• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Heat and Thermodynamics

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions before checking the answers. Use R = 8.314 J mol⁻¹ K⁻¹, s_water = 4186 J kg⁻¹ K⁻¹ and L_f = 3.34 × 10⁵ J kg⁻¹ unless told otherwise, and always convert temperatures to kelvin in gas laws and efficiencies.

Final self-assessment

  1. 1. A tyre's air is at 300 kPa at 27 °C. If it warms to 57 °C with no change in volume, the pressure becomes:

    1. 633 kPa
    2. 330 kPa
    3. 273 kPa
    4. 300 kPa
    Show answer

    Answer: B. P/T is constant with T in kelvin: P₂ = 300 × 330/300 = 330 kPa. Using Celsius (300 × 57/27) gives the wrong 633 kPa.

  2. 2. How many moles of ideal gas occupy 8.314 L at 1.0 × 10⁵ Pa and 300 K?

    1. 3.0 mol
    2. 1.0 mol
    3. 0.033 mol
    4. 0.33 mol
    Show answer

    Answer: D. μ = PV/RT = 1.0 × 10⁵ × 8.314 × 10⁻³/(8.314 × 300) = 831.4/2494 = 0.33 mol.

  3. 3. A metal rod lengthens by 0.10% when heated through a certain temperature rise. A sheet of the same metal heated through the same rise increases in area by about:

    1. 0.10%
    2. 0.30%
    3. 0.20%
    4. 0.01%
    Show answer

    Answer: C. α_A ≈ 2α_L, so the fractional area change is about twice the fractional length change: 2 × 0.10% = 0.20%.

  4. 4. 0.10 kg of ice at 0 °C is put into 0.40 kg of water at 50 °C in an insulated vessel. The final temperature is about:

    1. 24 °C
    2. 40 °C
    3. 0 °C
    4. 33 °C
    Show answer

    Answer: A. Heat to melt the ice: 0.10 × 3.34 × 10⁵ = 33 400 J, less than the 83 720 J the water could give by cooling to 0 °C, so all the ice melts. Then 0.40 × 4186 × (50 − T) = 33 400 + 0.10 × 4186 × T, so 83 720 − 1674T = 33 400 + 419T, giving 50 320 = 2093T and T ≈ 24 °C.

  5. 5. A body cools from 70 °C to 60 °C in 5.0 min in a room at 20 °C. Using Newton's law of cooling with average temperatures, the time to cool from 60 °C to 50 °C is about:

    1. 5.0 min
    2. 4.0 min
    3. 10 min
    4. 6.4 min
    Show answer

    Answer: D. First interval: rate 10/5.0 = 2.0 °C min⁻¹ at an average excess of 65 − 20 = 45 °C, so k = 2.0/45. Second: average excess 55 − 20 = 35 °C, rate = 35 × 2.0/45 = 1.56 °C min⁻¹. Time = 10/1.56 ≈ 6.4 min.

  6. 6. Black body B emits its peak radiation at half the wavelength of black body A. The ratio of the power radiated per unit area by B to that by A is:

    1. 2
    2. 16
    3. 4
    4. 1/16
    Show answer

    Answer: B. Wien: λ_m T = constant, so T_B = 2T_A. Stefan-Boltzmann: E ∝ T⁴, so E_B/E_A = 2⁴ = 16.

  7. 7. 5.0 kJ of work is done on a gas while it loses 2.0 kJ of heat. The change in its internal energy is:

    1. −7.0 kJ
    2. −3.0 kJ
    3. +3.0 kJ
    4. +7.0 kJ
    Show answer

    Answer: C. ΔU = Q − W with Q = −2.0 kJ (heat lost) and W = −5.0 kJ (work done on the gas). ΔU = −2.0 − (−5.0) = +3.0 kJ.

