- Practice
- About 23 min
- 5 practice questions
Enzyme catalysis, zeolites, phase transfer and nano catalysis
Explain the mechanism and special features of enzyme catalysis, the structure and shape selectivity of zeolite catalysts, how a phase transfer catalyst works, and the advantages of nanocatalysts.
If something looks wrong, please tell us.
By the end of this lesson you can
- Give examples of enzyme-catalysed reactions with balanced equations.
- Write the mechanism E + S ⇌ ES → P + E and explain the special characteristics of enzyme catalysis.
- Explain why zeolites are acid catalysts and describe reactant, transition-state and product shape selectivity.
- Explain how a phase transfer catalyst and a nanocatalyst work.
The catalysts in our own bodies are enzymes, and they are far more efficient and selective than any metal surface. Chemists have also designed catalysts with built-in selectivity: porous zeolites, phase transfer agents and nanoparticles.
Enzyme catalysis
Enzymes are complex protein molecules with three-dimensional structures that catalyse reactions in living organisms. They are often in the colloidal state and are extremely specific: each enzyme made in a cell catalyses a particular reaction.
| Enzyme (source) | Reaction |
|---|---|
| Diastase | 2(C₆H₁₀O₅)ₙ (starch) + nH₂O → nC₁₂H₂₂O₁₁ (maltose) |
| Zymase (in yeast) | C₆H₁₂O₆ (glucose) → 2C₂H₅OH + 2CO₂ |
| Enzymes of Mycoderma aceti (a bacterium) | C₂H₅OH + O₂ → CH₃COOH + H₂O |
| Urease (in soya beans) | NH₂CONH₂ + H₂O → 2NH₃ + CO₂ |
| Pepsin | Hydrolyses peptides (proteins) into smaller fragments |
Check the urease equation: left 1 C, 2 N, 6 H, 2 O; right 2 NH₃ + CO₂ gives 2 N, 6 H, 1 C, 2 O. Check zymase: C₆H₁₂O₆ has 6 C, 12 H, 6 O; 2C₂H₅OH + 2CO₂ gives 4 + 2 = 6 C, 12 H, 2 + 4 = 6 O.
Mechanism
The enzyme E binds the substrate S (the reactant) to form an enzyme-substrate complex ES, which breaks down into the products P and frees the enzyme: E + S ⇌ ES → P + E. The substrate fits into a site on the enzyme, much as a key fits a lock, which explains the specificity.
The enzyme cycle
- Free enzyme E active site empty
- Substrate binds E + S → ES complex
- Reaction in the complex activation energy greatly lowered
- Products leave ES → P + E; enzyme ready again
Then back to step 1: Free enzyme E
Special characteristics of enzyme catalysis
- Very efficient: one enzyme molecule may convert about a million substrate molecules in a minute. For 2H₂O₂ → 2H₂O + O₂, the textbook gives an activation energy of 18 kcal mol⁻¹ uncatalysed, 11.7 kcal mol⁻¹ with colloidal platinum and less than 2 kcal mol⁻¹ with the enzyme.
- Highly specific: urease hydrolyses urea but has no effect on methylurea, NH₂-CO-NH-CH₃.
- Optimum temperature: the rate rises with temperature up to a point, then falls sharply as the enzyme protein is destroyed (denatured). Enzymes in the human body work best around 37 °C, which is why a very high fever is dangerous.
- Optimum pH: each enzyme works fastest at a particular pH.
- Can be inhibited (poisoned): the action of many drugs depends on inhibiting enzymes, for example in bacteria.
- Activated by coenzymes: small non-protein molecules (often vitamins) increase enzyme activity.
Worked example: how much the barrier falls
Using the textbook's figures for the decomposition of H₂O₂: colloidal platinum lowers the activation energy by 18 − 11.7 = 6.3 kcal mol⁻¹; the enzyme lowers it by more than 18 − 2 = 16 kcal mol⁻¹. In kilojoules (1 kcal = 4.184 kJ), 18 kcal is about 75 kJ and 2 kcal about 8.4 kJ. Because the rate depends exponentially on the activation energy, this drop explains the enormous speed of enzyme reactions.
Zeolite catalysis
Zeolites are microporous, crystalline, hydrated aluminosilicates built from SiO₄ and AlO₄ tetrahedra. Silicon is tetravalent and aluminium trivalent, so each AlO₄ unit leaves the framework with an extra negative charge, balanced by cations such as H⁺ or Na⁺ held in the pores. Zeolites carrying protons are solid acid catalysts, used widely in the petrochemical industry to crack heavy hydrocarbon fractions into petrol and diesel; zeolites carrying Na⁺ act as basic catalysts. Because the active protons lie inside the pores, reactions happen only there, which gives shape selectivity.
