- Practice
- About 26 min
- 5 practice questions
Salt hydrolysis and solubility product
Predict whether a salt solution is acidic, basic or neutral, use Kh, the degree of hydrolysis and the pH formulas for hydrolysed salts, and apply Ksp to solubility and precipitation.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain salt hydrolysis as the reverse of neutralisation and predict the nature of four kinds of salt solution.
- Derive Kh × Ka = Kw and use h = √(Kh/C) and the pH formulas for hydrolysed salts.
- Write Ksp for a sparingly soluble salt and relate it to the molar solubility s.
- Compare the ionic product with Ksp to decide whether a precipitate forms.
A solution of a salt need not be neutral. Washing soda solution feels slippery and turns red litmus blue; ammonium chloride solution turns blue litmus red. The reason is that some ions of a salt react with water. The second half of the lesson turns to salts that hardly dissolve at all, which matter in qualitative analysis and even in the formation of kidney stones (calcium salts such as calcium oxalate precipitating over time).
Salt hydrolysis
An acid and a base react to form a salt and water (neutralisation). A salt dissociates completely in water and its ions are hydrated. When the cation, the anion or both react with water, the reaction is called salt hydrolysis; it is the reverse of neutralisation. Whether an ion reacts depends on how strong its parent acid or base is.
| Salt of | Example | Ion that hydrolyses | Solution | pH at 25 °C |
|---|---|---|---|---|
| Strong acid + strong base | NaNO₃, NaCl | None | Neutral | 7 |
| Weak acid + strong base | CH₃COONa | Anion: CH₃COO⁻ + H₂O ⇌ CH₃COOH + OH⁻ | Basic | 7 + ½pKa + ½log C |
| Strong acid + weak base | NH₄Cl | Cation: NH₄⁺ + H₂O ⇌ NH₄OH + H⁺ | Acidic | 7 − ½pKb − ½log C |
| Weak acid + weak base | CH₃COONH₄ | Both ions | Depends on Ka and Kb | 7 + ½pKa − ½pKb |
Strong acid and strong base (NaNO₃). NO₃⁻ is the conjugate base of a strong acid, so it has no tendency to take H⁺; Na⁺ is the conjugate acid of a strong base and has no tendency to take OH⁻. There is no hydrolysis, [H⁺] = [OH⁻] and the solution is neutral.
Weak acid and strong base (anionic hydrolysis). In CH₃COONa solution, CH₃COO⁻ (conjugate base of a weak acid) takes H⁺ from water: CH₃COO⁻ + H₂O ⇌ CH₃COOH + OH⁻, so [OH⁻] > [H⁺] and pH > 7. The hydrolysis constant is Kh = [CH₃COOH][OH⁻] ÷ [CH₃COO⁻]. Multiply it by Ka = [CH₃COO⁻][H⁺] ÷ [CH₃COOH]: everything cancels except [H⁺][OH⁻], so Kh × Ka = Kw. As in Ostwald's law, with degree of hydrolysis h and salt concentration C, Kh = h²C, so h = √(Kh/C) and [OH⁻] = √(Kh C). Then pH = 14 + log[OH⁻] = 14 + ½log Kw − ½log Ka + ½log C = 14 − 7 + ½pKa + ½log C, so pH = 7 + ½pKa + ½log C.
Strong acid and weak base (cationic hydrolysis). In NH₄Cl solution, NH₄⁺ reacts: NH₄⁺ + H₂O ⇌ NH₄OH + H⁺, while Cl⁻ does not, so [H⁺] > [OH⁻] and pH < 7. In the same way Kh × Kb = Kw, Kh = h²C, [H⁺] = √(Kh C) = √(Kw C/Kb), and pH = 7 − ½pKb − ½log C.
Weak acid and weak base. In ammonium acetate both CH₃COO⁻ and NH₄⁺ hydrolyse. If Ka > Kb the solution is acidic, if Ka < Kb it is basic, and if Ka = Kb it is neutral. Here Kh × Ka × Kb = Kw and pH = 7 + ½pKa − ½pKb, which does not depend on the concentration.
