- Practice
- About 16 min
- 5 practice questions
Naming coordination compounds the IUPAC way
Name complexes and write formulae from names using the IUPAC rules the Tamil Nadu textbook follows: ligand names, prefixes, alphabetical order, the '-ate' ending and the oxidation state in Roman numerals.
If something looks wrong, please tell us.
By the end of this lesson you can
- Give the IUPAC ligand names for common anions and neutral molecules.
- Use di/tri/tetra and bis/tris/tetrakis correctly.
- Name the metal correctly in cationic, neutral and anionic complexes.
- Name a complete coordination compound and write a formula from its name.
Old names such as Zeise's salt, K[PtCl₃(C₂H₄)], or Magnus's green salt, [Pt(NH₃)₄][PtCl₄], tell you nothing about the structure. The International Union of Pure and Applied Chemistry (IUPAC) gives a system, and the Tamil Nadu textbook follows its 2005 recommendations.
The order of names
- Name the cation first, then the anion, whether the ion is simple or complex: K₄[Fe(CN)₆] starts with potassium; [Co(NH₃)₆]Cl₃ starts with the complex cation and ends with chloride.
- Simple ions are named as in ordinary salts: sodium, potassium, chloride, nitrate, sulphate.
- Inside a complex ion, name the ligands first (in alphabetical order), then the metal, then its oxidation state in Roman numerals in brackets.
Naming ligands
Anionic ligands end in -o. Neutral ligands keep their molecular names, except four special names: H₂O aqua, NH₃ ammine (two m's), CO carbonyl, NO nitrosyl. A cationic ligand ends in -ium.
| Ligand | Formula | IUPAC name | Donor atoms |
|---|---|---|---|
| Chloride, bromide, fluoride | Cl⁻, Br⁻, F⁻ | chlorido, bromido, fluorido | 1 |
| Cyanide | CN⁻ | cyanido (cyanido-κC when bound through C) | 1 |
| Hydroxide | OH⁻ | hydroxido | 1 |
| Nitrite through N / through O | NO₂⁻ / ONO⁻ | nitrito-κN / nitrito-κO | 1 (ambidentate) |
| Thiocyanate through S / through N | SCN⁻ / NCS⁻ | thiocyanato-κS / thiocyanato-κN | 1 (ambidentate) |
| Oxalate (ox) | C₂O₄²⁻ | oxalato | 2 |
| Carbonate, sulphate | CO₃²⁻, SO₄²⁻ | carbonato, sulphato | 1 or 2 |
| Ethylenediamine (en) | H₂N-CH₂-CH₂-NH₂ | ethane-1,2-diamine | 2 |
| EDTA | EDTA⁴⁻ | 2,2',2'',2'''-(ethane-1,2-diyldinitrilo)tetraacetato | 6 |
| Pyridine (py); triphenylphosphine | C₅H₅N; P(C₆H₅)₃ | pyridine; triphenylphosphane | 1 |
An ambidentate ligand can bind through either of two different atoms. The Greek letter κ (kappa) followed by the donor atom's symbol shows which one is used.
Prefixes and the metal's name
- Use di, tri, tetra, penta, hexa for several identical simple ligands.
- If the ligand name already contains a number word (ethane-1,2-diamine) or is long, use bis, tris, tetrakis and put the ligand name in brackets: tris(ethane-1,2-diamine).
- Prefixes are ignored when alphabetising: in tetraamminedichlorido, 'ammine' (a) comes before 'chlorido' (c).
- In a cationic or neutral complex the metal keeps its name: cobalt, nickel, chromium.
- In an anionic complex the metal name ends in -ate: cobaltate, nickelate, chromate, zincate, aluminate; some use Latin roots: iron → ferrate, copper → cuprate, silver → argentate, gold → aurate, lead → plumbate, tin → stannate.
Cation before anion; ligands (alphabetical, prefixes ignored) before metal; '-ate' only when the complex is an anion; oxidation state in Roman numerals at the end of the metal's name.
Steps to name a complex
- Find cation and anion Which part is in square brackets?
- Name each ligand Anions end in -o; aqua, ammine, carbonyl, nitrosyl
- Add prefixes di/tri or bis/tris
- Alphabetise ligands Ignore the prefixes
- Name the metal Add -ate if the complex is an anion
- Oxidation state Roman numerals in brackets
Worked example 1: [Co(NH₃)₅Cl]SO₄
Cation: the complex [Co(NH₃)₅Cl]²⁺ (sulphate is 2−). Ligands: five NH₃ = pentaammine; one Cl⁻ = chlorido; 'ammine' before 'chlorido'. Metal in a cation: cobalt. Oxidation state: x + 5(0) + (−1) = +2, so x = +3. Name: pentaamminechloridocobalt(III) sulphate.
