Revision notes

Unit 3 p-Block Elements - II: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Group 15: nitrogen and ammonia

ElementNPAsSbBi
Atomic number715335183
Outer configuration2s² 2p³3s² 3p³3d¹⁰ 4s² 4p³4d¹⁰ 5s² 5p³4f¹⁴ 5d¹⁰ 6s² 6p³
State at 293 KGasSolidSolidSolidSolid

Haber process in outline

  1. Raw materials N₂ from liquid air; H₂ from water gas
  2. Compress and heat About 200 atm and 750 K (textbook values)
  3. Iron catalyst With K₂O and Al₂O₃ promoters
  4. Equilibrium mixture N₂ + 3H₂ ⇌ 2NH₃, exothermic
  5. Cool NH₃ liquefies; unreacted gases are recycled

NH₃: sp³, one lone pair, pyramidal, 107°. Reducing agent (N −3 → 0), Brønsted base, Lewis base (ligand).

Key takeaways: N₂ is inert because of its 946 kJ mol⁻¹ triple bond; it reacts at room temperature only with lithium. Ammonia (Haber process) is a basic, hydrogen-bonded, pyramidal molecule; it reduces hot metal oxides, gives N₂ or NCl₃ with chlorine depending on which is in excess, and forms complexes such as [Cu(NH₃)₄]²⁺.

Read the full lesson

Lesson 2

Nitric acid and the oxides and oxoacids of nitrogen

Ostwald process for nitric acid

  1. Ammonia + air NH₃ from the Haber process mixed with about 10 times its volume of air, preheated
  2. Platinum gauze About 1275 K: 4NH₃ + 5O₂ → 4NO + 6H₂O (exothermic)
  3. Oxidation of NO 2NO + O₂ → 2NO₂
  4. Absorption towers 3NO₂ + H₂O → 2HNO₃ + NO; the NO is reoxidised with air and recycled
Metal and acidOverall equationMain nitrogen product
Copper, dilute HNO₃3Cu + 8HNO₃ → 3Cu(NO₃)₂ + 2NO + 4H₂ONO (+2)
Copper, concentrated HNO₃Cu + 4HNO₃ → Cu(NO₃)₂ + 2NO₂ + 2H₂ONO₂ (+4)
Magnesium (or zinc), dilute HNO₃4Mg + 10HNO₃ → 4Mg(NO₃)₂ + N₂O + 5H₂ON₂O (+1)
Magnesium (or zinc), more dilute HNO₃4Mg + 10HNO₃ → 4Mg(NO₃)₂ + NH₄NO₃ + 3H₂ONH₄⁺ (−3)
Zinc, concentrated HNO₃Zn + 4HNO₃ → Zn(NO₃)₂ + 2NO₂ + 2H₂ONO₂ (+4)
OxideOxidation state of NNatureA preparation
Nitrous oxide N₂O+1Colourless gas, neutralNH₄NO₃ → N₂O + 2H₂O on heating
Nitric oxide NO+2Colourless gas, neutral2NaNO₂ + 2FeSO₄ + 3H₂SO₄ → Fe₂(SO₄)₃ + 2NaHSO₄ + 2H₂O + 2NO
Dinitrogen trioxide N₂O₃+3Blue solid, acidicNO + NO₂ → N₂O₃ at low temperature
Nitrogen dioxide NO₂+4Brown gas, acidic2Pb(NO₃)₂ → 2PbO + 4NO₂ + O₂
Dinitrogen tetroxide N₂O₄+4Colourless, acidic2NO₂ ⇌ N₂O₄ on cooling
Dinitrogen pentoxide N₂O₅+5Colourless solid, acidic2HNO₃ + P₂O₅ → N₂O₅ + 2HPO₃
OxoacidFormulaOxidation state of NA preparation
Hyponitrous acidH₂N₂O₂+1Ag₂N₂O₂ + 2HCl → 2AgCl + H₂N₂O₂
Nitrous acidHNO₂+3Ba(NO₂)₂ + H₂SO₄ → 2HNO₂ + BaSO₄
Nitric acidHNO₃+5Ostwald process
Pernitrous acidHOONO+3H₂O₂ + HNO₂ (textbook route)
Pernitric acidHNO₄+5H₂O₂ + N₂O₅ (textbook route)

Key takeaways: HNO₃ is made from a nitrate + H₂SO₄ or by the Ostwald process (NH₃ → NO → NO₂ → HNO₃). It oxidises non-metals to their highest oxoacids, nitrates benzene via NO₂⁺, and with metals gives NO₂ (concentrated), NO, N₂O or NH₄NO₃ (more dilute, more active metal). Nitrogen shows every oxidation state from +1 to +5 in its oxides.

Read the full lesson

Lesson 3

Phosphorus: allotropes, phosphine, chlorides, oxides and oxoacids

White and red phosphorus

  • White (yellow) phosphorus
    • Discrete P₄ tetrahedra
    • Poisonous, garlic smell
    • Glows in the dark (phosphorescence)
    • Very low ignition temperature: catches fire in air
    • Turns pale yellow on standing as a red layer forms
  • Red phosphorus
    • P₄ units linked into polymeric chains
    • Not poisonous, no glow
    • Does not ignite at low temperature
    • Made by heating white P without air and light
    • Used in safety matches
OxoacidFormulaOxidation state of PP–OH / P–HBasicityPreparation
HypophosphorousH₃PO₂+11 / 21P₄ + 3NaOH + 3H₂O route (via NaH₂PO₂)
OrthophosphorousH₃PO₃+32 / 12P₄O₆ + 6H₂O → 4H₃PO₃
HypophosphoricH₄P₂O₆+44 / 04Controlled oxidation of P
OrthophosphoricH₃PO₄+53 / 03P₄O₁₀ + 6H₂O → 4H₃PO₄
PyrophosphoricH₄P₂O₇+54 / 042H₃PO₄ → H₄P₂O₇ + H₂O on heating

Basicity of a phosphorus oxoacid = number of P–OH groups. P–H bonds are not acidic and make the acid reducing (H₃PO₂, H₃PO₃).