Kh × Ka = Kw (anion hydrolysis); Kh × Kb = Kw (cation hydrolysis); Kh × Ka × Kb = Kw (both). h = √(Kh/C).
Worked example 1: sodium acetate
For 0.01 M CH₃COONa (Ka = 1.8 × 10⁻⁵, pKa = 4.74) find Kh, h and the pH. Working: Kh = Kw ÷ Ka = 1 × 10⁻¹⁴ ÷ 1.8 × 10⁻⁵ = 5.56 × 10⁻¹⁰. h = √(Kh/C) = √(5.56 × 10⁻¹⁰ ÷ 0.01) = √(5.56 × 10⁻⁸) = 2.36 × 10⁻⁴. pH = 7 + ½(4.74) + ½log(0.01) = 7 + 2.37 + ½(−2) = 7 + 2.37 − 1 = 8.37, basic as expected.
Worked example 2: ammonium chloride and ammonium formate
(a) 0.1 M NH₄Cl, pKb = 4.74: pH = 7 − ½(4.74) − ½log(0.1) = 7 − 2.37 − ½(−1) = 7 − 2.37 + 0.50 = 5.13. (b) Ammonium formate, with pKa (formic acid) = 3.75 and pKb (NH₄OH) = 4.74: pH = 7 + ½(3.75) − ½(4.74) = 7 + 1.875 − 2.37 = 6.51. The solution is slightly acidic because formic acid (larger Ka) is stronger than ammonium hydroxide is as a base.
Solubility product
A sparingly soluble salt such as AgCl or PbCl₂ in contact with its saturated solution sets up a heterogeneous equilibrium between the solid and its ions. For a general salt XₘYₙ: XₘYₙ(s) ⇌ mXⁿ⁺(aq) + nYᵐ⁻(aq). The concentration of a pure solid is constant and is left out, giving the solubility product: Ksp = [Xⁿ⁺]ᵐ[Yᵐ⁻]ⁿ. The solubility product of a compound is the product of the molar concentrations of its ions, each raised to the power of its coefficient in the balanced equilibrium equation.
Ionic product and precipitation. The ionic product has the same form as Ksp, but it uses the concentrations at the moment of mixing (or at any time t), not equilibrium ones.
Comparing the ionic product (IP) with Ksp
-
IP > Ksp
- Supersaturated
- Precipitate forms until IP = Ksp
-
IP = Ksp
- Saturated
- Solid and ions at equilibrium
-
IP < Ksp
- Unsaturated
- No precipitate; more solid can dissolve
Ksp from molar solubility. The molar solubility s is the maximum number of moles of solute that dissolve in one litre of solution. One mole of XₘYₙ gives m moles of Xⁿ⁺ and n moles of Yᵐ⁻, so [Xⁿ⁺] = ms and [Yᵐ⁻] = ns. Then Ksp = (ms)ᵐ(ns)ⁿ = mᵐ nⁿ sᵐ⁺ⁿ. For example, AgCl or BaSO₄ (1 : 1): Ksp = s². Ag₂CrO₄ or CaF₂ (2 : 1 or 1 : 2): Ksp = (2s)²(s) = 4s³. Ca₃(PO₄)₂: Ksp = (3s)³(2s)² = 27 × 4 s⁵ = 108s⁵.
For XₘYₙ: Ksp = mᵐ nⁿ sᵐ⁺ⁿ. Precipitation happens only when the ionic product exceeds Ksp.
Worked example 3: Ksp from solubility in g L⁻¹
Practice data (made up for this example): the solubility of AgCl is 1.435 × 10⁻³ g L⁻¹ (molar mass 143.5 g mol⁻¹). Working: s = 1.435 × 10⁻³ ÷ 143.5 = 1.0 × 10⁻⁵ mol L⁻¹. AgCl(s) ⇌ Ag⁺ + Cl⁻, so Ksp = s² = (1.0 × 10⁻⁵)² = 1.0 × 10⁻¹⁰ mol² L⁻². For Ag₂CrO₄ with s = 6.5 × 10⁻⁵ mol L⁻¹: Ksp = 4s³ = 4 × (6.5 × 10⁻⁵)³ = 4 × 2.75 × 10⁻¹³ = 1.1 × 10⁻¹² mol³ L⁻³.
