- Practice
- About 22 min
- 5 practice questions
CFSE, colour, metal carbonyls, stability and uses of complexes
Decide high spin or low spin from Δo and pairing energy, calculate CFSE, explain colour through d-d transitions, describe bonding in metal carbonyls, use stability constants and list the main uses of complexes.
If something looks wrong, please tell us.
By the end of this lesson you can
- Fill electrons into t₂g and e_g and decide between high spin and low spin by comparing Δo with the pairing energy P.
- Calculate the crystal field stabilisation energy (CFSE) with the textbook's formula.
- Explain why most transition metal complexes are coloured and why d⁰ and d¹⁰ ions give colourless complexes.
- Classify metal carbonyls and describe synergic σ and π bonding.
- Relate stepwise and overall stability constants, and give uses of complexes.
High spin or low spin?
Electrons fill the split d orbitals following Hund's rule. For d¹-d³ in an octahedral field each electron enters a separate t₂g orbital. The fourth electron has a choice: go up to e_g (costing Δo) or pair in t₂g (costing the pairing energy P). If Δo > P, pairing is cheaper: a low spin (spin paired) complex. If Δo < P, the electron goes up: a high spin (spin free) complex. Strong field ligands give large Δo and tend to give low spin complexes.
CFSE = {[n(t₂g)(−0.4) + n(e_g)(0.6)]Δo + n(p)P} − {n'(p)P}, where n(p) is the number of electron pairs in the ligand field and n'(p) the number of pairs in the free (spherical-field) ion. The arrangement with the lower (more negative) CFSE is preferred.
Worked example 1: a d⁶ ion
Illustrative values for an octahedral d⁶ complex: Δo = 23000 cm⁻¹, P = 21000 cm⁻¹. The free d⁶ ion has one pair (n'p = 1). High spin t₂g⁴e_g²: one pair. CFSE = [4(−0.4) + 2(0.6)]Δo + 1P − 1P = (−1.6 + 1.2)Δo = −0.4 × 23000 = −9200 cm⁻¹. Low spin t₂g⁶e_g⁰: three pairs. CFSE = [6(−0.4)]Δo + 3P − 1P = −2.4Δo + 2P = −55200 + 42000 = −13200 cm⁻¹. Low spin is lower in energy, so the complex is low spin and diamagnetic (n = 0), as expected since Δo > P.
Worked example 2: a d⁴ ion with a weak field ligand
Illustrative values: Δo = 13000 cm⁻¹, P = 25000 cm⁻¹; the free d⁴ ion has no pairs. High spin t₂g³e_g¹: CFSE = [3(−0.4) + 1(0.6)]Δo = −0.6 × 13000 = −7800 cm⁻¹. Low spin t₂g⁴e_g⁰: one pair. CFSE = −1.6Δo + P = −20800 + 25000 = +4200 cm⁻¹. High spin is preferred: four unpaired electrons, μs = √(4 × 6) = √24 = 4.90 BM.
For a high spin d⁵ ion (t₂g³e_g²) the CFSE is [3(−0.4) + 2(0.6)]Δo = 0, and for low spin d⁵ (t₂g⁵) it is −2Δo + 2P. The textbook uses iron(III) to show this: the aqua complex is high spin (Δo < P) and the cyanido complex low spin (Δo > P).
Colour and d-d transitions
A substance looks coloured when it absorbs part of visible light; we see the complementary colour of what is absorbed. In a complex, an electron in t₂g absorbs light of energy Δo and jumps to e_g: a d-d transition. [Ti(H₂O)₆]³⁺ (d¹) absorbs most strongly near 20000 cm⁻¹ (about 500 nm, blue-green light) and appears purple. Changing the ligand changes Δo and therefore the colour.
| Light absorbed | Colour seen |
|---|---|
| Violet | Yellow |
| Blue | Orange |
| Green | Red |
| Yellow | Violet |
| Orange | Blue |
| Red | Green |
A d-d transition needs a vacancy in e_g and an electron in t₂g. Ions with d⁰ (Sc³⁺, Ti⁴⁺) or d¹⁰ (Cu⁺, Zn²⁺) configurations cannot do this, so their complexes are colourless. Hydrated Cu²⁺ (d⁹) absorbs orange light and looks blue.
