• Practice
  • About 28 min
  • 5 practice questions

Group 16: oxygen, ozone, sulphur, sulphur dioxide and sulphuric acid

Prepare oxygen and ozone and compare them, describe the allotropes of sulphur, write the reactions of sulphur dioxide, explain the contact process and the acid, dehydrating and oxidising reactions of sulphuric acid, and name the oxoacids of sulphur.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Prepare oxygen in the laboratory and ozone by electric discharge, and use the KI test for ozone.
  • Describe rhombic, monoclinic and plastic sulphur.
  • Write SO₂'s reactions as an acidic oxide, oxidising agent, reducing agent and bleach.
  • Describe the contact process and write the reactions of sulphuric acid; name the oxoacids of sulphur.

Group 16 elements are called chalcogens (ore-forming), because many ores are oxides or sulphides. Oxygen is the most abundant element in the earth's crust (46.6% by mass, according to the textbook), and sulphuric acid is often called the 'king of chemicals' because so much industry depends on it.

Oxygen

Industrially oxygen comes from the fractional distillation of liquid air. Laboratory methods:

  • Decomposing hydrogen peroxide over MnO₂: 2H₂O₂ → 2H₂O + O₂.
  • Oxidising H₂O₂ with acidified permanganate: 5H₂O₂ + 2MnO₄⁻ + 6H⁺ → 5O₂ + 8H₂O + 2Mn²⁺ (check: O 10 + 8 = 10 + 8; H 10 + 6 = 16; charge −2 + 6 = +4 = 2 × (+2)).
  • Heating oxides or oxoanion salts: 2HgO → 2Hg + O₂; 2BaO₂ → 2BaO + O₂; 2KClO₃ → 2KCl + 3O₂ (MnO₂ catalyst); 2KNO₃ → 2KNO₂ + O₂.

Oxygen is a diatomic, paramagnetic gas and, like N and F, forms strong hydrogen bonds. It combines with most metals and non-metals; s-block metals react at room temperature, and some less reactive metals react only when very finely divided (pyrophoric powders). Uses: respiration, oxy-acetylene welding, liquid oxygen in rockets.

Ozone, O₃

Ozone forms in the upper atmosphere by the action of ultraviolet light. In the laboratory a silent electric discharge through oxygen converts part of it (about 10% at 20,000 V, according to the textbook) into ozone, giving 'ozonised oxygen'; fractional distillation of the liquefied mixture gives pure ozone, a pale blue gas: O₂ → 2O; O₂ + O → O₃; overall 3O₂ → 2O₃. The O₃ molecule is bent and symmetrical, with delocalised bonding. Ozone is a far more powerful oxidising agent than O₂ (among common oxidants, second only to fluorine). It oxidises potassium iodide quantitatively, which is used to estimate ozone: O₃ + 2KI + H₂O → 2KOH + I₂ + O₂ (check: O 3 + 1 = 2 + 2; K 2; I 2; H 2).

Allotropes of sulphur

Sulphur on heating and cooling

  1. Rhombic (α) sulphur Yellow crystals of S₈ rings; the only stable form at room temperature
  2. Monoclinic (β) sulphur Above about 96 °C; long needle-like prisms of S₈ (some S₆); stable up to its melting point near 119 °C
  3. Liquid sulphur A mobile pale yellow liquid when first melted
  4. Plastic (γ) sulphur Molten sulphur poured into cold water: soft, rubbery ribbons that slowly harden back to rhombic

Amorphous forms also include milk of sulphur and colloidal sulphur. The vapour over boiling sulphur is mostly S₈, S₇ and S₆, with smaller amounts of S₂ to S₅. (The textbook gives about 140 °C for melting; the established melting point of monoclinic sulphur is about 119 °C.)

Sulphur dioxide, SO₂

Preparation: burning sulphur, S + O₂ → SO₂ (a few per cent becomes SO₃); roasting sulphide ores, 2ZnS + 3O₂ → 2ZnO + 2SO₂ and 4FeS₂ + 11O₂ → 2Fe₂O₃ + 8SO₂ (check: Fe 4; S 8; O 22 = 6 + 16); in the laboratory, copper with hot concentrated H₂SO₄, Cu + 2H₂SO₄ → CuSO₄ + SO₂ + 2H₂O, or a sulphite with acid, SO₃²⁻ + 2H⁺ → H₂O + SO₂.

Properties: a colourless gas with a suffocating smell, about 2.2 times as heavy as air (64 ÷ 29 ≈ 2.2), very soluble in water and easily liquefied. Volcanoes, coal- and oil-burning power plants and copper smelters release it.

