• Practice
  • About 24 min
  • 5 practice questions

Weak acids and bases, Ostwald's dilution law and the common ion effect

Derive Ostwald's dilution law Ka = α²C, use α = √(Ka/C) and [H⁺] = √(KaC) to find the degree of dissociation and pH of weak acids and bases, and explain the common ion effect.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write Ka for a weak acid and Kb for a weak base.
  • Derive Ostwald's dilution law and the approximate forms α = √(Ka/C) and [H⁺] = √(KaC).
  • Calculate the degree of dissociation, Ka or Kb, and the pH of weak acid and weak base solutions.
  • Explain, with Le Chatelier's principle, how a common ion suppresses the dissociation of a weak electrolyte.

For a strong acid, [H₃O⁺] is simply the concentration of the acid. A weak acid such as acetic acid dissociates only partly, so we need its equilibrium constant to find how many ions are present. This lesson builds the tools for that, and then shows how adding a salt can push the dissociation back even further.

Dissociation constants of weak acids and bases

For a weak monobasic acid HA: HA + H₂O ⇌ H₃O⁺ + A⁻. The equilibrium constant is Kc = [H₃O⁺][A⁻] ÷ ([HA][H₂O]). In dilute solution water is in large excess, so [H₂O] is a constant K; writing H₃O⁺ simply as H⁺ and combining the two constants (Kc × K) gives the dissociation constant of the acid, Ka = [H⁺][A⁻] ÷ [HA]. For a weak base BOH ⇌ B⁺ + OH⁻, in the same way Kb = [B⁺][OH⁻] ÷ [BOH]. Like all equilibrium constants, Ka and Kb change only with temperature.

Ostwald's dilution law

The degree of dissociation α is the fraction of the total moles of a substance that has dissociated at equilibrium: moles dissociated = α × total moles. Take acetic acid of concentration C mol dm⁻³: CH₃COOH ⇌ H⁺ + CH₃COO⁻.

Setting up the equilibrium for a weak acid of concentration C
StageCH₃COOHH⁺CH₃COO⁻
Initial moles100
Moles at equilibrium1 − ααα
Equilibrium concentration(1 − α)CαCαC

Substituting: Ka = (αC)(αC) ÷ [(1 − α)C] = α²C ÷ (1 − α). A weak acid dissociates very little, so α is small compared with 1 and 1 − α ≈ 1. Then Ka = α²C, which rearranges to α = √(Ka/C). And since [H⁺] = αC = √(Ka/C) × C:

Ka = α²C, α = √(Ka/C), [H⁺] = √(Ka C). For a weak base: Kb = α²C, α = √(Kb/C), [OH⁻] = √(Kb C).

— Ostwald's dilution law (for α ≪ 1)

Because α = √(Ka/C), α grows as C falls. If the solution is diluted 100 times, C becomes 1/100 and α becomes √100 = 10 times larger. The statement when dilution increases, the degree of dissociation of a weak electrolyte also increases is Ostwald's dilution law. Note that [H⁺] = √(KaC) still falls on dilution: more of the acid is dissociated, but the ions are spread through more water.

Worked example 1: dilution and α

A weak acid has Ka = 1.0 × 10⁻⁵. Find α at 0.1 M and at 0.001 M. Working: at 0.1 M, α = √(1.0 × 10⁻⁵ ÷ 0.1) = √(1.0 × 10⁻⁴) = 0.01 (1%). At 0.001 M, α = √(1.0 × 10⁻⁵ ÷ 10⁻³) = √(1.0 × 10⁻²) = 0.1 (10%). A 100-fold dilution has made α ten times larger, exactly as the law predicts.

Worked example 2: Ka from the degree of dissociation

A 0.05 M solution of a weak acid is 2.0% dissociated at 25 °C. Find Ka. Working: α = 2.0 ÷ 100 = 2.0 × 10⁻². Ka = α²C = (2.0 × 10⁻²)² × 0.05 = 4.0 × 10⁻⁴ × 5 × 10⁻² = 2.0 × 10⁻⁵.

Worked example 3: pH of a weak acid

Find the pH and percentage dissociation of 0.2 M formic acid (Ka = 1.8 × 10⁻⁴). Working: [H⁺] = √(KaC) = √(1.8 × 10⁻⁴ × 0.2) = √(3.6 × 10⁻⁵) = 6.0 × 10⁻³ M. pH = −log(6.0 × 10⁻³) = 3 − log 6 = 3 − 0.778 = 2.22. α = [H⁺] ÷ C = 6.0 × 10⁻³ ÷ 0.2 = 0.03, that is 3%. Check: α = √(Ka/C) = √(9.0 × 10⁻⁴) = 0.03, the same. Compare 0.2 M HCl, pH 0.70: the weak acid gives far fewer H⁺ ions.

Worked example 4: a weak base

Find the pH of 0.02 M ammonium hydroxide (Kb = 1.8 × 10⁻⁵). Working: [OH⁻] = √(KbC) = √(1.8 × 10⁻⁵ × 0.02) = √(3.6 × 10⁻⁷) = 6.0 × 10⁻⁴ M. pOH = 4 − log 6 = 4 − 0.778 = 3.22. pH = 14 − 3.22 = 10.78. Ionisation = 6.0 × 10⁻⁴ ÷ 0.02 × 100 = 3%.

