• Practice
  • About 17 min
  • 5 practice questions

Manganese, copper, bauxite, precious metals and non-metallic minerals

Describe the properties, uses and leading producers of manganese, copper, bauxite, gold and platinum, and of the non-metallic minerals mica and phosphate, using the textbook's 2016 production data.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why manganese is essential for steel and how copper forms useful alloys.
  • Describe bauxite, gold and platinum and their leading producers.
  • Describe the uses of mica and phosphate.

Iron alone does not make a modern economy. Steel needs manganese, electrical systems need copper, aircraft need aluminium from bauxite, and farms need phosphate. This lesson surveys these minerals, their uses and where they are produced, using the figures the Tamil Nadu textbook takes from World Mining Data 2018 (production in 2016).

Manganese

Manganese is a ferro-alloy used to make special-quality steel. A little added to iron removes gases and acts as a cleanser during steel-making; the textbook says nearly 6 kg is used per tonne of steel. It makes steel hard, tough, corrosion-resistant and durable, and is also used in alloys with copper, bronze and nickel and in bleaching powder, insecticides and paints. According to the textbook, South Africa is the largest producer (about 30.84% in 2016), followed by Australia, China, Gabon and Brazil; India is the eighth largest producer although it holds very large reserves.

Copper

Copper is a non-ferrous, soft, brown metal and an excellent conductor. It occurs as native metal, as oxides and as sulphides; copper pyrite is the chief ore. It is extracted by crushing, concentration, roasting, smelting and refining. One of the first metals people used, it is soft, but alloyed it becomes harder and tougher:

Copper + tin = bronze. Copper + zinc = brass.

Copper is used in electrical engineering, metallurgy, alloys, pipes, radiators and ornaments. According to the textbook, Chile is the largest producer (27.20% of world output in 2016), followed by Peru (11.53%), China, the USA and Congo, while India's share was only about 0.15%.

Bauxite

Bauxite is the main source of aluminium. It lies close to the surface and is mined by the open-cast method. Aluminium is used in buildings, utensils and aircraft parts. The great producers lie in tropical and subtropical regions, where intense weathering forms bauxite. The textbook names Australia as the largest producer, followed by China, Brazil, Guinea and India (fifth).

Gold and platinum

Gold occurs in alluvial (placer) deposits or as reefs and lodes underground. It is used in jewellery, dentistry, medicine and industry, and its purity is expressed in carats. Iron pyrite is called fool's gold because it looks like gold. The textbook lists China, Australia, Russia, the USA and Canada as the leading producers. Platinum is rare, costlier than gold, very dense (about twice as dense as lead), with a very high melting point, and occurs with osmium, palladium, iridium and rhodium. According to the textbook's data, South Africa produced about 71.75% of the world's platinum in 2016.

Non-metallic minerals

Two non-metallic minerals

  • Mica
    • From Latin micare, to shine
    • Splits into very thin sheets
    • Resists heat, water, acids; insulates high voltage
    • Used in paints, cosmetics, electronics, vehicles, construction
  • Phosphate
    • Occurs in sedimentary rocks or nodules
    • Also from guano (bird droppings) in Peru and Chile
    • Main source of phosphorus
    • Mainly used in fertilisers; China leads production

The textbook also lists Indian agencies involved in exploring and mining minerals, among them the Geological Survey of India (GSI), ONGC, MECL, NMDC and NALCO.

Worked example 1: reading production shares

The textbook's copper table gives Chile 27.20% and Peru 11.53%. Together = 27.20 + 11.53 = 38.73%, a little under two-fifths of world copper from two Andean countries. Chile's share is 27.20 ÷ 11.53 ≈ 2.36 times Peru's. India's 0.15% is 27.20 ÷ 0.15 ≈ 181 times smaller than Chile's.

Worked example 2: match the alloy

A temple bell maker wants a hard metal from copper: add tin to make bronze. A plumber wants a tough, corrosion-resistant fitting: copper and zinc make brass. A steel maker wants hard, clean, anti-corrosive steel: add manganese.

Key takeaways: manganese cleanses and hardens steel; copper conducts electricity and forms bronze and brass; bauxite gives aluminium and is mined open-cast in the tropics; gold is measured in carats and platinum is rarer and denser; mica insulates and phosphate fertilises. Production leaders here are those the textbook gives for 2016.

Check your understanding

  1. 1. Why is a small amount of manganese added during steel-making?

    1. To make the steel radioactive
    2. To remove gases and act as a cleanser, making steel hard and anti-corrosive
    3. To lower the melting point of iron to zero
    4. To turn steel into brass
    Show answer

    Answer: B. Manganese removes gases, acts as a cleanser and makes steel hard, tough and corrosion-resistant.

  2. 2. Copper mixed with zinc gives:

    1. bronze
    2. steel
    3. solder
    4. brass
    Show answer

    Answer: D. Copper + zinc = brass; copper + tin = bronze.

  3. 3. Bauxite is generally mined by the open-cast method because:

    1. it occurs quite near the surface
    2. it is found only in deep veins
    3. it is a liquid
    4. it occurs under the sea
    Show answer

    Answer: A. The textbook states that bauxite occurs quite near the surface, so open-cast mining is used.

  4. 4. Guano deposits, a source of phosphate, are found in the deserts of:

    1. Australia and India
    2. Peru and Chile
    3. Sahara and Kalahari
    4. Gobi and Thar
    Show answer

    Answer: B. The textbook places guano deposits in the Peruvian and Chilean deserts of South America.

  5. 5. According to the textbook's 2016 data, Chile produced 27.20% of world copper and the USA 7.00%. Roughly how many times the US output was Chile's?

    1. About 2 times
    2. About 20 times
    3. About 3.9 times
    4. About 7 times
    Show answer

    Answer: C. 27.20 ÷ 7.00 ≈ 3.89, so Chile produced about 3.9 times as much copper as the USA.

Privacy · Terms · Refunds · Delivery