × 1 + 6 × 5)/(2 + 6) = (2 + 30)/8 = 4 m. From the 2 kg mass (shift the origin there, so the 6 kg mass is at 4 m): x_CM = (2 × 0 + 6 × 4)/8 = 24/8 = 3 m, which agrees (4 − 1 = 3). Check by moments about the CM: 2 × 3 = 6 and 6 × 1 = 6. Equal, as required.

Worked example 2: masses in three dimensions

A 2 kg mass is at r⃗₁ = (î + 2ĵ) m and a 3 kg mass at r⃗₂ = (4î − 3ĵ + 5k̂) m. Step 1: Σmr⃗ = 2(î + 2ĵ) + 3(4î − 3ĵ + 5k̂) = (2 + 12)î + (4 − 9)ĵ + 15k̂ = 14î − 5ĵ + 15k̂. Step 2: divide by M = 5 kg: r⃗_CM = (2.8î − ĵ + 3k̂) m.

Worked example 3: a disc with a hole

A hole of radius R/3 is cut from a uniform disc of radius R (mass M before cutting). The centre of the hole is 2R/3 from the centre of the disc. Where is the CM of the rest? Step 1: mass is proportional to area, so the removed mass is m = M (R/3)²/R² = M/9, and the remaining mass is 8M/9. Step 2: take the disc's centre as origin. The whole disc has its CM there, so (remaining mass) × x + m × (2R/3) = 0. Step 3: (8M/9) x = −(M/9)(2R/3), so x = −(2R/3)/8 = −R/12: the CM of the rest is R/12 from the centre, on the side away from the hole.

Worked example 4: walking on a boat

A 60 kg fisherman walks along a 240 kg boat on still water at 1.5 m s⁻¹ relative to the shore. Ignore water friction. Step 1: friction between his feet and the boat is internal to the man-boat system, and there is no external horizontal force, so v_CM stays zero: 60 × 1.5 + 240 × v_boat = 0. Step 2: v_boat = −90/240 = −0.375 m s⁻¹: the boat moves backwards. Step 3: relative to the man, the boat's velocity is −0.375 − 1.5 = −1.875 m s⁻¹.

Worked example 5: a shell that bursts

A 4 kg shell would land at range R. At the top of its path it bursts by itself into 3 kg and 1 kg pieces, which reach the ground at the same moment. The 3 kg piece lands at 0.8R from the gun. Step 1: internal forces do not change the CM's path, so the CM lands at R. Step 2: take moments about the CM's landing point: the 3 kg piece is 0.2R short of it, so 3 × 0.2R = 1 × d, giving d = 0.6R beyond it. Answer: the 1 kg piece lands at R + 0.6R = 1.6R from the gun.

Key takeaways

  • A rigid body keeps its shape; internal forces act between its own particles.
  • r⃗_CM = Σmᵢr⃗ᵢ/M; about the CM, m₁x₁ = m₂x₂ (principle of moments); the CM lies nearer the heavier mass.
  • For a uniform body, the CM is at its geometric centre; for a removed part, treat it as a negative mass.
  • With no external force the CM stays at rest or moves uniformly, even in an explosion; otherwise F⃗_ext = M a⃗_CM.

Check your understanding

  1. 1. A 1 kg mass is at x = 0 and a 3 kg mass is at x = 4 m. The centre of mass is at:

    1. x = 2 m
    2. x = 3 m
    3. x = 1 m
    4. x = 4 m
    Show answer

    Answer: B. x_CM = (1 × 0 + 3 × 4)/(1 + 3) = 12/4 = 3 m. It lies nearer the heavier 3 kg mass, not at the midpoint (2 m).

  2. 2. The centre of mass of a uniform rod of length ℓ, measured from one end, is at:

    1. ℓ/3
    2. ℓ/4
    3. ℓ/2
    4. 2ℓ/3
    Show answer

    Answer: C. x_CM = ∫x dm/M with dm = (M/ℓ)dx from 0 to ℓ gives (1/ℓ)(ℓ²/2) = ℓ/2, the geometric centre.

  3. 3. A 50 kg boy walks at 2 m s⁻¹ (relative to the shore) along a 200 kg boat floating on still, frictionless water. The boat moves:

    1. at 0.5 m s⁻¹ opposite to the boy
    2. at 2 m s⁻¹ opposite to the boy
    3. at 0.5 m s⁻¹ in the boy's direction
    4. not at all
    Show answer

    Answer: A. No external horizontal force acts, so the total momentum stays zero: 50 × 2 + 200 v = 0, v = −0.5 m s⁻¹, i.e. 0.5 m s⁻¹ opposite to the boy.

  4. 4. A shell moving along a parabola explodes in mid-air because of its own internal forces. After the explosion the centre of mass of the fragments:

    1. stops at once
    2. falls vertically
    3. moves in a straight line along the tangent
    4. continues along the same parabola
    Show answer

    Answer: D. Internal forces cannot change the motion of the centre of mass; only external forces (here gravity alone) decide it, so the CM keeps to the original parabola.

  5. 5. A net external force of 12 N acts on a system of particles of total mass 4 kg. The acceleration of its centre of mass is:

    1. 48 m s⁻²
    2. 0.33 m s⁻²
    3. 3 m s⁻²
    4. zero, because internal forces cancel
    Show answer

    Answer: C. F_ext = M a_CM, so a_CM = 12/4 = 3 m s⁻². Internal forces cancel, but this external force does not.

Sign in to keep track of the lessons you finish.

Next lesson → Torque and angular momentum

Privacy · Terms · Refunds · Delivery