Revision notes

Unit 10 Surface Chemistry: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Adsorption: types, factors, Freundlich isotherm and applications

For adsorption: ΔG < 0, ΔS < 0, so ΔH < 0. Adsorption is spontaneous and exothermic.

Chemisorption and physisorption compared (following the Tamil Nadu textbook)
PropertyChemisorptionPhysisorption
SpeedSlowAlmost instantaneous
SpecificityHighly specific to adsorbent and adsorbateNot specific
ForcesChemical bonds; electrons transferredWeak physical forces; no electron transfer
Heat of adsorptionHigh, about 40-400 kJ mol⁻¹Low, of the order of 40 kJ mol⁻¹ or less
Layer formedMonolayer, at fixed active centresMultilayer, all over the surface
Activation energyAppreciable (activated complex forms)Insignificant
Effect of temperatureFirst increases, then decreasesDecreases as temperature rises
Effect of pressureLittle effect on the amount adsorbedIncreases with pressure

log(x/m) = log k + (1/n) log p. A plot of log(x/m) against log p is a straight line with slope 1/n and intercept log k.

— Freundlich adsorption isotherm

Physisorption against chemisorption on an isobar

  • Physisorption
    • x/m highest at low temperature
    • Falls steadily as temperature rises
    • Weak forces, multilayer
    • Reversible
  • Chemisorption
    • x/m low at low temperature
    • Rises as the surface is activated
    • Falls at high temperature (desorption)
    • Monolayer, specific

Key takeaways: adsorption is a surface effect; it is spontaneous with ΔS < 0, so it is exothermic. Physisorption is fast, weak, multilayer and falls with temperature; chemisorption is slow, specific, monolayer, needs activation and passes through a maximum. Freundlich: log(x/m) = log k + (1/n) log p, with 0 < 1/n < 1.

Read the full lesson

Lesson 2

Catalysis: types, characteristics and theories

Kinds of catalysis

  • By effect on rate
    • Positive: rate increases
    • Negative: rate decreases (ethanol with CHCl₃)
    • Autocatalysis: a product is the catalyst
  • By phase
    • Homogeneous: same phase (NO with SO₂ and O₂)
    • Heterogeneous: different phase (Fe in the Haber process)
  • Helpers and spoilers
    • Promoter: Mo with Fe
    • Poison: As₂O₃ with Pt, H₂S with Fe

Steps in a heterogeneous catalysed reaction

  1. Diffusion reactants move from the bulk to the surface
  2. Adsorption reactants held at active centres
  3. Reaction bonds weaken, activated complex forms products
  4. Desorption products released from the surface
  5. Diffusion away surface is free for new reactants

Key takeaways: a catalyst changes the rate without being used up, by offering a path of lower activation energy. It does not shift equilibrium. Homogeneous catalysts share the reactants' phase; heterogeneous ones do not. Promoters help and poisons block. Intermediate compound theory suits homogeneous catalysis; adsorption theory with active centres explains contact catalysis, poisons and promoters.

Read the full lesson

Lesson 3

Enzyme catalysis, zeolites, phase transfer and nano catalysis

Examples of enzyme-catalysed reactions
Enzyme (source)Reaction
Diastase2(C₆H₁₀O₅)ₙ (starch) + nH₂O → nC₁₂H₂₂O₁₁ (maltose)
Zymase (in yeast)C₆H₁₂O₆ (glucose) → 2C₂H₅OH + 2CO₂
Enzymes of Mycoderma aceti (a bacterium)C₂H₅OH + O₂ → CH₃COOH + H₂O
Urease (in soya beans)NH₂CONH₂ + H₂O → 2NH₃ + CO₂
PepsinHydrolyses peptides (proteins) into smaller fragments

The enzyme cycle

  1. Free enzyme E active site empty
  2. Substrate binds E + S → ES complex
  3. Reaction in the complex activation energy greatly lowered
  4. Products leave ES → P + E; enzyme ready again

Then back to step 1: Free enzyme E

Shape selectivity of zeolites

  • Reactant selectivity
    • Bulky reactant molecules cannot enter the pores
    • Only small reactants reach the active sites
  • Transition-state selectivity
    • The transition state is too large for the pore
    • That reaction gives no product
  • Product selectivity
    • A product too big to diffuse out is not obtained
    • Only products that fit the pores leave

Key takeaways: enzymes act through E + S ⇌ ES → P + E and are very efficient, highly specific, and sensitive to temperature, pH, inhibitors and coenzymes. Zeolites are porous aluminosilicate acid catalysts with shape selectivity. A phase transfer catalyst ferries a reactant across a phase boundary. Nanocatalysts are both highly selective and recoverable.

