• Practice
  • About 20 min
  • 5 practice questions

Valence bond theory and crystal field splitting

Use valence bond theory to predict hybridisation, shape and spin-only magnetic moment, then see how crystal field theory splits the d orbitals in octahedral and tetrahedral fields and orders ligands in the spectrochemical series.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the assumptions of valence bond theory (VBT) and match coordination number with hybridisation and shape.
  • Tell inner orbital (low spin) from outer orbital (high spin) octahedral complexes and calculate the spin-only magnetic moment.
  • Describe how an octahedral and a tetrahedral field split the five d orbitals.
  • Calculate the crystal field splitting energy from an absorption wavenumber and use the spectrochemical series.

Werner treated metal-ligand bonding as Lewis acid-base bonding but could not explain colour or magnetism. Linus Pauling's valence bond theory treats the metal-ligand bond as covalent. Bethe and Van Vleck developed the crystal field theory (CFT), which treats it as electrostatic. Ligand field and molecular orbital theories go further, but this unit uses VBT and CFT.

Assumptions of valence bond theory

  1. The ligand → metal bond is a covalent bond in which the ligand provides both electrons.
  2. Each ligand has at least one filled orbital with a lone pair.
  3. The metal provides as many vacant orbitals as its coordination number.
  4. These vacant orbitals hybridise to give equivalent hybrid orbitals.
  5. Each hybrid orbital overlaps a filled ligand orbital to form a coordinate σ bond; greater overlap gives a stronger bond.
  6. Hybrid orbitals are directional, so they fix the shape.
  7. If (n−1)d orbitals are used (d²sp³) the complex is inner orbital (low spin, spin paired); if nd orbitals are used (sp³d²) it is outer orbital (high spin, spin free).
  8. Unpaired electrons make a complex paramagnetic; if all are paired it is diamagnetic.
  9. Ligands such as CO, CN⁻, en and NH₃ force the metal's electrons to pair (strong field ligands).
Coordination number, hybridisation and shape
CNHybridisationShapeExample
2spLinear[Ag(CN)₂]⁻
3sp²Trigonal planar[HgI₃]⁻
4sp³Tetrahedral[Ni(CO)₄], [NiCl₄]²⁻
4dsp²Square planar[Ni(CN)₄]²⁻, [Pt(NH₃)₄]²⁺
5dsp³Trigonal bipyramidal[Fe(CO)₅]
6d²sp³ (inner d)Octahedral[Co(NH₃)₆]³⁺, [Fe(CN)₆]³⁻
6sp³d² (outer d)Octahedral[FeF₆]³⁻, [CoF₆]³⁻

Spin-only magnetic moment μs = √[n(n + 2)] BM, where n is the number of unpaired electrons. n = 1, 2, 3, 4, 5 gives 1.73, 2.83, 3.87, 4.90, 5.92 BM.

— BM = Bohr magneton

Worked example 1: [Co(NH₃)₆]³⁺ and [FeF₆]³⁻

[Co(NH₃)₆]³⁺: Co is [Ar]3d⁷4s², so Co³⁺ is 3d⁶. NH₃ is treated as a strong field ligand, so the six d electrons pair into three 3d orbitals, leaving two 3d orbitals empty. Two 3d + one 4s + three 4p → d²sp³, octahedral, inner orbital. Unpaired electrons n = 0, so μs = 0: diamagnetic. [FeF₆]³⁻: Fe³⁺ is 3d⁵. F⁻ is weak field, so the five electrons stay unpaired in five 3d orbitals. The metal uses 4s, three 4p and two 4d → sp³d², octahedral, outer orbital. n = 5, μs = √(5 × 7) = √35 = 5.92 BM.

Worked example 2: [NiCl₄]²⁻ against [Ni(CN)₄]²⁻

Ni²⁺ is 3d⁸ (two unpaired electrons). With weak field Cl⁻ no pairing occurs, so 4s and 4p are used: sp³, tetrahedral, n = 2, μs = √(2 × 4) = √8 = 2.83 BM, paramagnetic. With strong field CN⁻ the two unpaired electrons pair, freeing one 3d orbital: dsp², square planar, n = 0, diamagnetic. Same metal ion, different ligand, different shape and magnetism.

Limitations of VBT: it does not explain colour; it considers only spin-only magnetic moments; and it cannot say quantitatively why the same metal gives inner orbital complexes with some ligands and outer orbital complexes with others, for example diamagnetic [Fe(CN)₆]⁴⁻ but paramagnetic [FeF₆]⁴⁻.

Crystal field theory

  • The metal-ligand bond is purely ionic: electron-rich ligands attract the electron-poor metal.
  • Ions are treated as point charges and neutral ligands (or metal atoms) as dipoles.
  • Step 1: in a free gaseous ion the five d orbitals are degenerate. A spherical shell of ligand charge would raise all five equally by repulsion.
  • Step 2: the ligands actually approach along definite directions, so some d orbitals are repelled more than others. The d orbitals split (crystal field splitting).
  • Step 3: attraction between metal ion and ligands lowers the overall energy; this drives complex formation.

Octahedral field: six ligands approach along ±x, ±y, ±z. The d(x²−y²) and d(z²) orbitals point straight at them and rise in energy: the e_g set, raised by +3/5 Δo. The d(xy), d(yz), d(zx) orbitals point between the axes: the t₂g set, lowered by −2/5 Δo. The average energy (barycentre) is unchanged: 2(+0.6Δo) + 3(−0.4Δo) = 1.2Δo − 1.2Δo = 0. Δo is the octahedral crystal field splitting energy.

Tetrahedral field: four ligands approach along the body diagonals of a cube. No orbital points directly at them, but the t₂ set (dxy, dyz, dzx) lies closer to their path than the e set (dx²−y², dz²). So the splitting is inverted: t₂ rises by +2/5 Δt and e falls by −3/5 Δt, and the splitting is smaller.