Worked example 4: will a precipitate form?
10 mL of 2.0 × 10⁻³ M BaCl₂ is mixed with 10 mL of 2.0 × 10⁻³ M Na₂SO₄. Take Ksp of BaSO₄ = 1.1 × 10⁻¹⁰. Working: mixing doubles the volume, so each concentration halves: [Ba²⁺] = 1.0 × 10⁻³ M and [SO₄²⁻] = 1.0 × 10⁻³ M. Ionic product = (1.0 × 10⁻³)(1.0 × 10⁻³) = 1.0 × 10⁻⁶. Since 1.0 × 10⁻⁶ > 1.1 × 10⁻¹⁰, BaSO₄ precipitates.
Key takeaways: salts of a weak acid give basic solutions, salts of a weak base give acidic ones, and for weak acid + weak base salts the pH depends on Ka against Kb. Kh × Ka = Kw, h = √(Kh/C). Ksp = mᵐnⁿsᵐ⁺ⁿ; compare the ionic product (after mixing) with Ksp to predict precipitation.
Check your understanding
-
1. An aqueous solution of potassium cyanide (KCN) is
- acidic, because K⁺ hydrolyses
- neutral, because KCN is a salt
- basic, because CN⁻ hydrolyses
- acidic, because CN⁻ hydrolyses
Show answer
Answer: C. KCN is the salt of a weak acid (HCN) and a strong base (KOH). The CN⁻ ion takes H⁺ from water: CN⁻ + H₂O ⇌ HCN + OH⁻, so [OH⁻] > [H⁺] and the solution is basic. K⁺ does not hydrolyse.
-
2. What is the pH of a 0.1 M solution of the sodium salt of a weak acid with pKa = 5.0, at 25 °C?
- 9.0
- 8.0
- 5.0
- 10.0
Show answer
Answer: A. pH = 7 + ½pKa + ½log C = 7 + 2.5 + ½(−1) = 7 + 2.5 − 0.5 = 9.0.
-
3. How is Ksp of calcium phosphate, Ca₃(PO₄)₂, related to its molar solubility s?
- Ksp = 6s⁵
- Ksp = s⁵
- Ksp = 36s⁵
- Ksp = 108s⁵
Show answer
Answer: D. Ca₃(PO₄)₂ ⇌ 3Ca²⁺ + 2PO₄³⁻, so [Ca²⁺] = 3s and [PO₄³⁻] = 2s. Ksp = (3s)³(2s)² = 27s³ × 4s² = 108s⁵.
-
4. Two solutions are mixed and the ionic product of a salt comes out greater than its Ksp. What follows?
- The solution is unsaturated and nothing happens.
- The salt precipitates until the ionic product equals Ksp.
- Ksp increases to match the ionic product.
- The salt dissolves further.
Show answer
Answer: B. When the ionic product exceeds Ksp the solution is supersaturated, and the salt comes out as a precipitate until the ion concentrations fall to the equilibrium values. Ksp itself depends only on temperature.
-
5. For the salt of a weak acid (Ka = 1 × 10⁻⁵) and a weak base (Kb = 1 × 10⁻⁵) at 25 °C, what is the hydrolysis constant Kh?
- 1 × 10⁻⁹
- 1 × 10⁻¹⁹
- 1 × 10⁻⁴
- 1 × 10⁴
Show answer
Answer: C. Kh = Kw ÷ (Ka × Kb) = 1 × 10⁻¹⁴ ÷ (1 × 10⁻⁵ × 1 × 10⁻⁵) = 1 × 10⁻¹⁴ ÷ 1 × 10⁻¹⁰ = 1 × 10⁻⁴. With Ka = Kb the solution is neutral: pH = 7 + ½(5) − ½(5) = 7.
Sign in to keep track of the lessons you finish.