• Practice
  • About 17 min
  • 5 practice questions

Minerals, their occurrence and iron ore

Define a mineral, classify minerals into metallic and non-metallic, describe how minerals occur in veins and lodes, beds, residual masses and alluvial deposits, and explain the types, distribution and production of iron ore.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define a mineral and an ore, and classify minerals.
  • Describe the four modes of occurrence of minerals.
  • Name the types of iron ore and the leading iron ore regions and producers.

From a pin to a ship, almost everything we use is made from minerals. Ages of human progress are even named after them: the Stone, Copper, Bronze and Iron Ages. Minerals are exhaustible and unevenly spread, so where they occur matters greatly.

Minerals and ores

A mineral is a homogeneous, naturally occurring substance with a definite chemical composition, identified by its physical properties and chemical make-up. Minerals are usually found in ores, accumulations of a mineral mixed with other elements and impurities. The useful mineral is separated from the ore by several processes. Minerals are non-renewable and very unevenly distributed, and a country's economic development depends heavily on them.

Classification of minerals

  • Metallic
    • Ferrous: iron ore, manganese
    • Non-ferrous: copper, bauxite
    • Precious: gold, platinum
  • Non-metallic
    • Mica, phosphate
  • Energy (fuel) minerals
    • Coal, petroleum, natural gas

Modes of occurrence

How minerals occur
ModeHow it formsExamples
Veins and lodesMinerals fill cracks, crevices, faults and joints in igneous and metamorphic rocks; small occurrences are veins, large ones lodesCopper, gold
Beds or layersDeposition, accumulation and concentration in horizontal layersCoal, potash
Residual massWeathering removes soluble matter, leaving a mass rich in oreBauxite
Alluvial depositsIn sands of valley floors and at the foot of hillsGold, silver, platinum

Iron ore

Iron ore is the basic mineral and the backbone of industrial development. Iron rarely occurs free; it is part of many rocks and minerals and, according to the textbook, makes up about 4.6% of the earth's crust. Ores are graded by iron content; an ore with less than 30% iron is considered uneconomical. Iron is mixed with fixed proportions of manganese, nickel, chromium or vanadium to make different steels.

Types of iron ore
OreIron content (as in the textbook)
Magnetiteabout 72%: the richest
Hematiteabout 70%
Limoniteabout 50%; colour dark brown to yellow
Sideriteabout 30%; brown

(The textbook gives magnetite as red and hematite as black; in fact magnetite is black and magnetic, and hematite is reddish, which is how it gets its name from the Greek for blood.)

Distribution and production

Good-quality iron ore occurs in Australia, Brazil, Russia, China, the USA, Ukraine and Canada. The textbook states that Russia has the largest reserves and Australia is the largest producer, followed by China, Brazil, India and Russia; citing World Mining Data 2018 for 2016, it reports these five produced about 84% of the world's iron ore, with Australia's share about 33.72%. Named fields include Mt Whaleback and Mt Goldsworthy (Australia), Itabira (Brazil), the Mesabi range (USA), Krivoi Rog (Ukraine), and in India Bastar (Chhattisgarh), Odisha, Kudremukh and Chitradurga.

Worked example 1: which ore is best?

A steel plant can buy 1,000 tonnes of hematite (70% iron) or 1,400 tonnes of limonite (50% iron). Iron in hematite = 1,000 × 0.70 = 700 t. Iron in limonite = 1,400 × 0.50 = 700 t. The iron is the same, but the plant must transport and smelt 400 tonnes more limonite, so hematite is cheaper to use. Siderite at 30% would need 700 ÷ 0.30 = 2,333 t of ore, which is why low-grade ore is often uneconomical.

Worked example 2: identify the mode of occurrence

Gold grains are panned from river sand at the foot of a hill: alluvial deposit. A thick horizontal seam of coal lies between layers of sandstone: bed or layer. A reddish, crumbly layer rich in aluminium ore remains after heavy tropical weathering removed other minerals: residual mass (bauxite). A thin band of copper ore fills a crack in granite: vein.

Key takeaways: minerals have definite composition and occur in ores; they are metallic (ferrous, non-ferrous, precious), non-metallic or energy minerals. They occur in veins and lodes, beds, residual masses and alluvial deposits. Iron ore, the backbone of industry, is graded from magnetite (richest) to siderite; Australia leads production according to the textbook's 2016 data.

Check your understanding

  1. 1. Bauxite usually occurs as a:

    1. vein in igneous rock
    2. residual mass of weathered material
    3. horizontal coal-like bed
    4. placer deposit in river sand
    Show answer

    Answer: B. When decomposed rocks lose their soluble particles to water, a mass rich in ore is left behind; bauxite forms this way.

  2. 2. Which iron ore has the highest iron content?

    1. Siderite
    2. Limonite
    3. Hematite
    4. Magnetite
    Show answer

    Answer: D. Magnetite has about 72% iron, hematite about 70%, limonite about 50% and siderite about 30%.

  3. 3. An ore with how little iron content is considered uneconomical, according to the textbook?

    1. Less than 30%
    2. Less than 70%
    3. Less than 50%
    4. Less than 90%
    Show answer

    Answer: A. The textbook states that if the iron content of an ore is less than 30%, it is considered uneconomical.

  4. 4. Minerals occurring in small amounts in cracks of igneous and metamorphic rocks are called:

    1. lodes
    2. beds
    3. veins
    4. alluvial deposits
    Show answer

    Answer: C. Smaller occurrences in cracks, crevices, faults and joints are veins; larger ones are lodes.

  5. 5. How many tonnes of limonite (50% iron) contain the same iron as 600 tonnes of magnetite (72% iron)?

    1. 432 tonnes
    2. 864 tonnes
    3. 1,200 tonnes
    4. 300 tonnes
    Show answer

    Answer: B. Iron in magnetite = 600 × 0.72 = 432 t. Limonite needed = 432 ÷ 0.50 = 864 t.

Privacy · Terms · Refunds · Delivery