- Practice
- About 25 min
- 5 practice questions
Buffer solutions, buffer index and the Henderson-Hasselbalch equation
Explain how acidic and basic buffers resist changes in pH, define the buffer index, derive the Henderson-Hasselbalch equation and use it to calculate and plan buffer pH.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define a buffer solution and give examples of acidic and basic buffers.
- Explain buffer action with equations for added acid and added base.
- Define buffer capacity and the buffer index β = dB/d(pH).
- Derive and use pH = pKa + log([salt]/[acid]) and pOH = pKb + log([salt]/[base]).
Human blood stays close to the same pH even though cells keep producing acids. The carbonic acid-hydrogen carbonate pair in blood makes this possible through buffer action. Buffers are also used to keep the pH steady in laboratory analysis, in fermentation and in many industrial processes.
What a buffer is
A buffer solution is a mixture of a weak acid and its conjugate base, or of a weak base and its conjugate acid. It resists a large change in pH when small amounts of acid or base are added; this ability is buffer action.
- Acidic buffer: a weak acid and its salt, for example acetic acid with sodium acetate.
- Basic buffer: a weak base and its salt, for example ammonium hydroxide with ammonium chloride.
How buffer action works
To resist change in both directions, a buffer must contain a component that can remove added H⁺ and one that can remove added OH⁻, and the two must not consume each other. In an acetic acid-sodium acetate buffer there is plenty of CH₃COOH and plenty of CH₃COO⁻ (from the salt).
- Acid added: CH₃COO⁻(aq) + H⁺(aq) → CH₃COOH(aq). The H⁺ is locked up in the weak, barely dissociated acid, so the pH hardly falls.
- Base added: CH₃COOH(aq) + OH⁻(aq) → CH₃COO⁻(aq) + H₂O(l). The OH⁻ is turned into water and the acid's equilibrium re-adjusts, so the pH hardly rises.
In a basic buffer of NH₄OH and NH₄Cl, added H⁺ is removed by NH₄OH + H⁺ → NH₄⁺ + H₂O, and added OH⁻ by NH₄⁺ + OH⁻ → NH₄OH. These are the same shifts as in the common ion effect.
Acetic acid-sodium acetate buffer
-
Small amount of strong acid added
- H⁺ meets the CH₃COO⁻ reserve
- CH₃COO⁻ + H⁺ → CH₃COOH
- [salt] falls a little, [acid] rises a little
- pH falls only slightly
-
Small amount of strong base added
- OH⁻ meets the CH₃COOH reserve
- CH₃COOH + OH⁻ → CH₃COO⁻ + H₂O
- [acid] falls a little, [salt] rises a little
- pH rises only slightly
The Henderson-Hasselbalch equation
From Ka = [H₃O⁺][A⁻] ÷ [HA], the hydronium ion concentration in an acidic buffer is [H₃O⁺] = Ka × [acid] ÷ [base], where [base] is the conjugate base. The weak acid dissociates very little, and the common ion suppresses it further, so [acid] at equilibrium is almost the concentration of acid taken; and almost all the conjugate base comes from the salt, so [base] ≈ [salt]. Hence [H₃O⁺] = Ka × [acid] ÷ [salt]. Take logarithms: log[H₃O⁺] = log Ka + log([acid]/[salt]). Change the signs: −log[H₃O⁺] = −log Ka − log([acid]/[salt]), that is pH = pKa − log([acid]/[salt]).
Acidic buffer: pH = pKa + log([salt]/[acid]). Basic buffer: pOH = pKb + log([salt]/[base]). When [salt] = [acid], pH = pKa.
Because only the ratio of the concentrations appears, adding a little acid or base changes the pH by only a little: a small change in a ratio near 1 gives a tiny change in its logarithm. For acetic acid, Ka = 1.8 × 10⁻⁵, so pKa = 5 − log 1.8 = 5 − 0.26 = 4.74.
Worked example 1: testing a buffer
One litre of buffer contains 0.50 M CH₃COOH and 0.50 M CH₃COONa (pKa = 4.74). Its pH = 4.74 + log(0.50/0.50) = 4.74 + 0 = 4.74. Now add 0.02 mol solid NaOH (volume change negligible). Working: CH₃COOH + OH⁻ → CH₃COO⁻ + H₂O uses 0.02 mol of acid and makes 0.02 mol of salt, so [acid] = 0.50 − 0.02 = 0.48 M and [salt] = 0.50 + 0.02 = 0.52 M. pH = 4.74 + log(0.52/0.48) = 4.74 + log 1.083 = 4.74 + 0.035 = 4.77. The same NaOH in one litre of pure water would give [OH⁻] = 0.02 M, pOH = 1.70 and pH 12.30: a jump of more than five units instead of 0.03.
