• Practice
  • About 26 min
  • 5 practice questions

Adsorption: types, factors, Freundlich isotherm and applications

Tell adsorption from absorption, explain why adsorption is spontaneous and exothermic, compare physisorption with chemisorption, use the Freundlich isotherm and list everyday uses of adsorption.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define adsorbent, adsorbate, interface, positive and negative adsorption and desorption.
  • Use ΔG = ΔH − TΔS to show why adsorption is exothermic.
  • Compare physical and chemical adsorption and explain the effect of surface area, nature of gas, temperature and pressure.
  • Interpret adsorption isobars and the Freundlich isotherm x/m = kp¹ᐟⁿ, and give applications of adsorption.

Surface chemistry deals with processes at the interface between two phases: solid-liquid, solid-gas or liquid-liquid. Atoms at a surface are bonded differently from those in the bulk, and that difference matters in heterogeneous catalysis, in colloids, in electrodes and in creams, paints and foods. Unit 10 of the Tamil Nadu textbook begins with adsorption.

Adsorption and absorption

Surface atoms of a solid have unbalanced (residual) forces or free valencies, so they attract molecules that touch them. Charcoal takes up ammonia, silica gel takes up water vapour, and charcoal removes colouring matter from sugar solution. Here the molecules stay on the surface: this is adsorption, a surface phenomenon. In absorption the substance is spread throughout the bulk, as water soaks into a sponge. Adsorption is quick; absorption is slow. When both happen together, McBain called it sorption; Graham called the sorption of gases by metals occlusion.

  • Adsorbent: the material on whose surface adsorption occurs (charcoal, silica gel, Ni, Cu, Pt, Pd, Ag, some colloids).
  • Adsorbate: the substance adsorbed (gases such as N₂, O₂, SO₂, NH₃; solutes such as NaCl or KCl).
  • Interface: the surface separating the two phases, where the adsorbed substance collects.
  • Positive adsorption: concentration at the interface higher than in the bulk; negative adsorption: lower.
  • Desorption: removing an adsorbed substance from the surface.

Why adsorption is exothermic

Adsorption can occur at any interface (gas-solid, liquid-solid, liquid-liquid, solid-solid, gas-liquid). It is spontaneous, so ΔG is negative; when ΔG falls to zero, equilibrium is reached. Molecules held on a surface are less free to move than in the gas, so randomness decreases: ΔS < 0 and −TΔS is positive. For ΔG = ΔH − TΔS to be negative, ΔH must be negative enough. So adsorption is always exothermic.

For adsorption: ΔG < 0, ΔS < 0, so ΔH < 0. Adsorption is spontaneous and exothermic.

Physical and chemical adsorption

In physical adsorption (physisorption, van der Waals adsorption) weak forces such as van der Waals, dipole-dipole and dispersion forces hold the adsorbate, for example N₂ on mica or gases on charcoal. In chemical adsorption (chemisorption, activated adsorption) chemical bonds form between surface and adsorbate, for example O₂ on tungsten, H₂ on nickel or ethanol vapour on nickel.

Chemisorption and physisorption compared (following the Tamil Nadu textbook)
PropertyChemisorptionPhysisorption
SpeedSlowAlmost instantaneous
SpecificityHighly specific to adsorbent and adsorbateNot specific
ForcesChemical bonds; electrons transferredWeak physical forces; no electron transfer
Heat of adsorptionHigh, about 40-400 kJ mol⁻¹Low, of the order of 40 kJ mol⁻¹ or less
Layer formedMonolayer, at fixed active centresMultilayer, all over the surface
Activation energyAppreciable (activated complex forms)Insignificant
Effect of temperatureFirst increases, then decreasesDecreases as temperature rises
Effect of pressureLittle effect on the amount adsorbedIncreases with pressure

Factors affecting adsorption

  • Surface area of the adsorbent: the larger the surface (finely divided or porous solids such as activated charcoal), the more is adsorbed.
  • Nature of the adsorbate: easily liquefied gases (SO₂, NH₃, HCl, CO₂) have high critical temperatures and stronger van der Waals forces, so they are adsorbed readily; permanent gases (H₂, N₂, O₂) with low critical temperatures are adsorbed less.
  • Temperature: physisorption falls as temperature rises; chemisorption first rises (the surface must be activated) and then falls (desorption).
  • Pressure (or concentration): physisorption increases with pressure at a given temperature.

Adsorption isobars and isotherms

Let x be the mass of adsorbate taken up by m g of adsorbent. A plot of x/m against temperature at constant pressure is an adsorption isobar. For physisorption the isobar falls steadily. For chemisorption it rises first, because forming the activated complex needs energy, and then falls at high temperature, because the adsorbed molecules gain enough kinetic energy to desorb. A plot of x/m against pressure (or concentration) at constant temperature is an adsorption isotherm.

The Freundlich adsorption isotherm

Freundlich proposed x/m = kp¹ᐟⁿ, where k and n are constants for a given adsorbent and gas at a given temperature. Experimentally the exponent 1/n lies between 0 and 1 (that is, n > 1), so x/m rises with p but less and less steeply. For adsorption from solution, concentration replaces pressure: x/m = kc¹ᐟⁿ. Taking logarithms gives a straight line:

log(x/m) = log k + (1/n) log p. A plot of log(x/m) against log p is a straight line with slope 1/n and intercept log k.

