- Practice
- About 30 min
- 5 practice questions
Halogens, hydrogen halides, interhalogens and the noble gases
Prepare chlorine and hydrochloric acid and write their reactions, explain the trends in hydrogen halides, predict the shapes of interhalogens and xenon compounds by VSEPR, name halogen oxides and oxoacids, and list uses of the noble gases.
If something looks wrong, please tell us.
By the end of this lesson you can
- Prepare chlorine in the laboratory and industrially, and write its reactions with metals, water, ammonia, alkalis and reducing agents.
- Prepare HCl and describe aqua regia; explain the trends in thermal stability, boiling point and acid strength of HX.
- Predict the shapes of interhalogens and xenon compounds by counting electron pairs.
- Write the preparation and reactions of xenon fluorides and list uses of the noble gases.
The halogens are too reactive to occur free: fluorine is found in fluorspar, cryolite and fluorapatite; chlorine, bromine and iodine as halides, mainly in sea water. The noble gases, once thought completely inert, turned out to form real compounds, especially xenon.
Chlorine
- Laboratory: a chloride with concentrated H₂SO₄ and MnO₂, 4NaCl + MnO₂ + 4H₂SO₄ → MnCl₂ + 4NaHSO₄ + 2H₂O + Cl₂ (check: Na 4; Cl 4 = 2 + 2; S 4; O 18 = 16 + 2; H 8 = 4 + 4).
- Oxidising HCl: MnO₂ + 4HCl → MnCl₂ + 2H₂O + Cl₂; PbO₂ + 4HCl → PbCl₂ + 2H₂O + Cl₂; 2KMnO₄ + 16HCl → 2KCl + 2MnCl₂ + 8H₂O + 5Cl₂; K₂Cr₂O₇ + 14HCl → 2KCl + 2CrCl₃ + 7H₂O + 3Cl₂.
- Bleaching powder with acid: CaOCl₂ + 2HCl → CaCl₂ + H₂O + Cl₂.
- Electrolysis of brine (industry): at the anode 2Cl⁻ → Cl₂ + 2e⁻; at the cathode water is reduced, 2H₂O + 2e⁻ → H₂ + 2OH⁻; Na⁺ and OH⁻ remain as NaOH.
- Deacon's process: 4HCl + O₂ → 2H₂O + 2Cl₂ over CuCl₂ at about 723 K; the dilute chlorine is used for bleaching powder.
Chlorine is a greenish-yellow, poisonous gas with a choking smell, about 2.5 times heavier than air; it gives yellow crystals of chlorine hydrate Cl₂·8H₂O from chlorine water, and liquefies at −34.6 °C.
- Metals and non-metals: 2Na + Cl₂ → 2NaCl; 2Fe + 3Cl₂ → 2FeCl₃; 2Al + 3Cl₂ → 2AlCl₃; Cu + Cl₂ → CuCl₂; H₂ + Cl₂ → 2HCl; 2S + Cl₂ → S₂Cl₂; P₄ + 6Cl₂ → 4PCl₃; 2Sb + 3Cl₂ → 2SbCl₃.
- Affinity for hydrogen: turpentine burns in chlorine, C₁₀H₁₆ + 8Cl₂ → 10C + 16HCl; chlorine water in sunlight, 2Cl₂ + 2H₂O → 4HCl + O₂.
- Ammonia: excess NH₃ gives N₂ + NH₄Cl, excess Cl₂ gives NCl₃ (lesson 1).
- Alkali: cold dilute, Cl₂ + 2NaOH → NaCl + NaOCl + H₂O; hot concentrated, 3Cl₂ + 6NaOH → 5NaCl + NaClO₃ + 3H₂O (disproportionation: Cl 0 → −1 and +1 or +5).
