• Practice
  • About 27 min
  • 5 practice questions

Properties of colloids, coagulation, protection, emulsions and uses

Explain the optical, kinetic and electrical properties of colloids, the coagulation of sols by electrolytes, protective action and gold number, the types and tests of emulsions, and the uses of colloids.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the general properties of sols and explain the Tyndall effect and Brownian movement.
  • Explain the electrical double layer, electrophoresis and electro-osmosis, and name positive and negative sols.
  • Compare the coagulating power of ions, calculate a flocculation value and use the gold number.
  • Classify emulsions, identify their type, explain demulsification and phase inversion, and give applications of colloids.

Why is the sky blue and the sunset red? Why does a river build a delta where it meets the sea? Why does alum clear muddy water? The answers lie in the special properties of colloidal particles.

General properties of sols

  • Colour depends on the method of preparation, the wavelength of light, the size and shape of the particles, and whether the light is reflected or transmitted: diluted milk looks bluish in reflected light and reddish in transmitted light.
  • Heterogeneous nature: dialysis, ultrafiltration and ultracentrifuging show two distinct phases, though colloids are often treated as borderline cases.
  • Filtrability: colloidal particles pass through ordinary filter paper.
  • Non-settling: sols are stable and not noticeably affected by gravity.
  • Diffusion: colloids diffuse through membranes much less readily than true solutions.
  • Colligative properties: sols show them weakly; osmotic pressure is used to find the molar mass of colloidal particles.
  • Shapes: according to the textbook, As₂S₃ particles are spherical, some sols have disc- or plate-like particles, and tungstic acid sol particles are rod-like.

Optical property: the Tyndall effect

A beam of light passing through a true solution cannot be seen from the side. In a sol, the colloidal particles absorb some light and scatter the rest in all directions, so the path of the beam is visible from the side. This scattering was first noticed by Faraday and studied in detail by Tyndall: the Tyndall effect. It distinguishes a colloid from a true solution; the blue colour of the sky is explained by the textbook as a Tyndall effect of particles in the air.

Kinetic property: Brownian movement

Robert Brown saw pollen grains in water moving in a ceaseless, random, zigzag way. Colloidal particles seen under an ultramicroscope move like this because molecules of the dispersion medium keep striking them unevenly from all sides. Brownian movement (i) has been used to calculate the Avogadro number, (ii) supports the kinetic theory, since the motion increases with temperature, and (iii) helps to keep sols stable, because the constant motion stops particles settling under gravity.

Electrical properties

Helmholtz electrical double layer. A colloidal particle preferentially adsorbs one kind of ion, which gives it a charge; this layer attracts a layer of oppositely charged ions from the medium. Because neighbouring particles carry the same charge, they repel and cannot come together, which explains the stability of a sol.

Electrophoresis (cataphoresis). When a potential is applied across platinum electrodes dipping in a sol, the particles move to one electrode. Particles moving to the cathode are positive; those moving to the anode are negative. So electrophoresis shows the sign of the charge. Electro-osmosis. A sol as a whole is neutral, so the medium carries a charge opposite to that of the particles. If the particles are held back (for example by a membrane), the medium itself moves in the field, in the direction opposite to that in which the particles would move.

Charges on some sols found by electrophoresis
Positively charged solsNegatively charged sols
Ferric hydroxideGold, silver, platinum
Aluminium hydroxideArsenious sulphide
Basic dyesClay
HaemoglobinStarch

Coagulation

Coagulation is the flocculation and settling of sol particles. It happens: (i) when electrolytes are added; (ii) during electrophoresis, as the particles are discharged at the electrode; (iii) when two oppositely charged sols are mixed (mutual coagulation); (iv) on boiling, because more collisions bring particles together.

Coagulation by electrolytes. The ion of charge opposite to that of the sol particles causes coagulation, and the higher its charge (valency), the greater its coagulating power. This is commonly called the Hardy-Schulze rule. For a negative sol such as As₂S₃: Al³⁺ > Ba²⁺ > Na⁺. For a positive sol such as Fe(OH)₃: [Fe(CN)₆]⁴⁻ > SO₄²⁻ > Cl⁻. The flocculation value is the minimum concentration of an electrolyte, in millimoles per litre, that coagulates a sol in two hours. The smaller the flocculation value, the greater the coagulating power.

The oppositely charged ion coagulates a sol, and its power rises steeply with its charge. Small flocculation value = strong coagulating power; small gold number = strong protective power.

Worked example 1: a flocculation value

Practice data: 2.5 mL of 0.1 M BaCl₂ is the least amount that coagulates 50 mL of a sol in two hours. Find the flocculation value (ignore the small volume added). Working: millimoles of BaCl₂ = 2.5 mL × 0.1 M = 0.25 mmol. Per litre of sol: 0.25 mmol ÷ 0.050 L = 5 millimoles per litre. An electrolyte with a flocculation value of 0.5 mmol L⁻¹ would be ten times more effective.

Protective action and gold number

Lyophobic sols are coagulated by small amounts of electrolyte, but a little lyophilic colloid protects them: gelatine is added to gold sol, for example. Zsigmondy's gold number measures the protective power: the number of milligrams of a hydrophilic colloid that just prevents the coagulation of 10 mL of gold sol when 1 mL of 10% NaCl solution is added. The smaller the gold number, the greater the protective power.