Worked example 2: K₃[Fe(C₂O₄)₃]
Cation: potassium. Anion: [Fe(C₂O₄)₃]³⁻. Ligand: three oxalato = trioxalato. The complex is an anion, so iron becomes ferrate. Oxidation state: x + 3(−2) = −3, x = +3. Name: potassium trioxalatoferrate(III).
Worked example 3: [Ni(en)₃]Cl₂ and Na[Co(NH₃)₂Cl₄]
[Ni(en)₃]²⁺: en is neutral, so x = +2; the ligand name contains 'di', so use tris. Name: tris(ethane-1,2-diamine)nickel(II) chloride. For Na[Co(NH₃)₂Cl₄], the anion is [Co(NH₃)₂Cl₄]⁻: x + 0 + 4(−1) = −1, x = +3. Alphabetical: ammine before chlorido. Name: sodium diamminetetrachloridocobaltate(III).
Worked example 4: from name to formula
Tetraamminediaquacobalt(III) chloride. Working: four NH₃ and two H₂O, all neutral, with Co³⁺ give the complex a charge of +3. Three Cl⁻ balance it. Formula: [Co(NH₃)₄(H₂O)₂]Cl₃. Similarly, potassium hexacyanidochromate(III): six CN⁻ (−6) with Cr³⁺ gives −3, so three K⁺: K₃[Cr(CN)₆].
When both ions are complex, name each in turn: [Cr(NH₃)₆][Co(CN)₆] is hexaamminechromium(III) hexacyanidocobaltate(III). A neutral complex is one word with no ion name, e.g. [Pt(NH₃)₂Cl₂] is diamminedichloridoplatinum(II).
Key takeaways: chlorido, cyanido, hydroxido, oxalato; aqua, ammine, carbonyl, nitrosyl. Bis/tris for complex ligand names. Alphabetise without prefixes. '-ate' marks an anionic complex. Always work out the oxidation state from the charges before writing the name.
Check your understanding
-
1. What is the IUPAC name of [Cu(NH₃)₄]SO₄?
- Tetraamminecuprate(II) sulphate
- Tetraamminecopper(II) sulphate
- Copper tetraammine sulphate
- Tetraaminecopper(IV) sulphate
Show answer
Answer: B. The complex is a cation, so copper keeps its name (no -ate). NH₃ is 'ammine' with two m's. Oxidation state: x + 0 = +2, so copper(II). Name: tetraamminecopper(II) sulphate.
-
2. Which is the correct name of K₂[PtCl₆]?
- Potassium hexachloridoplatinum(IV)
- Potassium hexachloridoplatinate(II)
- Potassium hexachloridoplatinate(IV)
- Dipotassium platinum hexachloride
Show answer
Answer: C. The complex ion is [PtCl₆]²⁻, an anion, so platinum becomes platinate. x + 6(−1) = −2 gives x = +4. Name: potassium hexachloridoplatinate(IV).
-
3. In naming [Co(NH₃)₄(H₂O)Cl]²⁺, in what order are the ligands written?
- aqua, ammine, chlorido
- chlorido, aqua, ammine
- ammine, chlorido, aqua
- ammine, aqua, chlorido
Show answer
Answer: D. Alphabetise by the ligand names, ignoring prefixes: ammine (a-m), aqua (a-q), chlorido (c). So: tetraammineaquachloridocobalt(III) ion.
-
4. Which formula matches 'hexaamminecobalt(III) hexacyanidochromate(III)'?
- [Co(NH₃)₆][Cr(CN)₆]
- [Cr(CN)₆][Co(NH₃)₆]
- [Co(NH₃)₆Cr(CN)₆]
- [Co(NH₃)₆]₃[Cr(CN)₆]
Show answer
Answer: A. The cation is named first: hexaamminecobalt(III) = [Co(NH₃)₆]³⁺. The anion is hexacyanidochromate(III) = [Cr(CN)₆]³⁻. Charges +3 and −3 balance 1 : 1, and the cation is written first: [Co(NH₃)₆][Cr(CN)₆].
-
5. Why is 'tris' rather than 'tri' used in tris(ethane-1,2-diamine)cobalt(III) chloride?
- Because en is an anionic ligand
- Because cobalt has oxidation state +3
- Because the ligand's name already contains a number word (di)
- Because the complex is a cation
Show answer
Answer: C. When a ligand's own name contains di, tri and so on, the alternative prefixes bis, tris, tetrakis are used, with the ligand name in brackets, to avoid confusion. It has nothing to do with the charge.
Sign in to keep track of the lessons you finish.