- Oxidising and bleaching: Cl₂ + H₂O → HCl + HOCl; HOCl → HCl + [O]; the nascent oxygen oxidises colouring matter, so chlorine bleaching is permanent. It oxidises Fe²⁺ to Fe³⁺ (2FeSO₄ + H₂SO₄ + Cl₂ → Fe₂(SO₄)₃ + 2HCl), sulphite to sulphate (Na₂SO₃ + H₂O + Cl₂ → Na₂SO₄ + 2HCl) and H₂S to S, and displaces Br₂ and I₂: Cl₂ + 2KBr → 2KCl + Br₂.
- Bleaching powder: Ca(OH)₂ + Cl₂ → CaOCl₂ + H₂O.
- Addition and substitution: SO₂ + Cl₂ → SO₂Cl₂; CO + Cl₂ → COCl₂; C₂H₄ + Cl₂ → C₂H₄Cl₂; CH₄ + Cl₂ → CH₃Cl + HCl; C₆H₆ + Cl₂ → C₆H₅Cl + HCl (FeCl₃).
Uses: purifying drinking water; bleaching cotton, paper and rayon; extracting gold and platinum.
Hydrochloric acid and aqua regia
HCl is made from NaCl and concentrated H₂SO₄ (NaCl + H₂SO₄ → NaHSO₄ + HCl; at higher temperature NaHSO₄ + NaCl → Na₂SO₄ + HCl) and dried with concentrated H₂SO₄. It is a colourless, pungent gas, extremely soluble in water: HCl + H₂O → H₃O⁺ + Cl⁻. It gives H₂ with active metals (Zn + 2HCl → ZnCl₂ + H₂), CO₂ with carbonates and bicarbonates (CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O; NaHCO₃ + HCl → NaCl + CO₂ + H₂O) and SO₂ with sulphites. Aqua regia is 3 parts concentrated HCl to 1 part concentrated HNO₃; it dissolves gold and platinum: Au + 4H⁺ + NO₃⁻ + 4Cl⁻ → [AuCl₄]⁻ + NO + 2H₂O (check: O 3 = 1 + 2; H 4 = 4; charge 4 − 1 − 4 = −1).
Trends in the hydrogen halides
| Property | HF | HCl | HBr | HI |
|---|---|---|---|---|
| Bond dissociation enthalpy (kJ mol⁻¹, textbook) | 562 | 431 | 366 | 299 |
| Thermal stability | Highest | High | Lower | Lowest (decomposes on heating) |
| Boiling point | Highest (hydrogen bonding) | Lowest | Higher than HCl | Higher than HBr |
| Acid strength in water | Weak | Strong | Stronger | Strongest |
- Thermal stability: HF > HCl > HBr > HI, following bond strength.
- Boiling point: HCl < HBr < HI < HF; HF is anomalously high because of strong hydrogen bonds.
- Acid strength: HF < HCl < HBr < HI. HF is weak because the H–F bond is very strong; in concentrated solution HF + F⁻ ⇌ HF₂⁻ removes fluoride and raises the acidity, and salts such as KHF₂ exist.
- Moist HF attacks glass: SiO₂ + 4HF → SiF₄ + 2H₂O.
- Reducing power rises from HF to HI: HBr reduces H₂SO₄ to SO₂, but HI reduces it all the way to H₂S: 8HI + H₂SO₄ → 4I₂ + H₂S + 4H₂O (check: H 10 = 2 + 8; O 4 = 4).
- HBr and HI cannot be made with concentrated H₂SO₄ (they would be oxidised). Instead: 2P + 3X₂ → 2PX₃, then PX₃ + 3H₂O → H₃PO₃ + 3HX (X = Br, I).