The common ion effect

Add sodium acetate to a solution of acetic acid. The acid sets up the equilibrium CH₃COOH ⇌ H⁺ + CH₃COO⁻, while the salt dissociates completely: CH₃COONa → Na⁺ + CH₃COO⁻. The acetate ion is common to both, so its concentration rises sharply. By Le Chatelier's principle the equilibrium shifts to remove the stress: the extra acetate ions combine with H⁺ to form un-ionised CH₃COOH, so the equilibrium moves to the left. The suppression of the dissociation of a weak electrolyte by adding a strong electrolyte that contains a common ion is the common ion effect. Adding NH₄Cl to NH₄OH works in the same way, with NH₄⁺ as the common ion.

How a common ion suppresses dissociation

  1. Weak acid at equilibrium CH₃COOH ⇌ H⁺ + CH₃COO⁻
  2. Add CH₃COONa fully dissociated, adds much CH₃COO⁻
  3. Stress on the equilibrium [CH₃COO⁻] has risen
  4. Shift to the left CH₃COO⁻ + H⁺ → CH₃COOH
  5. Result α and [H⁺] fall; pH rises

Worked example 5: measuring the effect

Compare α for 0.1 M acetic acid (Ka = 1.8 × 10⁻⁵) alone and with 0.1 M sodium acetate. Alone: α = √(1.8 × 10⁻⁵ ÷ 0.1) = √(1.8 × 10⁻⁴) = 1.34 × 10⁻², about 1.3%. With the salt: [CH₃COO⁻] ≈ 0.1 M (from the salt) and [CH₃COOH] ≈ 0.1 M, so [H⁺] = Ka × [CH₃COOH] ÷ [CH₃COO⁻] = 1.8 × 10⁻⁵ × 0.1 ÷ 0.1 = 1.8 × 10⁻⁵ M, and α = 1.8 × 10⁻⁵ ÷ 0.1 = 1.8 × 10⁻⁴, about 0.018%. The common ion has cut the dissociation about 75 times (1.34 × 10⁻² ÷ 1.8 × 10⁻⁴ ≈ 74).

Key takeaways: for a weak electrolyte Ka (or Kb) = α²C when α ≪ 1, so α = √(K/C) and [H⁺] = √(KaC) or [OH⁻] = √(KbC). Dilution raises α (Ostwald's dilution law). A common ion pushes the equilibrium back and lowers α.

Check your understanding

  1. 1. Ostwald's dilution law states that, for a weak electrolyte,

    1. the dissociation constant increases on dilution
    2. the hydrogen ion concentration increases on dilution
    3. the degree of dissociation increases on dilution
    4. the degree of dissociation does not depend on concentration
    Show answer

    Answer: C. From α = √(Ka/C), lowering C raises α. Ka is a constant at a fixed temperature, and [H⁺] = √(KaC) actually falls as C falls.

  2. 2. A weak acid has Ka = 1.0 × 10⁻⁶. What is its degree of dissociation in a 0.01 M solution?

    1. 1.0 × 10⁻⁴
    2. 1.0 × 10⁻²
    3. 1.0 × 10⁻³
    4. 1.0 × 10⁻⁸
    Show answer

    Answer: B. α = √(Ka/C) = √(1.0 × 10⁻⁶ ÷ 1.0 × 10⁻²) = √(1.0 × 10⁻⁴) = 1.0 × 10⁻² (1%). The value 1.0 × 10⁻⁴ is [H⁺], not α.

  3. 3. What is the pH of the same 0.01 M solution of the acid with Ka = 1.0 × 10⁻⁶?

    1. 2
    2. 3
    3. 4
    4. 6
    Show answer

    Answer: C. [H⁺] = √(KaC) = √(1.0 × 10⁻⁶ × 1.0 × 10⁻²) = √(1.0 × 10⁻⁸) = 1.0 × 10⁻⁴ M, so pH = 4. pH 2 would be correct only for a strong acid of this concentration.

  4. 4. What happens when solid ammonium chloride is dissolved in aqueous ammonia (NH₄OH)?

    1. The ionisation of NH₄OH is suppressed and the pH falls.
    2. The ionisation of NH₄OH increases and the pH rises.
    3. Kb of NH₄OH decreases.
    4. Nothing changes, because NH₄Cl is a salt.
    Show answer

    Answer: A. NH₄⁺ is the common ion. Extra NH₄⁺ shifts NH₄OH ⇌ NH₄⁺ + OH⁻ to the left, so [OH⁻] falls and the solution becomes less basic (pH falls). Kb itself depends only on temperature.

  5. 5. A 0.1 M solution of a weak monobasic acid has pH 3. What is its Ka?

    1. 1.0 × 10⁻⁶
    2. 1.0 × 10⁻³
    3. 1.0 × 10⁻²
    4. 1.0 × 10⁻⁵
    Show answer

    Answer: D. [H⁺] = 10⁻³ M. From [H⁺] = √(KaC), Ka = [H⁺]² ÷ C = (10⁻³)² ÷ 0.1 = 10⁻⁶ ÷ 10⁻¹ = 1.0 × 10⁻⁵. Check: α = 10⁻³ ÷ 0.1 = 0.01, small enough for the approximation.

Privacy · Terms · Refunds · Delivery