  • Acidic oxide: SO₂ + H₂O ⇌ H₂SO₃ ⇌ 2H⁺ + SO₃²⁻. With NaOH: SO₂ + NaOH → NaHSO₃; with Na₂CO₃: 2SO₂ + Na₂CO₃ + H₂O → 2NaHSO₃ + CO₂.
  • Oxidising agent (S +4 → 0): 2H₂S + SO₂ → 3S + 2H₂O; 2Mg + SO₂ → 2MgO + S.
  • Reducing agent (S +4 → +6): SO₂ + 2H₂O + Cl₂ → H₂SO₄ + 2HCl; 2KMnO₄ + 5SO₂ + 2H₂O → K₂SO₄ + 2MnSO₄ + 2H₂SO₄ (decolourises permanganate); K₂Cr₂O₇ + 3SO₂ + H₂SO₄ → K₂SO₄ + Cr₂(SO₄)₃ + H₂O (orange to green).
  • With oxygen: 2SO₂ + O₂ ⇌ 2SO₃ over V₂O₅ at about 450 °C (contact process).
  • Bleaching by reduction: SO₂ + 2H₂O → H₂SO₄ + 2[H]; coloured matter + 2[H] → colourless. Air slowly re-oxidises the product, so SO₂ bleaching is temporary. Used for wool, silk and straw, and to disinfect crops.

Structure: S is sp² hybridised; SO₂ is bent with a lone pair on S; the textbook describes the S=O double bonding as involving pπ–dπ overlap.

Worked example 1: balancing SO₂ with permanganate

Working: Mn goes +7 → +2 (gains 5 e⁻); S goes +4 → +6 (loses 2 e⁻). LCM 10: 2 MnO₄⁻ and 5 SO₂. Then 2KMnO₄ + 5SO₂ gives 2 K, 2 Mn and 5 S; products K₂SO₄ + 2MnSO₄ use 1 + 2 = 3 S, so 2 more S appear as 2H₂SO₄, needing 4 H, i.e. 2H₂O. Result: 2KMnO₄ + 5SO₂ + 2H₂O → K₂SO₄ + 2MnSO₄ + 2H₂SO₄. Oxygen check: 8 + 10 + 2 = 20 and 4 + 8 + 8 = 20.

Sulphuric acid, H₂SO₄: the contact process

Contact process

  1. Make SO₂ Burn sulphur or iron pyrites in air
  2. Oxidise to SO₃ 2SO₂ + O₂ ⇌ 2SO₃ over V₂O₅ (or platinised asbestos); textbook conditions about 2 bar and 720 K
  3. Absorb SO₃ in concentrated H₂SO₄ SO₃ + H₂SO₄ → H₂S₂O₇ (oleum)
  4. Dilute oleum H₂S₂O₇ + H₂O → 2H₂SO₄; acid over 96% pure

SO₃ is absorbed in sulphuric acid rather than water because SO₃ with water forms a fine mist of acid that is hard to condense.

Physical properties

Pure H₂SO₄ is a colourless, viscous liquid (density 1.84 g mL⁻¹ at 298 K), freezing at 283.4 K and boiling at 590 K; extensive hydrogen bonding explains its viscosity and high boiling point. It mixes with water very exothermically, forming hydrates H₂SO₄·H₂O and H₂SO₄·2H₂O. (In the laboratory, always add acid slowly to water, never water to acid.)

Chemical properties

  • Dehydrating agent: it chars sugar, C₁₂H₂₂O₁₁ + H₂SO₄ → 12C + H₂SO₄·11H₂O; HCOOH → CO + H₂O; (COOH)₂ → CO + CO₂ + H₂O.
  • Decomposition at high temperature: H₂SO₄ → H₂O + SO₃.
  • Strong dibasic acid: H₂SO₄ + NaOH → NaHSO₄ + H₂O; H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O; H₂SO₄ + 2NH₃ → (NH₄)₂SO₄.
  • Oxidising agent (hot, concentrated; H₂SO₄ → H₂O + SO₂ + [O]): C + 2H₂SO₄ → CO₂ + 2SO₂ + 2H₂O; S + 2H₂SO₄ → 3SO₂ + 2H₂O; P₄ + 10H₂SO₄ → 4H₃PO₄ + 10SO₂ + 4H₂O; H₂S + H₂SO₄ → S + SO₂ + 2H₂O; 2HBr + H₂SO₄ → Br₂ + SO₂ + 2H₂O; 2HI + H₂SO₄ → I₂ + SO₂ + 2H₂O.
  • Metals: dilute acid gives H₂ with Zn, Al, Sn: Zn + H₂SO₄ → ZnSO₄ + H₂; 2Al + 3H₂SO₄ → Al₂(SO₄)₃ + 3H₂. Hot concentrated acid with Cu or Pb gives SO₂: Cu + 2H₂SO₄ → CuSO₄ + SO₂ + 2H₂O. Gold and platinum do not react.
  • Salts: it displaces more volatile acids: KCl + H₂SO₄ → KHSO₄ + HCl; KNO₃ + H₂SO₄ → KHSO₄ + HNO₃; Na₂CO₃ + H₂SO₄ → Na₂SO₄ + H₂O + CO₂; with bromides it also oxidises: 2NaBr + 3H₂SO₄ → 2NaHSO₄ + Br₂ + SO₂ + 2H₂O.
  • Sulphonation: C₆H₆ + H₂SO₄ → C₆H₅SO₃H + H₂O (benzenesulphonic acid).