  8. 8. A quasi-static process is one that:

    1. happens so slowly that the system is practically in equilibrium at every stage
    2. happens suddenly with no heat exchange
    3. always takes place at constant temperature
    4. can never be shown on a PV diagram
    Show answer

    Answer: A. A quasi-static process is infinitely slow, so the system passes through equilibrium states and the equation of state applies throughout. It need not be isothermal, and it can be drawn on a PV diagram.

  9. 9. Two moles of an ideal gas with C_v = 20.8 J mol⁻¹ K⁻¹ are heated by 50 K at constant pressure. The heat supplied is about:

    1. 2080 J
    2. 831 J
    3. 4160 J
    4. 2910 J
    Show answer

    Answer: D. C_p = C_v + R = 20.8 + 8.3 = 29.1 J mol⁻¹ K⁻¹. Q = μC_pΔT = 2 × 29.1 × 50 = 2910 J. (2080 J would be the constant-volume value.)

  10. 10. One mole of an ideal gas at 300 K expands isothermally to twice its volume. The work done by the gas is about (ln 2 = 0.693):

    1. 2.49 kJ
    2. 1.73 kJ
    3. 0.69 kJ
    4. 3.46 kJ
    Show answer

    Answer: B. W = μRT ln(V_f/V_i) = 1 × 8.314 × 300 × 0.693 = 2494 × 0.693 ≈ 1.73 × 10³ J.

  11. 11. Air (γ = 1.4) at 300 K is compressed adiabatically to 1/32 of its volume. Its final temperature is:

    1. 420 K
    2. 9600 K
    3. 1200 K
    4. 600 K
    Show answer

    Answer: C. T_f = T_i(V_i/V_f)^(γ−1) = 300 × 32^0.4. Since 32 = 2⁵, 32^0.4 = 2² = 4. T_f = 1200 K.

  12. 12. An ideal gas starts from the same state and doubles its volume once isobarically, once isothermally and once adiabatically. The work done by the gas is:

    1. greatest for isobaric and least for adiabatic
    2. greatest for adiabatic and least for isobaric
    3. the same in all three
    4. greatest for isothermal and least for isobaric
    Show answer

    Answer: A. On a PV diagram the isobar is horizontal, the isotherm falls, and the adiabat falls more steeply. The area under the curve, which is the work, is therefore largest for the isobaric expansion and smallest for the adiabatic one.

  13. 13. A Carnot engine with its sink at 300 K has an efficiency of 40%. To raise the efficiency to 50% with the same sink, the source temperature must be raised by:

    1. 50 K
    2. 200 K
    3. 60 K
    4. 100 K
    Show answer

    Answer: D. η = 1 − T_L/T_H. For 40%: T_H = 300/0.60 = 500 K. For 50%: T_H = 300/0.50 = 600 K. The rise is 100 K.

  14. 14. An inventor claims an engine that works between 400 K and 300 K with an efficiency of 60%. The claim is:

    1. possible, if friction is removed
    2. impossible, because the Carnot limit is only 25%
    3. possible, if the working substance is helium
    4. impossible, because no engine can exceed 40%
    Show answer

    Answer: B. No engine can beat a Carnot engine between the same reservoirs: η_max = 1 − 300/400 = 25%. A 60% claim violates the second law, whatever the working substance.

  15. 15. According to the second law expressed through entropy, in every natural (irreversible) process the total entropy of the system and its surroundings:

    1. decreases
    2. stays exactly the same
    3. increases
    4. becomes zero
    Show answer

    Answer: C. Natural processes, such as heat flowing from hot to cold or gas spreading through a room, increase the total entropy. Only an ideal reversible process leaves it unchanged.

Questions 1-3: lesson 1 (gas law and expansion). Questions 4-6: lesson 2 (calorimetry, cooling and radiation). Questions 7-9: lesson 3 (first law, quasi-static processes and specific heats). Questions 10-12: lesson 4 (thermodynamic processes). Questions 13-15: lesson 5 (heat engines and entropy).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery