• Practice
  • About 26 min
  • 5 practice questions

Phosphorus: allotropes, phosphine, chlorides, oxides and oxoacids

Compare white and red phosphorus, write the reactions of phosphorus, prepare phosphine and describe its properties and shape, give the chemistry of PCl₃ and PCl₅, and work out the structures and basicity of phosphorus oxoacids.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Compare white and red phosphorus and write the main reactions of phosphorus.
  • Prepare phosphine by four methods and write its reactions; explain its 93.5° bond angle.
  • Prepare PCl₃ and PCl₅ and write their hydrolysis and chlorinating reactions.
  • Describe P₄O₆ and P₄O₁₀ and find the oxidation state and basicity of each oxoacid of phosphorus.

Phosphorus is the 11th most abundant element (according to the textbook), essential in bones, DNA and fertilisers. Unlike nitrogen it does not form stable triple bonds; P≡P is less stable than three P–P single bonds, so phosphorus builds P₄ tetrahedra and polymers instead of P₂ molecules.

Allotropes of phosphorus

White and red phosphorus

  • White (yellow) phosphorus
    • Discrete P₄ tetrahedra
    • Poisonous, garlic smell
    • Glows in the dark (phosphorescence)
    • Very low ignition temperature: catches fire in air
    • Turns pale yellow on standing as a red layer forms
  • Red phosphorus
    • P₄ units linked into polymeric chains
    • Not poisonous, no glow
    • Does not ignite at low temperature
    • Made by heating white P without air and light
    • Used in safety matches

Red phosphorus turns back into white phosphorus if it is vaporised in an inert atmosphere and the vapour condensed under water. Black phosphorus has a layered structure and is a semiconductor; scarlet and violet forms are also known.

Reactions of phosphorus

  • Oxygen: P₄ + 3O₂ → P₄O₆ (phosphorus trioxide); P₄ + 5O₂ → P₄O₁₀ (pentoxide). White P catches fire in air giving dense white fumes.
  • Chlorine: P₄ + 6Cl₂ → 4PCl₃; P₄ + 10Cl₂ → 4PCl₅ (white P reacts violently at room temperature, red P on heating).
  • Alkali: white P boiled with NaOH in an inert atmosphere, P₄ + 3NaOH + 3H₂O → 3NaH₂PO₂ + PH₃; phosphorus is both oxidised (to +1) and reduced (to −3).
  • Concentrated nitric acid (iodine catalyst): P₄ + 20HNO₃ → 4H₃PO₄ + 20NO₂ + 4H₂O.
  • Metals: P₄ + 6Mg → 2Mg₃P₂; P₄ + 6Ca → 2Ca₃P₂; P₄ + 12Na → 4Na₃P.

Uses: red phosphorus in match boxes; alloys such as phosphor bronze.

Phosphine, PH₃

  • White phosphorus with NaOH in CO₂ or H₂ (above). P₂H₄ formed alongside is removed in a freezing mixture.
  • Hydrolysis of phosphides: Ca₃P₂ + 6H₂O → 3Ca(OH)₂ + 2PH₃; AlP + 3HCl → AlCl₃ + PH₃.
  • Pure phosphine from heating phosphorous acid: 4H₃PO₃ → 3H₃PO₄ + PH₃ (check: P 4 = 3 + 1; H 12 = 9 + 3; O 12 = 12).
  • Pure phosphine from phosphonium iodide: PH₄I + NaOH → PH₃ + NaI + H₂O.

Properties: a colourless, poisonous gas smelling of rotten fish, slightly soluble in water and neutral to litmus. On heating without air it decomposes, 4PH₃ → P₄ + 6H₂. It burns in air or oxygen, 4PH₃ + 8O₂ → P₄O₁₀ + 6H₂O, and the oxide takes up water, P₄O₁₀ + 2H₂O → 4HPO₃ (metaphosphoric acid). It is a weak base, PH₃ + HI → PH₄I, and phosphonium iodide gives PH₃ back with water. With chlorine, PH₃ + 4Cl₂ → PCl₅ + 3HCl. It precipitates phosphides: 3AgNO₃ + PH₃ → Ag₃P + 3HNO₃. As a Lewis base it forms Cl₃B←PH₃.

Structure: P is sp³ with one lone pair, so PH₃ is pyramidal, but its bond angle is only 93.5°, much smaller than NH₃'s 107°. Phosphorus is larger and less electronegative than nitrogen, so the bonding pairs sit farther from P and repel each other less; the lone pair dominates and the bonds close up.

Uses: smoke screens; Holmes signal: a pierced container of calcium carbide and calcium phosphide thrown into the sea releases acetylene and phosphine; phosphine ignites spontaneously and sets the acetylene burning, signalling to ships.

Phosphorus trichloride and pentachloride

PCl₃: made by passing a slow stream of chlorine over white phosphorus, or P₄ + 8SOCl₂ → 4PCl₃ + 4SO₂ + 2S₂Cl₂ (check: S 8 = 4 + 4; O 8 = 8; Cl 16 = 12 + 4). Cold water hydrolyses it, PCl₃ + 3H₂O → H₃PO₃ + 3HCl, by water attaching to a vacant 3d orbital of P and HCl leaving, three times over, like SiCl₄. Alcohols and acids react similarly: 3C₂H₅OH + PCl₃ → 3C₂H₅Cl + H₃PO₃; 3CH₃COOH + PCl₃ → 3CH₃COCl + H₃PO₃. Used as a chlorinating agent and to make H₃PO₃.

PCl₅: made from PCl₃ and excess Cl₂, PCl₃ + Cl₂ → PCl₅. Heating reverses this: PCl₅ ⇌ PCl₃ + Cl₂. Water first gives phosphoryl chloride, PCl₅ + H₂O → POCl₃ + 2HCl, then POCl₃ + 3H₂O → H₃PO₄ + 3HCl; overall PCl₅ + 4H₂O → H₃PO₄ + 5HCl. With metals: 2Ag + PCl₅ → 2AgCl + PCl₃; Sn + 2PCl₅ → SnCl₄ + 2PCl₃. It replaces –OH by –Cl: C₂H₅OH + PCl₅ → C₂H₅Cl + POCl₃ + HCl.

Oxides of phosphorus

In P₄O₆, four P atoms sit at the corners of a tetrahedron with six O atoms bridging the six edges. The P–O distance (165.6 pm, textbook value) is shorter than a single P–O bond, which the textbook attributes to some pπ–dπ double-bond character. P₄O₁₀ has the same cage plus one extra terminal oxygen on each P (four P=O, about 143 pm, shorter still).

Oxoacids of phosphorus and their basicity

Only H atoms attached to oxygen (P–OH) are acidic; H atoms bonded directly to P (P–H) are not. So basicity = number of P–OH groups, and any P–H bond makes the acid a reducing agent.

OxoacidFormulaOxidation state of PP–OH / P–HBasicityPreparation
HypophosphorousH₃PO₂+11 / 21P₄ + 3NaOH + 3H₂O route (via NaH₂PO₂)
OrthophosphorousH₃PO₃+32 / 12P₄O₆ + 6H₂O → 4H₃PO₃
HypophosphoricH₄P₂O₆+44 / 04Controlled oxidation of P
OrthophosphoricH₃PO₄+53 / 03P₄O₁₀ + 6H₂O → 4H₃PO₄
PyrophosphoricH₄P₂O₇+54 / 042H₃PO₄ → H₄P₂O₇ + H₂O on heating

Worked example 1: normality from basicity

A 2 M solution of H₃PO₄ is how many normal? Working: H₃PO₄ has three P–OH groups, so basicity 3. Normality = molarity × basicity = 2 × 3 = 6 N. For 2 M H₃PO₃ (basicity 2) the answer would be 4 N, and for H₃PO₂ (basicity 1), 2 N.

Worked example 2: oxidation state and basicity of pyrophosphorous acid

H₄P₂O₅ has the structure HO(H)P(O)–O–P(O)(H)OH. Oxidation state: 4(+1) + 2x + 5(−2) = 0, so 2x = 6 and x = +3. Two H are on P, two on O, so the basicity is 2.

Basicity of a phosphorus oxoacid = number of P–OH groups. P–H bonds are not acidic and make the acid reducing (H₃PO₂, H₃PO₃).

Key takeaways: white P (P₄, reactive, poisonous) and red P (polymeric, safe) differ in structure. PH₃ is pyramidal (93.5°), weakly basic and spontaneously flammable when impure. PCl₃ hydrolyses to H₃PO₃, PCl₅ to H₃PO₄ via POCl₃. P₄O₁₀ = P₄O₆ cage + four terminal O. Basicity counts only P–OH.

Check your understanding

  1. 1. Solid A reacts with hot concentrated NaOH, giving a foul-smelling gas B that catches fire in air. A and B are

    1. red P₄ and PH₃
    2. white P₄ and PH₃
    3. S₈ and H₂S
    4. white P₄ and H₂S
    Show answer

    Answer: B. White phosphorus boiled with NaOH gives phosphine: P₄ + 3NaOH + 3H₂O → 3NaH₂PO₂ + PH₃. Phosphine (with traces of P₂H₄) catches fire in air. Red phosphorus does not react this way.

  2. 2. On hydrolysis, PCl₃ gives

    1. H₃PO₃
    2. PH₃
    3. H₃PO₄
    4. POCl₃
    Show answer

    Answer: A. PCl₃ + 3H₂O → H₃PO₃ + 3HCl; phosphorus stays at +3. PCl₅ would give POCl₃ and then H₃PO₄.

  3. 3. The basicity of H₃PO₃ is

    1. 1
    2. 3
    3. 2
    4. 0
    Show answer

    Answer: C. H₃PO₃ is HP(O)(OH)₂: two P–OH groups and one P–H. Only P–OH hydrogens ionise, so the basicity is 2.

  4. 4. Why is the bond angle in PH₃ (93.5°) smaller than in NH₃ (107°)?

    1. PH₃ has two lone pairs.
    2. P is sp² hybridised.
    3. PH₃ is planar.
    4. P is larger and less electronegative, so bond pairs are farther from P and repel less.
    Show answer

    Answer: D. Both molecules are pyramidal with one lone pair. In PH₃ the bond pairs lie farther from the larger, less electronegative P atom, so bond pair–bond pair repulsion is weaker and the lone pair pushes the bonds closer.

  5. 5. How many moles of HCl form when 0.5 mol of PCl₅ is completely hydrolysed?

    1. 2.5 mol
    2. 2 mol
    3. 4 mol
    4. 5 mol
    Show answer

    Answer: A. Overall PCl₅ + 4H₂O → H₃PO₄ + 5HCl, so 0.5 mol gives 0.5 × 5 = 2.5 mol HCl (all five Cl atoms end up as HCl).

Privacy · Terms · Refunds · Delivery