Interhalogen compounds
Two different halogens combine to form AB, AB₃, AB₅ or AB₇, where A is the larger, less electronegative halogen: ClF, BrF, IF, BrCl, ICl, IBr; ClF₃, BrF₃, IF₃, ICl₃; BrF₅, IF₅; IF₇. Only two halogens take part, fluorine is never the central atom, and the small, very electronegative F atoms let the central atom reach high coordination numbers. Interhalogens are strong oxidising agents, self-ionise (2ICl ⇌ I⁺ + ICl₂⁻; 2ICl₃ ⇌ ICl₂⁺ + ICl₄⁻) and are hydrolysed by alkali so that the larger halogen forms an oxyanion and the smaller a halide: BrF₅ + 6OH⁻ → BrO₃⁻ + 5F⁻ + 3H₂O; ICl + 2OH⁻ → OI⁻ + Cl⁻ + H₂O.
| Type | Bond pairs / lone pairs on A | Hybridisation | Shape |
|---|---|---|---|
| AX (ClF) | 1 / 3 | sp³ | Linear |
| AX₃ (ClF₃) | 3 / 2 | sp³d | T-shaped |
| AX₅ (BrF₅) | 5 / 1 | sp³d² | Square pyramidal |
| AX₇ (IF₇) | 7 / 0 | sp³d³ | Pentagonal bipyramidal |
Worked example 1: the shape of BrF₃ by electron counting
Working: Br has 7 valence electrons; 3 are used to bond to 3 F atoms, leaving 4 electrons = 2 lone pairs. Total pairs = 3 bond + 2 lone = 5, so the hybridisation is sp³d (trigonal bipyramidal arrangement). The two lone pairs take equatorial positions to minimise repulsion, leaving the three F atoms in a T shape.
Oxides and oxoacids of halogens
Fluorine forms OF₂ and O₂F₂, in which fluorine is −1 (it is the more electronegative element). Chlorine forms Cl₂O (+1), ClO₂ (+4), Cl₂O₆ (+6) and Cl₂O₇ (+7); bromine forms Br₂O and BrO₂; iodine forms I₂O₅ (+5), I₂O₄ and I₄O₉. Chlorine has four oxoacids: HOCl (+1, hypochlorous), HClO₂ (+3, chlorous), HClO₃ (+5, chloric) and HClO₄ (+7, perchloric); fluorine forms only HOF. Acid strength rises with the number of oxygen atoms, HOCl < HClO₂ < HClO₃ < HClO₄, while oxidising power follows the reverse order, HOX > HXO₂ > HXO₃ > HXO₄ (as given in the textbook).
Group 18: the noble gases
All the noble gases occur in the atmosphere. Down the group (He to Rn), atomic radius and boiling point increase and first ionisation energy decreases; each has the highest ionisation energy of its period because of its filled outer shell. They are monatomic, colourless, odourless, non-flammable and highly unreactive. Sir William Ramsay discovered several of them and received the Nobel Prize in Chemistry in 1904.
- Xenon fluorides by direct reaction with fluorine over nickel at about 400 °C: Xe + F₂ → XeF₂; Xe + 2F₂ → XeF₄; Xe + 3F₂ → XeF₆ (at about 200 atm).
- Hydrolysis: XeF₆ + 3H₂O → XeO₃ + 6HF (complete hydrolysis gives XeO₃).
- With silica (quartz): 2XeF₆ + SiO₂ → 2XeOF₄ + SiF₄; continued, 2XeOF₄ + SiO₂ → 2XeO₂F₂ + SiF₄, then 2XeO₂F₂ + SiO₂ → 2XeO₃ + SiF₄.
- With 2.5 M NaOH, XeF₆ gives sodium perxenate, a very strong oxidant: 2XeF₆ + 16NaOH → Na₄XeO₆ + Xe + O₂ + 12NaF + 8H₂O. Perxenate oxidises Mn²⁺ to MnO₄⁻ without a catalyst: 5XeO₆⁴⁻ + 2Mn²⁺ + 14H⁺ → 2MnO₄⁻ + 5XeO₃ + 7H₂O.