Read the full lesson

Lesson 4

Colloids: classification, preparation and purification

Lyophilic and lyophobic sols

  • Lyophilic (solvent-loving)
    • Definite attraction between phase and medium
    • Examples: starch, protein, gelatine sols
    • Stable, not easily precipitated
    • Reversible: re-formed by adding the medium
  • Lyophobic (solvent-hating)
    • No attraction between phase and medium
    • Examples: sols of gold, silver, platinum, copper
    • Less stable, precipitated readily
    • Irreversible: not re-formed by adding the medium
Colloids by the physical state of the dispersed phase and the dispersion medium
Dispersion mediumDispersed phaseNameExamples
GasLiquidLiquid aerosolFog, aerosol sprays
GasSolidSolid aerosolSmoke, dust, fumes
LiquidGasFoamWhipped cream, shaving cream, froth
LiquidLiquidEmulsionMilk, cream, mayonnaise
LiquidSolidSolInks, paints, colloidal gold
SolidGasSolid foamPumice stone, foam rubber, bread
SolidLiquidGelButter, cheese
SolidSolidSolid solColoured glass, pearls, opals, some alloys
Chemical methods of preparing sols (each equation checked atom by atom)
MethodEquationSol
OxidationHIO₃ + 5HI → 3H₂O + 3I₂Iodine
Oxidation2H₂Se + O₂ → 2H₂O + 2SeSelenium
Reduction2AuCl₃ + 3HCHO + 3H₂O → 2Au + 6HCl + 3HCOOHGold
HydrolysisFeCl₃ + 3H₂O → Fe(OH)₃ + 3HClFerric hydroxide
Double decompositionAs₂O₃ + 3H₂S → As₂S₃ + 3H₂OArsenious sulphide (yellow)
DecompositionS₂O₃²⁻ + 2H⁺ → S + H₂O + SO₂Sulphur

Key takeaways: a colloid has a dispersed phase in a dispersion medium. Lyophilic sols are stable and reversible; lyophobic sols are not. There are eight types by physical state (no gas in gas). Sols are made by dispersion (mill, Bredig's arc, ultrasound, peptisation) or condensation (oxidation, reduction, hydrolysis, double decomposition, decomposition, solvent exchange), and purified by dialysis, electrodialysis or ultrafiltration.

Read the full lesson

Lesson 5

Properties of colloids, coagulation, protection, emulsions and uses

Charges on some sols found by electrophoresis
Positively charged solsNegatively charged sols
Ferric hydroxideGold, silver, platinum
Aluminium hydroxideArsenious sulphide
Basic dyesClay
HaemoglobinStarch

The oppositely charged ion coagulates a sol, and its power rises steeply with its charge. Small flocculation value = strong coagulating power; small gold number = strong protective power.

Gold numbers given in the Tamil Nadu textbook
Protective colloidGold number
Gelatine0.005-0.01
Egg albumin0.08-0.10
Gum arabic0.10-0.15
Potato starch25

Telling the two types of emulsion apart

  • Oil in water (O/W)
    • Dye test: oil-soluble dye leaves it largely uncoloured
    • Lower viscosity
    • Higher conductivity (water is continuous)
    • Spreads less readily on an oily surface
  • Water in oil (W/O)
    • Dye test: takes the colour of an oil-soluble dye
    • Higher viscosity
    • Lower conductivity
    • Spreads readily on an oily surface

Key takeaways: sols scatter light (Tyndall effect), show Brownian movement and carry charges (double layer, electrophoresis, electro-osmosis). Oppositely charged ions of higher valency coagulate sols more strongly; lyophilic colloids protect lyophobic ones, measured by the gold number. Emulsions are O/W or W/O, identified by dye, viscosity, conductivity and spreading tests.

Read the full lesson

Privacy · Terms · Refunds · Delivery