Shape selectivity of zeolites
-
Reactant selectivity
- Bulky reactant molecules cannot enter the pores
- Only small reactants reach the active sites
-
Transition-state selectivity
- The transition state is too large for the pore
- That reaction gives no product
-
Product selectivity
- A product too big to diffuse out is not obtained
- Only products that fit the pores leave
Phase transfer catalysis
If one reactant is dissolved in water and the other in an immiscible organic solvent, they meet only at the boundary and react very slowly. Adding a third solvent that mixes with both works but is costly on a large scale. A phase transfer catalyst carries a reactant from one phase into the other instead.
Example: 1-chlorooctane (organic phase) and aqueous sodium cyanide give almost no 1-cyanooctane even after days of heating. With a little tetraalkylammonium chloride, R₄N⁺Cl⁻, the reaction gives nearly 100% yield in an hour or two. The R₄N⁺ ion has hydrophobic alkyl groups and a charged end. In water it swaps Cl⁻ for CN⁻ (R₄N⁺Cl⁻ + NaCN → R₄N⁺CN⁻ + NaCl); R₄N⁺CN⁻ moves into the organic phase and reacts (R₄N⁺CN⁻ + R-Cl → R-CN + R₄N⁺Cl⁻); R₄N⁺Cl⁻ goes back to the water to pick up more CN⁻.
Nano catalysis
Nanomaterials such as metal nanoparticles and metal oxides are used as catalysts. Nanocatalysts combine the advantages of both kinds: like homogeneous catalysts they are highly active and very selective and give excellent yields; like heterogeneous catalysts they can be recovered and reused. They are sometimes called soluble heterogeneous catalysts. The textbook's examples include Fe⁰/Pd⁰ bimetallic nanoparticles converting the pesticide lindane (C₆H₆Cl₆) to benzene and HCl in water, and nano TiO₂ breaking down dyes to CO₂ and water in light (semiconductor photocatalysis).
Key takeaways: enzymes act through E + S ⇌ ES → P + E and are very efficient, highly specific, and sensitive to temperature, pH, inhibitors and coenzymes. Zeolites are porous aluminosilicate acid catalysts with shape selectivity. A phase transfer catalyst ferries a reactant across a phase boundary. Nanocatalysts are both highly selective and recoverable.
Check your understanding
-
1. Which is the accepted mechanism of enzyme catalysis?
- E + P → ES → S + E
- E + S ⇌ ES → P + E
- S → P, with E consumed
- E + S → P, with no intermediate
Show answer
Answer: B. The enzyme binds the substrate to form the enzyme-substrate complex ES, which gives the products and releases the enzyme unchanged, ready to act again.
-
2. Urease hydrolyses urea but not methylurea. This shows that enzyme catalysis is
- highly specific
- independent of temperature
- independent of pH
- the same as homogeneous acid catalysis
Show answer
Answer: A. A small change in the substrate (adding a methyl group) stops the enzyme from acting, because the molecule no longer fits its active site. This is enzyme specificity.
-
3. Why does the rate of an enzyme-catalysed reaction fall sharply above a certain temperature?
- The substrate evaporates.
- The activation energy rises to the uncatalysed value instantly at 37 °C.
- The products inhibit the reaction.
- The enzyme protein is denatured and loses its activity.
Show answer
Answer: D. Up to the optimum temperature the rate rises, as for most reactions. Beyond it, the three-dimensional protein structure of the enzyme is destroyed, so the rate drops, possibly to zero.
-
4. Why do protonated zeolites act as acid catalysts?
- They contain free sulphuric acid in their pores.
- They are made only of silicon dioxide.
- Trivalent aluminium gives the framework a negative charge balanced by H⁺ ions in the pores.
- They release OH⁻ ions.
Show answer
Answer: C. Each AlO₄ tetrahedron in place of SiO₄ leaves one extra negative charge. When this is balanced by H⁺, the zeolite has acidic protons inside its pores and acts as a solid acid.
-
5. In the reaction of 1-chlorooctane with aqueous NaCN, what does tetraalkylammonium chloride do?
- It reacts permanently with 1-chlorooctane.
- It carries CN⁻ ions from the aqueous phase into the organic phase.
- It makes the two liquids miscible by dissolving in both as a solvent.
- It poisons the side reactions.
Show answer
Answer: B. The R₄N⁺ ion pairs with CN⁻ in water and, thanks to its hydrophobic alkyl groups, carries it into the organic layer, where CN⁻ replaces Cl⁻. R₄N⁺Cl⁻ then returns to the water: a phase transfer catalyst.
Sign in to keep track of the lessons you finish.