Gold numbers given in the Tamil Nadu textbook
Protective colloidGold number
Gelatine0.005-0.01
Egg albumin0.08-0.10
Gum arabic0.10-0.15
Potato starch25

Worked example 2: finding a gold number

Practice data: 2.5 mg of a protective colloid is just enough to stop 100 mL of gold sol coagulating under the standard test. Working: the gold number refers to 10 mL of gold sol, so the mass needed is 2.5 mg × (10/100) = 0.25 mg: gold number 0.25. Between gum arabic and potato starch in protective power, much closer to gum arabic.

Emulsions

An emulsion is a colloid of one liquid dispersed in another. Types: oil in water (O/W), such as milk, and water in oil (W/O), such as stiff greases (water in lubricating oil). Making an emulsion is emulsification; a colloid mill can act as a homogeniser. A small amount of emulsifier keeps it stable: lyophilic colloids (glue, gelatine), long-chain compounds with polar groups (soaps, sulphonic acids), or insoluble powders (clay, lamp black).

Telling the two types of emulsion apart

  • Oil in water (O/W)
    • Dye test: oil-soluble dye leaves it largely uncoloured
    • Lower viscosity
    • Higher conductivity (water is continuous)
    • Spreads less readily on an oily surface
  • Water in oil (W/O)
    • Dye test: takes the colour of an oil-soluble dye
    • Higher viscosity
    • Lower conductivity
    • Spreads readily on an oily surface

Demulsification separates an emulsion into its layers, for example by distilling off one component, adding an electrolyte to destroy the charge, destroying the emulsifier chemically, solvent extraction, freezing one component, centrifuging, adding a dehydrating agent (for W/O), ultrasound, or heating under pressure. Inversion of phase is the change of one type into the other: an O/W emulsion stabilised by a potassium soap becomes W/O when CaCl₂ or AlCl₃ is added.

Applications of colloids

  • Body and food: blood and protoplasm are colloids; fats in the intestine are emulsified; milk, cream and butter are colloids.
  • Medicines: antibiotics are made in colloidal form for injection; colloidal gold and calcium are used as tonics; milk of magnesia for stomach upsets; Argyrol (silver sol protected by gelatine) as an eye lotion.
  • Water purification: Al³⁺ from alum coagulates the negatively charged suspended impurities.
  • Washing: soap emulsifies grease and dirt.
  • Tanning: positively charged protein particles of hides are coagulated by tannin; chromium salts give soft, polishable chrome leather.
  • Rubber: latex is an emulsion of negatively charged rubber particles; heating rubber with sulphur gives vulcanised rubber.
  • Sewage disposal and Cottrell precipitator: an electric field discharges and settles dirt particles; the precipitator (the textbook gives about 50 000 V) removes carbon dust from chimney gases.
  • Delta formation: electrolytes in sea water coagulate the clay sol carried by a river.
  • Analysis: many qualitative and quantitative methods use colloidal properties.

Key takeaways: sols scatter light (Tyndall effect), show Brownian movement and carry charges (double layer, electrophoresis, electro-osmosis). Oppositely charged ions of higher valency coagulate sols more strongly; lyophilic colloids protect lyophobic ones, measured by the gold number. Emulsions are O/W or W/O, identified by dye, viscosity, conductivity and spreading tests.

Check your understanding

  1. 1. A beam of light is visible from the side when passed through a starch sol but not through a sugar solution. This is due to

    1. Brownian movement
    2. electrophoresis
    3. the Tyndall effect
    4. electro-osmosis
    Show answer

    Answer: C. Colloidal particles are large enough to scatter light sideways, making the beam's path visible: the Tyndall effect. The molecules of a true sugar solution are too small to scatter it noticeably.

  2. 2. Which ion has the greatest power to coagulate a negatively charged arsenious sulphide sol?

    1. Na⁺
    2. Al³⁺
    3. Ba²⁺
    4. PO₄³⁻
    Show answer

    Answer: B. A negative sol is coagulated by cations, and the higher the charge the greater the power: Al³⁺ > Ba²⁺ > Na⁺. PO₄³⁻ has the same sign of charge as the sol, so it does not coagulate it.

  3. 3. During electrophoresis the particles of a sol move towards the cathode. What can you conclude?

    1. The particles are positively charged, as in a ferric hydroxide sol.
    2. The particles are negatively charged, as in a gold sol.
    3. The particles have no charge.
    4. The dispersion medium is positively charged.
    Show answer

    Answer: A. The cathode is negative, so particles that move to it carry a positive charge. Ferric hydroxide sol is a typical positive sol; the medium carries the opposite (negative) charge.

  4. 4. Gelatine has a gold number of about 0.005-0.01 and potato starch about 25. What does this tell you?

    1. Potato starch is the better protective colloid.
    2. Both protect gold sol equally well.
    3. Gelatine coagulates gold sol.
    4. Gelatine is a far better protective colloid than potato starch.
    Show answer

    Answer: D. The gold number is the mass in milligrams needed to protect 10 mL of gold sol, so a smaller number means a stronger protective colloid. Gelatine needs thousands of times less than potato starch.

  5. 5. An emulsion conducts electricity well and does not take up the colour of an oil-soluble dye. What type is it?

    1. Water in oil (W/O)
    2. A solid sol
    3. Oil in water (O/W)
    4. A gel
    Show answer

    Answer: C. High conductivity means water, with its dissolved ions, is the continuous phase, and an oil-soluble dye colours only the small dispersed oil droplets, so the whole does not look coloured. Both point to an oil-in-water emulsion, like milk.

Privacy · Terms · Refunds · Delivery