Test for sulphate: BaCl₂ solution gives a white precipitate of BaSO₄ (BaCl₂ + H₂SO₄ → BaSO₄ + 2HCl); lead acetate gives white PbSO₄. Uses: fertilisers (ammonium sulphate, superphosphate), other acids (HCl, HNO₃), drying agent, pigments and explosives.

Oxoacids of sulphur

NameFormulaNote
Sulphurous acidH₂SO₃Known mainly as its salts
Sulphuric acidH₂SO₄Most important
Thiosulphuric acidH₂S₂O₃One O of H₂SO₄ replaced by S
Dithionous acidH₂S₂O₄S–S bond
Disulphurous (pyrosulphurous) acidH₂S₂O₅S–S bond
Disulphuric (pyrosulphuric) acidH₂S₂O₇Oleum; S–O–S link
Peroxomonosulphuric acid (Caro's acid)H₂SO₅Contains –O–O–
Peroxodisulphuric acid (Marshall's acid)H₂S₂O₈Contains –O–O– between two S
Dithionic acidH₂S₂O₆S–S bond
Polythionic acidsH₂Sₙ₊₂O₆Chain of S atoms

Worked example 2: SO₂ from copper

What mass of copper gives 1.12 L of SO₂ at STP with hot concentrated H₂SO₄? Use Cu = 63.5. Working: moles of SO₂ = 1.12 ÷ 22.4 = 0.0500 mol. Cu + 2H₂SO₄ → CuSO₄ + SO₂ + 2H₂O gives 1 mol SO₂ per mol Cu, so Cu = 0.0500 mol = 0.0500 × 63.5 = 3.18 g, using 0.100 mol of H₂SO₄.

Key takeaways: O₂ is paramagnetic; O₃ (bent, by silent discharge) is a strong oxidant estimated with KI. Rhombic sulphur is stable below about 96 °C. SO₂ is acidic, reducing (bleaches temporarily, decolourises KMnO₄) and can oxidise H₂S. Contact process: SO₂ → SO₃ (V₂O₅) → oleum → H₂SO₄. Sulphuric acid is a dibasic acid, a dehydrating agent and, hot and concentrated, an oxidant.

Check your understanding

  1. 1. Ozone is estimated quantitatively by its reaction with

    1. potassium iodide
    2. potassium chloride
    3. sulphur dioxide
    4. barium chloride
    Show answer

    Answer: A. O₃ + 2KI + H₂O → 2KOH + I₂ + O₂. The iodine liberated is proportional to the ozone and can be titrated.

  2. 2. The bleaching action of SO₂ is temporary because

    1. SO₂ is an oxidising agent
    2. the reduced, colourless product is re-oxidised by air
    3. SO₂ escapes from the fabric
    4. it acts only in the dark
    Show answer

    Answer: B. SO₂ bleaches by reduction (via nascent hydrogen). Atmospheric oxygen slowly oxidises the colourless product back to the coloured form, unlike chlorine, which bleaches permanently by oxidation.

  3. 3. In the contact process, SO₃ is absorbed in

    1. water
    2. dilute sulphuric acid
    3. sodium hydroxide
    4. concentrated sulphuric acid, forming oleum
    Show answer

    Answer: D. SO₃ + H₂SO₄ → H₂S₂O₇ (oleum), which is then diluted to H₂SO₄. Absorbing SO₃ directly in water forms an acid mist that is hard to condense.

  4. 4. Which reaction shows sulphuric acid acting as a dehydrating agent?

    1. Zn + H₂SO₄ → ZnSO₄ + H₂
    2. C₁₂H₂₂O₁₁ → 12C + 11H₂O (with conc. H₂SO₄)
    3. H₂SO₄ + 2NaOH → Na₂SO₄ + 2H₂O
    4. BaCl₂ + H₂SO₄ → BaSO₄ + 2HCl
    Show answer

    Answer: B. Concentrated H₂SO₄ removes the elements of water from sugar, leaving carbon. The others are a metal reaction, neutralisation and precipitation.

  5. 5. Which form of sulphur is stable at room temperature?

    1. Monoclinic sulphur
    2. Plastic sulphur
    3. Rhombic sulphur
    4. Colloidal sulphur
    Show answer

    Answer: C. Rhombic (α) sulphur is the only thermodynamically stable form at ordinary temperature and pressure; monoclinic is stable only between about 96 °C and its melting point, and plastic sulphur slowly reverts to rhombic.

Privacy · Terms · Refunds · Delivery