Δt = (4/9) Δo. Octahedral: e_g up by 0.6Δo, t₂g down by 0.4Δo. Tetrahedral: t₂ up by 0.4Δt, e down by 0.6Δt.

Splitting of d orbitals

  • Octahedral field
    • Higher set: e_g (dx²−y², dz²), +0.6Δo
    • Lower set: t₂g (dxy, dyz, dzx), −0.4Δo
    • Larger splitting, Δo
  • Tetrahedral field
    • Higher set: t₂ (dxy, dyz, dzx), +0.4Δt
    • Lower set: e (dx²−y², dz²), −0.6Δt
    • Smaller splitting, Δt = 4/9 Δo

Measuring Δ and the spectrochemical series

A complex absorbs light whose energy equals Δ. So Δ = hν = hc/λ = hcν̄, where ν̄ is the absorption wavenumber. Multiply by Avogadro's number for a per-mole value.

Worked example 3: Δo from a wavenumber

A complex (illustrative value) absorbs most strongly at ν̄ = 16000 cm⁻¹ = 1.6 × 10⁶ m⁻¹. Working: Δ = hcν̄ = (6.626 × 10⁻³⁴ J s)(3.0 × 10⁸ m s⁻¹)(1.6 × 10⁶ m⁻¹) = 31.80 × 10⁻²⁰ J = 3.180 × 10⁻¹⁹ J per ion. Per mole: 3.180 × 10⁻¹⁹ J × 6.022 × 10²³ mol⁻¹ = 1.915 × 10⁵ J mol⁻¹ = 191.5 kJ mol⁻¹. Remember to convert cm⁻¹ to m⁻¹ by multiplying by 100. In a tetrahedral field the same metal and ligands would give about 4/9 × 16000 ≈ 7100 cm⁻¹.

Spectra of titanium(III) complexes show Br⁻ < F⁻ < H₂O in splitting power. Many such measurements give the spectrochemical series (increasing Δ, as given in the textbook): I⁻ < Br⁻ < SCN⁻ < Cl⁻ < S²⁻ < F⁻ < OH⁻ ≈ urea < ox²⁻ < H₂O < NCS⁻ < EDTA⁴⁻ < NH₃ < en < NO₂⁻ < CN⁻ < CO. Ligands at the right (CO, CN⁻) are strong field; those at the left (I⁻, Br⁻) are weak field.

Key takeaways: VBT gives hybridisation, shape and spin-only moment; d²sp³ = inner orbital/low spin, sp³d² = outer orbital/high spin. CFT splits d orbitals: octahedral t₂g below e_g, tetrahedral inverted and smaller (Δt = 4/9 Δo). Δ = hcν̄, and the spectrochemical series ranks ligands by Δ.

Check your understanding

  1. 1. According to VBT, what are the hybridisation and magnetic behaviour of [Fe(CN)₆]⁴⁻?

    1. sp³d², paramagnetic with 4 unpaired electrons
    2. dsp², diamagnetic
    3. d²sp³, diamagnetic
    4. sp³, paramagnetic
    Show answer

    Answer: C. Fe²⁺ is 3d⁶. CN⁻ is a strong field ligand, so all six electrons pair in three 3d orbitals, leaving two 3d orbitals free for d²sp³ hybridisation (octahedral, inner orbital). No unpaired electrons, so it is diamagnetic.

  2. 2. The spin-only magnetic moment of the tetrahedral ion [FeCl₄]⁻ is about 5.9 BM. What does VBT predict?

    1. sp³ hybridisation with 5 unpaired electrons
    2. dsp² hybridisation with 1 unpaired electron
    3. d²sp³ hybridisation with 3 unpaired electrons
    4. sp³ hybridisation with 3 unpaired electrons
    Show answer

    Answer: A. √[n(n+2)] = 5.9 gives n = 5 (√35 = 5.92). Fe³⁺ is 3d⁵ with all five electrons unpaired, so no 3d orbital is free; four ligands therefore use 4s and three 4p orbitals: sp³, tetrahedral.

  3. 3. In an octahedral field, which orbitals form the higher energy e_g set?

    1. dxy and dyz
    2. dxy, dyz and dzx
    3. dzx and dz²
    4. dx²−y² and dz²
    Show answer

    Answer: D. The ligands approach along the x, y and z axes. dx²−y² and dz² have lobes pointing along the axes, straight at the ligands, so they are repelled most and rise by 0.6Δo.

  4. 4. For a metal ion with Δo = 18000 cm⁻¹ for a given set of ligands, roughly what is Δt for a tetrahedral complex with the same ligands?

    1. 40500 cm⁻¹
    2. 8000 cm⁻¹
    3. 18000 cm⁻¹
    4. 12000 cm⁻¹
    Show answer

    Answer: B. Δt = (4/9)Δo = (4/9) × 18000 = 4 × 2000 = 8000 cm⁻¹. Tetrahedral splitting is always smaller because there are only four ligands and none point directly at a d orbital.

  5. 5. Which ordering of crystal field splitting power is correct according to the spectrochemical series?

    1. CN⁻ < NH₃ < H₂O < Cl⁻
    2. H₂O < Cl⁻ < NH₃ < CO
    3. Cl⁻ < H₂O < NH₃ < CN⁻
    4. NH₃ < CN⁻ < Cl⁻ < H₂O
    Show answer

    Answer: C. In the series, halides are weak (Cl⁻ low), H₂O is in the middle, NH₃ is stronger, and CN⁻ and CO are the strongest. So Cl⁻ < H₂O < NH₃ < CN⁻.

Privacy · Terms · Refunds · Delivery