- Practice
- About 17 min
- 5 practice questions
Renewable energy and the conservation of resources
Describe hydel, solar, wind, tidal and geothermal energy with the textbook's Indian and Tamil Nadu examples, and explain why and how resources must be conserved.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain how hydel, solar, wind, tidal and geothermal energy are produced.
- Name the textbook's Indian and Tamil Nadu examples of renewable energy.
- List practical ways of conserving resources.
Demand for energy is rising fast while conventional sources are limited and depleting. This twin problem is why non-conventional sources, which are renewable, clean and non-polluting, are gaining importance. Tamil Nadu is a leader in several of them.
Hydel power
Hydroelectricity uses the potential energy of water falling from a height: the falling water spins turbine blades that drive generators. It is clean and renewable. According to the textbook, China has the largest hydel potential and is the largest producer.
Solar energy
Solar power converts sunlight into electricity, mainly with photovoltaic cells, or uses the sun's heat to make steam. It is abundant but has grown only recently with better technology. The textbook highlights the Noor complex in Morocco's Sahara as a very large concentrated solar plant and, in Tamil Nadu, the Kamuthi solar power project in Ramanathapuram district: a 648 MW photovoltaic station on about 2,500 acres, completed in 2016, which the book describes as the world's largest single-location solar plant at that time.
Wind energy
Wind turbines convert the energy of moving air into electricity. Wind is clean, free and widely available. The textbook names Muppandal in Kanyakumari district, Tamil Nadu and the Jaisalmer wind park in Rajasthan as India's largest wind farms. It distinguishes:
Two kinds of wind energy
-
Onshore
- Turbines on land
- One of the most affordable renewable sources
- Needs a large area
-
Offshore
- Wind farms in seas and oceans
- UK and Germany lead; London Array is large
- An offshore farm was planned near Dhanushkodi, Tamil Nadu
Tidal and geothermal energy
Tidal energy uses the regular rise and fall of the sea, captured with tidal streams, barrages or lagoons. The first tidal power station was at La Rance, France; the textbook names Sihwa Lake in South Korea as the largest. In India, the Gulf of Kutch, the Gulf of Cambay and the Sundarbans (Ganga delta) are identified as potential sites. Geothermal energy uses the natural heat of the earth. The Geysers in California is the largest development; in India the Geological Survey of India has identified many locations, the most promising being Puga valley in Ladakh.
| Source | What drives it | Example from the textbook |
|---|---|---|
| Hydel | Falling water turns turbines | China, the leading producer |
| Solar | Sunlight converted to electricity | Kamuthi, Ramanathapuram |
| Wind | Moving air turns turbines | Muppandal, Kanyakumari |
| Tidal | Rise and fall of tides | La Rance, France; Gulf of Kutch (potential) |
| Geothermal | Heat from inside the earth | The Geysers, USA; Puga valley, Ladakh |
Conservation of resources
Minerals take millions of years to form, but we use them far faster than nature replaces them. They are finite, so they must be conserved. The textbook lists these ways:
- Controlling population growth to reduce demand.
- Creating social awareness of the importance of conservation.
- Reusing and recycling resources.
- Using renewable sources of energy instead of non-renewable ones.
- Developing methods of use that minimise waste.
- Spreading awareness of the environmental harm caused by products.
- Choosing products with less packaging.
Recycling keeps metals in use
- Mine and refine Ore becomes metal
- Make products Cans, pipes, wires
- Use Products serve people
- Collect Scrap is gathered
- Recycle Scrap is melted and refined again
Then back to step 1: Mine and refine
Worked example 1: choose the renewable source
A coastal district with steady strong winds from the sea: wind, as at Muppandal. A dry, sunny inland district with cheap open land: solar, as at Kamuthi. A mountain valley with hot springs: geothermal, as at Puga. A narrow bay with a very large tidal range: tidal. Matching the source to the local geography is the key skill.
Worked example 2: how recycling stretches a reserve
Suppose (made-up figures) a country uses 100 units of a metal a year from a reserve of 2,000 units, so the reserve lasts 2,000 ÷ 100 = 20 years. If 40% of the metal used each year comes back from recycling, new mining falls to 100 − 40 = 60 units a year, and the reserve lasts 2,000 ÷ 60 ≈ 33 years. Recycling has stretched the reserve by about 13 years.
Key takeaways: renewable sources include hydel, solar, wind, tidal and geothermal energy; Tamil Nadu has major solar (Kamuthi) and wind (Muppandal) sites. Because minerals form far more slowly than we use them, conservation through recycling, renewables, less waste and awareness is essential.
Check your understanding
-
1. Muppandal, one of India's largest wind farms, is in which district of Tamil Nadu?
- Ramanathapuram
- Kanyakumari
- Coimbatore
- Thoothukudi
Show answer
Answer: B. The textbook names Muppandal in Kanyakumari district and Jaisalmer in Rajasthan as India's largest wind farms.
-
2. Hydroelectricity is produced by using:
- the potential energy of water falling from a height
- the heat of the earth's interior
- the rise and fall of tides
- the burning of natural gas
Show answer
Answer: A. Falling water spins turbine blades, converting its potential energy into electricity.
-
3. The first tidal power station in the world was at:
- Sihwa Lake, South Korea
- The Geysers, USA
- La Rance, France
- Gulf of Kutch, India
Show answer
Answer: C. The textbook states the first tidal power station was at La Rance in France; Sihwa Lake is named the largest.
-
4. The most promising geothermal site in India named in the textbook is:
- Kamuthi
- Muppandal
- Jaisalmer
- Puga valley, Ladakh
Show answer
Answer: D. Among the geothermal locations identified by the GSI, the textbook calls Puga valley in Ladakh the most promising.
-
5. Why must mineral resources be conserved?
- They regenerate faster than we use them
- They take millions of years to form, far slower than our rate of use
- They are found everywhere
- They are all renewable
Show answer
Answer: B. Minerals form over millions of years; the replenishment rate is very slow compared with consumption, so they are finite and must be conserved.
Sign in to keep track of the lessons you finish.