Worked example 2: a buffer made from masses
4.5 g of acetic acid (CH₃COOH, molar mass 60 g mol⁻¹) and 4.1 g of sodium acetate (CH₃COONa, 82 g mol⁻¹) are dissolved and made up to 250 mL. Find the pH (pKa = 4.74). Working: moles of acid = 4.5 ÷ 60 = 0.075 mol, so [acid] = 0.075 ÷ 0.250 L = 0.30 M. Moles of salt = 4.1 ÷ 82 = 0.050 mol, so [salt] = 0.050 ÷ 0.250 = 0.20 M. pH = 4.74 + log(0.20/0.30) = 4.74 + log 0.667 = 4.74 − 0.18 = 4.56.
Worked example 3: a basic buffer
Find the pH of a solution 0.20 M in NH₄OH and 0.10 M in NH₄Cl (pKb = 4.74, 25 °C). Working: pOH = pKb + log([salt]/[base]) = 4.74 + log(0.10/0.20) = 4.74 − 0.30 = 4.44. pH = 14 − 4.44 = 9.56.
Worked example 4: planning a buffer
How much sodium acetate must be dissolved in 1 L of 0.10 M acetic acid to make a buffer of pH 5.04? Working: 5.04 = 4.74 + log([salt]/0.10), so log([salt]/0.10) = 0.30 and [salt]/0.10 = antilog 0.30 = 2.0 (since log 2 = 0.30). [salt] = 0.20 M, that is 0.20 mol in 1 L. Mass = 0.20 mol × 82 g mol⁻¹ = 16.4 g.
Buffer capacity and buffer index
Every buffer can be overwhelmed if enough acid or base is added. Its buffer capacity is its ability to resist change. Van Slyke defined the buffer index β as a measure of it: the number of gram equivalents of acid or base that must be added to one litre of buffer to change its pH by one unit, β = dB ÷ d(pH), where dB is the gram equivalents added per litre and d(pH) the change in pH. A larger β means a better buffer; a buffer is most effective when [salt] and [acid] are similar and both fairly concentrated.
Worked example 5: buffer index
Adding 0.01 gram equivalent of NaOH to one litre of a buffer raises its pH from 4.74 to 4.79. Working: β = dB ÷ d(pH) = 0.01 ÷ (4.79 − 4.74) = 0.01 ÷ 0.05 = 0.2 gram equivalent per litre per pH unit.
Key takeaways: a buffer holds a weak acid with its conjugate base (or a weak base with its conjugate acid), so each component neutralises one kind of addition. pH = pKa + log([salt]/[acid]) and pOH = pKb + log([salt]/[base]); only the ratio matters. β = dB/d(pH) measures buffer capacity.
Check your understanding
-
1. Which of these mixtures is a buffer solution?
- HCl and NaCl
- NaOH and NaCl
- CH₃COOH and CH₃COONa
- Equal amounts of HCl and NaOH
Show answer
Answer: C. A buffer needs a weak acid and its conjugate base. Acetic acid with sodium acetate fits. HCl is a strong acid, NaOH a strong base, and equal HCl and NaOH just give a neutral NaCl solution with no reserve of acid or base.
-
2. A buffer has [salt]/[acid] = 10 and the acid's pKa is 4.74. What is its pH?
- 4.74
- 3.74
- 6.74
- 5.74
Show answer
Answer: D. pH = pKa + log([salt]/[acid]) = 4.74 + log 10 = 4.74 + 1 = 5.74. A ratio of 1/10 would give 3.74.
-
3. What is the pH at 25 °C of a buffer containing equal concentrations of NH₄OH and NH₄Cl (pKb = 4.74)?
- 4.74
- 9.26
- 7.00
- 9.74
Show answer
Answer: B. With [salt] = [base], log 1 = 0, so pOH = pKb = 4.74. pH = 14 − 4.74 = 9.26. Choosing 4.74 forgets that the Henderson equation for a basic buffer gives pOH.
-
4. Adding 0.02 gram equivalent of HCl to one litre of a buffer lowers its pH by 0.10. What is the buffer index?
- 0.2
- 0.002
- 5
- 2
Show answer
Answer: A. β = dB ÷ d(pH) = 0.02 ÷ 0.10 = 0.2 (the size of the change is used). The value 5 comes from dividing the wrong way round.
-
5. What volume of 0.5 M sodium formate must be mixed with 100 mL of 0.5 M formic acid to give a buffer of pH = pKa + 0.30? (log 2 = 0.30)
- 100 mL
- 50 mL
- 200 mL
- 400 mL
Show answer
Answer: C. log([salt]/[acid]) = 0.30, so the ratio is 2. Both are in the same final volume, so the mole ratio is also 2. Acid = 100 mL × 0.5 M = 50 mmol, so salt = 100 mmol, which needs 100 mmol ÷ 0.5 M = 200 mL.
Sign in to keep track of the lessons you finish.