Metal carbonyls
Metal carbonyls contain metal-carbon bonds to neutral CO ligands. The first homoleptic carbonyl, [Ni(CO)₄], was reported by Mond in 1890.
- Mononuclear: one metal atom, e.g. [Ni(CO)₄] tetrahedral, [Fe(CO)₅] trigonal bipyramidal, [Cr(CO)₆] octahedral.
- Polynuclear: two or more metal atoms; homonuclear such as Co₂(CO)₈, Mn₂(CO)₁₀, Fe₃(CO)₁₂, or heteronuclear such as MnCo(CO)₉.
- Non-bridged: only terminal CO (Ni(CO)₄), or terminal CO plus a metal-metal bond: Mn₂(CO)₁₀ is (CO)₅Mn-Mn(CO)₅; Tc₂(CO)₁₀ and Re₂(CO)₁₀ are similar.
- Bridged: some CO bond to two metals at once. Fe₂(CO)₉ has three bridging and six terminal CO; Co₂(CO)₈ exists in one form with only a Co-Co bond and another with two bridging CO.
Bonding: carbon of CO donates a lone pair into an empty metal orbital (M←CO σ bond). This makes the metal electron rich, so a filled metal d orbital pushes electron density back into the empty π* orbital of CO (π back bonding). The two effects reinforce each other (synergic bonding), making the M-C bond strong.
Synergic bonding in a metal carbonyl
- σ donation Lone pair on C of CO enters an empty metal orbital
- Metal becomes electron rich Extra electron density on the metal
- π back donation Filled metal d orbital gives density to empty π* of CO
- CO can donate better Each effect strengthens the other
Then back to step 1: σ donation
Stability of complexes
Thermodynamic stability refers to the free energy change (ΔG) of formation; kinetic stability refers to how fast ligands are replaced: fast-reacting complexes are labile, slow ones inert. For M + nL ⇌ MLn the stability (formation) constant is β = [MLn]/([M][L]ⁿ); a larger β means a more stable complex. Its reciprocal, the instability (dissociation) constant, is α = 1/β. If L is added one at a time, each step has a stepwise constant k₁, k₂ ... and the overall constant is their product.
β = k₁ × k₂ × k₃ × ... × kₙ, so log β = log k₁ + log k₂ + ... + log kₙ; and α = 1/β.
Worked example 3: overall from stepwise constants
For a hypothetical complex ML₂: k₁ = 1.0 × 10⁴ and k₂ = 2.0 × 10³. Working: β = k₁k₂ = (1.0 × 10⁴)(2.0 × 10³) = 2.0 × 10⁷. Check with logs: log β = 4.000 + 3.301 = 7.301, and 10^7.301 = 2.0 × 10⁷. Instability constant α = 1/(2.0 × 10⁷) = 5.0 × 10⁻⁸.
Uses of coordination compounds
- Pigments: phthalo blue, a copper(II) complex, in printing ink and packaging.
- Metallurgy: Mond's process purifies nickel through volatile [Ni(CO)₄]; the MacArthur-Forrest cyanide process dissolves gold and silver as cyanido complexes, e.g. 4Au + 8CN⁻ + O₂ + 2H₂O → 4[Au(CN)₂]⁻ + 4OH⁻, and zinc then displaces the metal: 2[Au(CN)₂]⁻ + Zn → [Zn(CN)₄]²⁻ + 2Au.
- Analysis: Ni²⁺ is estimated as insoluble red [Ni(DMG)₂]; EDTA softens hard water and helps separate lanthanides.