— Freundlich adsorption isotherm

Limitations: the equation is purely empirical, holds only over a limited pressure range (it deviates at low pressure in the textbook's account), k and n change with temperature, and it has no theoretical basis.

Worked example 1: finding 1/n and k

Practice data: at constant temperature x/m = 0.20 at p = 1 atm and x/m = 0.40 at p = 8 atm. Working: at p = 1, log p = 0, so log(x/m) = log k and k = 0.20. Slope 1/n = [log 0.40 − log 0.20] ÷ [log 8 − log 1] = log 2 ÷ log 8 = log 2 ÷ (3 log 2) = 1/3, so n = 3.

Worked example 2: using the straight line

A log(x/m) against log p plot has slope 0.5 and intercept 0.30 (practice data). Find x/m at p = 9 atm. Working: log(x/m) = 0.30 + 0.5 × log 9 = 0.30 + 0.5 × 0.954 = 0.30 + 0.477 = 0.777. x/m = antilog 0.777 ≈ 6.0. Check directly: k = antilog 0.30 ≈ 2.0, and x/m = 2.0 × 9⁰·⁵ = 2.0 × 3 = 6.0.

Applications of adsorption

  • Gas masks: activated charcoal adsorbs poisonous gases.
  • High vacuum and drying: activated charcoal removes the last traces of gas from vessels; alumina and silica gel dry and purify gases.
  • Softening hard water: permutit exchanges ions on its surface: Na₂Al₂Si₄O₁₂ + CaCl₂ → CaAl₂Si₄O₁₂ + 2NaCl; brine regenerates it.
  • Ion-exchange resins demineralise water: a cation resin swaps H⁺ for Ca²⁺ and Mg²⁺, an anion resin swaps OH⁻ for Cl⁻ and SO₄²⁻.
  • Refining petroleum and vegetable oils with Fuller's earth and silica gel; decolourising sugar with animal charcoal.
  • Chromatography separates mixtures by different adsorption on an adsorbent.
  • Heterogeneous catalysis, e.g. iron in the Haber process and nickel in the hydrogenation of oils.
  • Qualitative analysis: the blue 'lake' test for Al³⁺, where blue litmus is adsorbed on Al(OH)₃.
  • Froth flotation of sulphide ores (wetted by pine oil), mordants and dyes, and adsorption indicators in precipitation titrations.

Physisorption against chemisorption on an isobar

  • Physisorption
    • x/m highest at low temperature
    • Falls steadily as temperature rises
    • Weak forces, multilayer
    • Reversible
  • Chemisorption
    • x/m low at low temperature
    • Rises as the surface is activated
    • Falls at high temperature (desorption)
    • Monolayer, specific

Key takeaways: adsorption is a surface effect; it is spontaneous with ΔS < 0, so it is exothermic. Physisorption is fast, weak, multilayer and falls with temperature; chemisorption is slow, specific, monolayer, needs activation and passes through a maximum. Freundlich: log(x/m) = log k + (1/n) log p, with 0 < 1/n < 1.

Check your understanding

  1. 1. Which signs of ΔG, ΔH and ΔS describe adsorption?

    1. ΔG negative, ΔH positive, ΔS positive
    2. ΔG negative, ΔH negative, ΔS negative
    3. ΔG positive, ΔH negative, ΔS negative
    4. ΔG negative, ΔH negative, ΔS positive
    Show answer

    Answer: B. Adsorption is spontaneous (ΔG < 0). Adsorbed molecules are more ordered, so ΔS < 0, making −TΔS positive. ΔG can be negative only if ΔH is negative: adsorption is exothermic.

  2. 2. Which statement is true of physisorption but NOT of chemisorption?

    1. It forms only a monolayer.
    2. It needs appreciable activation energy.
    3. It forms multilayers and decreases steadily as temperature rises.
    4. It is highly specific.
    Show answer

    Answer: C. Physisorption is held by weak van der Waals forces, builds up several layers and falls as temperature rises. Monolayers, activation energy and specificity are features of chemisorption.

  3. 3. Which gas is adsorbed most readily by charcoal at a given temperature?

    1. H₂
    2. N₂
    3. O₂
    4. NH₃
    Show answer

    Answer: D. Ammonia is easily liquefied: it has a high critical temperature and strong intermolecular forces, so it is adsorbed readily. H₂, N₂ and O₂ are permanent gases with low critical temperatures.

  4. 4. For the Freundlich isotherm, a plot of log(x/m) against log p gives

    1. slope 1/n and intercept log k
    2. slope n and intercept k
    3. slope log n and intercept log k
    4. slope k and intercept 1/n
    Show answer

    Answer: A. log(x/m) = log k + (1/n) log p has the form y = c + mx with y = log(x/m) and x = log p, so the slope is 1/n and the intercept is log k.

  5. 5. For a gas obeying x/m = kp¹ᐟⁿ with 1/n = 0.5, by what factor does x/m change when the pressure is made 4 times larger at the same temperature?

    1. 4 times
    2. 2 times
    3. 16 times
    4. 0.5 times
    Show answer

    Answer: B. x/m is proportional to p⁰·⁵. Multiplying p by 4 multiplies x/m by 4⁰·⁵ = √4 = 2.

Privacy · Terms · Refunds · Delivery