- Xe + PtF₆ → Xe⁺[PtF₆]⁻, an orange-yellow solid (the first noble-gas compound). Xenon fluorides form adducts such as XeF₂·2SbF₅ and XeF₆·BF₃. Krypton forms KrF₂ when Kr and F₂ are subjected to an electric discharge at very low temperature.
| Compound | Bond pairs / lone pairs on Xe | Hybridisation | Shape |
|---|---|---|---|
| XeF₂ | 2 / 3 | sp³d | Linear |
| XeF₄ | 4 / 2 | sp³d² | Square planar |
| XeF₆ | 6 / 1 | sp³d³ | Distorted octahedron |
| XeOF₂ | 3 / 2 | sp³d | T-shaped |
| XeOF₄ | 5 / 1 | sp³d² | Square pyramidal |
| XeO₃ | 3 / 1 | sp³ | Pyramidal |
Worked example 2: balancing the perxenate oxidation
In 5XeO₆⁴⁻ + 2Mn²⁺ + 14H⁺ → 2MnO₄⁻ + 5XeO₃ + 7H₂O: Xe goes +8 → +6 (gains 2 e⁻), Mn goes +2 → +7 (loses 5 e⁻). LCM 10: 5 Xe and 2 Mn. Atom check: O 30 = 8 + 15 + 7; H 14 = 14. Charge: 5(−4) + 2(+2) + 14(+1) = −20 + 4 + 14 = −2, and 2(−1) = −2. Balanced.
| Noble gas | Uses (from the Tamil Nadu textbook) |
|---|---|
| Helium | With oxygen for divers (prevents 'the bends'); inert atmosphere for arc welding; cryogenics (lowest boiling point); filling balloons |
| Neon | Neon advertising signs (red glow at low pressure) |
| Argon | Filament bulbs: stops the hot filament from oxidising |
| Krypton | Fluorescent and flash bulbs; airport approach lights that penetrate fog |
| Xenon | Fluorescent and flash bulbs, lasers, high-speed photographic flash |
| Radon | Radioactive; a source of gamma rays in sealed capsules for cancer treatment |
Key takeaways: chlorine comes from oxidising chlorides (MnO₂, KMnO₄) or electrolysing brine; it disproportionates in alkali and bleaches permanently. HX: stability and bond strength fall from HF to HI, acid strength and reducing power rise; HF boils highest. Interhalogens AXn have the larger halogen in the centre; count pairs to get the shape. Xenon fluorides hydrolyse to XeO₃; perxenate is a powerful oxidant.
Check your understanding
-
1. Chlorine with hot concentrated NaOH gives
- NaCl and NaOCl
- NaCl, NaClO₃ and water
- NaClO₄ only
- NaOCl and H₂
Show answer
Answer: B. 3Cl₂ + 6NaOH(hot, conc.) → 5NaCl + NaClO₃ + 3H₂O. Cold dilute NaOH gives NaCl and NaOCl instead.
-
2. The correct order of thermal stability of the hydrogen halides is
- HI > HBr > HCl > HF
- HCl > HF > HBr > HI
- HF > HCl > HBr > HI
- HI > HCl > HF > HBr
Show answer
Answer: C. Thermal stability follows bond dissociation enthalpy, which is greatest for HF and least for HI, so HF > HCl > HBr > HI.
-
3. What is the hybridisation of iodine in IF₇ and its shape?
- sp³d³, pentagonal bipyramidal
- sp³d², octahedral
- sp³d, trigonal bipyramidal
- sp³, tetrahedral
Show answer
Answer: A. Iodine uses all 7 valence electrons to bond to 7 F: 7 bond pairs, no lone pairs, 7 orbitals, sp³d³, pentagonal bipyramidal.
-
4. Which compound is NOT formed?
- XeOF₄
- XeO₃
- XeF₂
- NeF₂
Show answer
Answer: D. Neon has a very high ionisation energy and no accessible d orbitals; no neon compounds are known. Xenon forms XeF₂, XeO₃ and XeOF₄.
-
5. The shape of XeF₄ is
- tetrahedral
- square planar
- see-saw
- square pyramidal
Show answer
Answer: B. Xe has 8 valence electrons; 4 bond to F and 4 remain as 2 lone pairs. Six pairs (sp³d²) take an octahedral arrangement; the two lone pairs sit opposite each other, leaving the four F atoms in a square plane.
Sign in to keep track of the lessons you finish.