Key takeaways: white P (P₄, reactive, poisonous) and red P (polymeric, safe) differ in structure. PH₃ is pyramidal (93.5°), weakly basic and spontaneously flammable when impure. PCl₃ hydrolyses to H₃PO₃, PCl₅ to H₃PO₄ via POCl₃. P₄O₁₀ = P₄O₆ cage + four terminal O. Basicity counts only P–OH.

Read the full lesson

Lesson 4

Group 16: oxygen, ozone, sulphur, sulphur dioxide and sulphuric acid

Sulphur on heating and cooling

  1. Rhombic (α) sulphur Yellow crystals of S₈ rings; the only stable form at room temperature
  2. Monoclinic (β) sulphur Above about 96 °C; long needle-like prisms of S₈ (some S₆); stable up to its melting point near 119 °C
  3. Liquid sulphur A mobile pale yellow liquid when first melted
  4. Plastic (γ) sulphur Molten sulphur poured into cold water: soft, rubbery ribbons that slowly harden back to rhombic

Contact process

  1. Make SO₂ Burn sulphur or iron pyrites in air
  2. Oxidise to SO₃ 2SO₂ + O₂ ⇌ 2SO₃ over V₂O₅ (or platinised asbestos); textbook conditions about 2 bar and 720 K
  3. Absorb SO₃ in concentrated H₂SO₄ SO₃ + H₂SO₄ → H₂S₂O₇ (oleum)
  4. Dilute oleum H₂S₂O₇ + H₂O → 2H₂SO₄; acid over 96% pure
NameFormulaNote
Sulphurous acidH₂SO₃Known mainly as its salts
Sulphuric acidH₂SO₄Most important
Thiosulphuric acidH₂S₂O₃One O of H₂SO₄ replaced by S
Dithionous acidH₂S₂O₄S–S bond
Disulphurous (pyrosulphurous) acidH₂S₂O₅S–S bond
Disulphuric (pyrosulphuric) acidH₂S₂O₇Oleum; S–O–S link
Peroxomonosulphuric acid (Caro's acid)H₂SO₅Contains –O–O–
Peroxodisulphuric acid (Marshall's acid)H₂S₂O₈Contains –O–O– between two S
Dithionic acidH₂S₂O₆S–S bond
Polythionic acidsH₂Sₙ₊₂O₆Chain of S atoms

Key takeaways: O₂ is paramagnetic; O₃ (bent, by silent discharge) is a strong oxidant estimated with KI. Rhombic sulphur is stable below about 96 °C. SO₂ is acidic, reducing (bleaches temporarily, decolourises KMnO₄) and can oxidise H₂S. Contact process: SO₂ → SO₃ (V₂O₅) → oleum → H₂SO₄. Sulphuric acid is a dibasic acid, a dehydrating agent and, hot and concentrated, an oxidant.

Read the full lesson

Lesson 5

Halogens, hydrogen halides, interhalogens and the noble gases

PropertyHFHClHBrHI
Bond dissociation enthalpy (kJ mol⁻¹, textbook)562431366299
Thermal stabilityHighestHighLowerLowest (decomposes on heating)
Boiling pointHighest (hydrogen bonding)LowestHigher than HClHigher than HBr
Acid strength in waterWeakStrongStrongerStrongest
TypeBond pairs / lone pairs on AHybridisationShape
AX (ClF)1 / 3sp³Linear
AX₃ (ClF₃)3 / 2sp³dT-shaped
AX₅ (BrF₅)5 / 1sp³d²Square pyramidal
AX₇ (IF₇)7 / 0sp³d³Pentagonal bipyramidal
Shapes from table 3.11 of the Tamil Nadu textbook
CompoundBond pairs / lone pairs on XeHybridisationShape
XeF₂2 / 3sp³dLinear
XeF₄4 / 2sp³d²Square planar
XeF₆6 / 1sp³d³Distorted octahedron
XeOF₂3 / 2sp³dT-shaped
XeOF₄5 / 1sp³d²Square pyramidal
XeO₃3 / 1sp³Pyramidal
Noble gasUses (from the Tamil Nadu textbook)
HeliumWith oxygen for divers (prevents 'the bends'); inert atmosphere for arc welding; cryogenics (lowest boiling point); filling balloons
NeonNeon advertising signs (red glow at low pressure)
ArgonFilament bulbs: stops the hot filament from oxidising
KryptonFluorescent and flash bulbs; airport approach lights that penetrate fog
XenonFluorescent and flash bulbs, lasers, high-speed photographic flash
RadonRadioactive; a source of gamma rays in sealed capsules for cancer treatment

Key takeaways: chlorine comes from oxidising chlorides (MnO₂, KMnO₄) or electrolysing brine; it disproportionates in alkali and bleaches permanently. HX: stability and bond strength fall from HF to HI, acid strength and reducing power rise; HF boils highest. Interhalogens AXn have the larger halogen in the centre; count pairs to get the shape. Xenon fluorides hydrolyse to XeO₃; perxenate is a powerful oxidant.

Read the full lesson

Privacy · Terms · Refunds · Delivery