- Catalysts: Wilkinson's catalyst [RhCl(PPh₃)₃] for hydrogenating alkenes; Ziegler-Natta catalyst (TiCl₄ + Al(C₂H₅)₃) for polymerising ethene.
- Electroplating: [Ag(CN)₂]⁻ and [Au(CN)₂]⁻ baths give fine, even deposits.
- Medicine: Ca-EDTA removes lead and some radioactive metal ions from the body; cisplatin, cis-[Pt(NH₃)₂Cl₂], is an anticancer drug that binds to DNA and stops cells dividing.
- Photography: hypo dissolves unexposed AgBr: AgBr + 2Na₂S₂O₃ → Na₃[Ag(S₂O₃)₂] + NaBr (Ag 1 = 1, Br 1 = 1, Na 4 = 3 + 1, S 4 = 4, O 6 = 6).
- Biology: haemoglobin (Fe²⁺ porphyrin, haem) carries oxygen; chlorophyll has Mg²⁺ in a modified porphyrin ring; vitamin B₁₂ has cobalt in a corrin ring; carboxypeptidase, a digestive enzyme, contains zinc.
Key takeaways: Δo > P gives low spin, Δo < P high spin; compare CFSE values. Colour comes from d-d transitions; d⁰ and d¹⁰ complexes are colourless. Carbonyls are held by synergic σ donation and π back bonding. β = product of stepwise k's; α = 1/β; larger β means more stable.
Check your understanding
-
1. For an octahedral d⁴ complex (illustrative values), Δo = 30000 cm⁻¹ and P = 22000 cm⁻¹. Which configuration is preferred?
- t₂g³e_g¹, high spin
- t₂g²e_g², high spin
- t₂g⁴e_g⁰, low spin
- t₂g¹e_g³, low spin
Show answer
Answer: C. Δo is larger than P, so pairing is cheaper than promotion. Check CFSE: high spin = −0.6Δo = −18000 cm⁻¹; low spin = −1.6Δo + P = −48000 + 22000 = −26000 cm⁻¹, which is lower. So t₂g⁴e_g⁰, low spin.
-
2. What is the CFSE of an octahedral d³ ion such as Cr³⁺ (no electron pairs in either field)?
- −0.4Δo
- −0.6Δo
- 0
- −1.2Δo
Show answer
Answer: D. d³ in an octahedral field is t₂g³e_g⁰. CFSE = [3(−0.4) + 0(0.6)]Δo = −1.2Δo. There are no pairs, so no P terms.
-
3. Why is [Zn(H₂O)₆]²⁺ colourless while [Cu(H₂O)₆]²⁺ is blue?
- Zn²⁺ is 3d¹⁰, so no electron can be promoted from t₂g into a vacancy in e_g
- Zn²⁺ has no d electrons at all
- Water is a strong field ligand only for zinc
- Zinc complexes are always tetrahedral
Show answer
Answer: A. A d-d transition needs a vacancy in the e_g set. Zn²⁺ (3d¹⁰) has both sets full, so no visible light is absorbed. Cu²⁺ (3d⁹) has one vacancy in e_g; it absorbs orange light and looks blue.
-
4. Which statement about bonding in metal carbonyls is correct?
- CO donates electrons only through its π orbitals
- The metal donates d electron density into the empty π* orbital of CO
- The M-C bond is purely ionic
- Bridging CO groups are bonded to only one metal atom
Show answer
Answer: B. After CO donates a lone pair (σ bond), the metal back-donates electron density from a filled d orbital into the empty π* orbital of CO. This π back bonding strengthens the M-C bond. Bridging CO groups join two metal atoms.
-
5. The stepwise constants for forming a hypothetical ML₃ are k₁ = 10⁵, k₂ = 10⁴ and k₃ = 10². What is log β?
- 11
- 9
- 20
- 7
Show answer
Answer: A. log β = log k₁ + log k₂ + log k₃ = 5 + 4 + 2 = 11. So β = 10¹¹ and the instability constant α = 10⁻¹¹.
Sign in to keep track of the lessons you finish.